Ventilation duct distributor

Alu Injektor

Condition: good (used), Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings Gtjdpfx Aoffphbeg Tjt -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: Aluminum -Transport dimensions: 493/465/H495 mm -Weight: 13 kg

Condition: used, machine/vehicle number: 008131, Max. panel width: 4400 mm Gtsdpfsw Idh Hex Ag Tet Max. panel length: 4400 mm Main saw blade projection: 75 mm No of Grippers: 7

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, feed length X-axis: 4,300 mm, feed length Y-axis: 4,300 mm, cutting length (max.): 4,300 mm, cutting height with scoring (max.): 4,300 mm, saw blade diameter: 380 mm, HPP 380/43/43, fully automatec loading with TBP 200/31/22/ Main motor 18.5 kW Machine works perffectly, possible test run Holzma Profi HPP 380 Cutting length: 4,300 mm Cutting width (program-controlled pusher travel): 4,250 mm Air cushion table: 2,160 x 650 mm, 3 pcs. + 1* 2,810 mm length Central blower: 1 unit with increased blower performance 2 additional alignment devices Technical Data: Saw blade projection: 95 mm Saw carriage feed: forwards 1–130 m/min, backwards constant 130 m/min Main saw motor: 18 kW Scoring saw motor: 2.2 kW, VVSH aggregate, program-controlled, vertically rising Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating for main saw motor 18 kW: 24 kW Power Control CADmatic 4.0 control with 17-inch flat display Godexvz T Ijpfx Ag Tstt Labeling with part graphics / label program / label printer PICA 104

Condition: used, BRANDT highflex 1440 edge bander well equipped, Initial milling cutters glue application pneumatic preliminary guillotine pressure rollers finished cutting saws top-bottom milling unit 2 x finishing unit profile scraper Gtsdpfxev H D S So Ag Tot flat scraper polisher the machine has nc milling cutter control and a pneumatic package max. element height 60mm max. veneer thickness in a roll 3mm max. feed 14m/min the machine is functional, can be tested before purchase

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,200 h, functionality: fully functional, Panel dividing saw Holzma HPP 380 Profiline with automatic labeller. Godpfxsxytlkj Ag Tott

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Features and technical data: - Extendable workpiece support - Joint milling unit FG201 with 2 milling heads incl. DIA cutters - Fully automatic edge feed 1903 Gsdpexavr Hefx Ag Tstt - Glue application system cartridge GlueJet 301 with automatic glue height adjustment (sensor-controlled nozzle) - Special accessory: pressure regulation of cartridge contact pressure - Pressure section 1912-3 pneumatic, first roller driven with pneumatic plunge control - End trimming unit 1918, pneumatic adjustment - Milling unit FR 201 multifunctional milling unit for flush, radius, and radius run-out incl. DIA cutters - Corner copying unit 1832 up to 3 mm edge thickness incl. DIA cutter - Scraper unit 1929 with 2 scraper holders - Chip collection box - Surface scraper 1964 Minimum workpiece length (mm): 160 Workpiece thickness (mm): 6 - 45 Edge thickness (mm): 0.4 - 3 Feed speed (m/min): 10 Total length (mm): 4630 Weight (kg): 1250 Availability: short notice Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Single-sided edge banding machine Manufacturer: Brandt Model: KDF 660 Gtedjxl Ufvopfx Ag Tst Year of manufacture: 2005 Max. edge thickness: approx. 12 mm Max. workpiece thickness: 60 mm Max. coil material thickness: 3 mm Equipped with: - Pre-milling unit - Coil magazine - Glue application unit - End trimming unit - Top/bottom flush and radius milling - Top/bottom radius milling with front/rear edge copying - Radius scraper - Buffing station Feed speed max. approx. 16 m/min. Connection: 400 V, 50 Hz, 3 Ph Total connected load: approx. 15 kW

Condition: like new (used), functionality: fully functional, Panel Dividing System SCHEER FM 16 – DNC 3100 x 3100 As New – Machine No. 33542 The SCHEER FM 16 is a high-performance, electronically controlled panel dividing saw featuring advanced drive technology and an intuitive control interface. The machine has been fully overhauled and newly painted – its condition is virtually as new. Ideal for precise, automated cutting of wood-based panels in continuous industrial operation. Gtodpfjunwk Tsx Ag Tst Main Technical Data: • Cutting length: 3100 mm • Cutting depth / Blade projection: 80 mm • Saw motor: 7.0 kW • Scoring motor: 1.1 kW (can be switched off) • Feed speed: 2 – 40 m/min (steplessly adjustable) • Return: Rapid traverse, automatic lowering • Operator interface: SCHEERWIN, graphical, document-oriented (64-bit) on Windows 10 • Drive system: Küenle frequency inverter with Stöber synchronous servo drives incl. absolute encoder – for highest positioning accuracy and dynamic control Features & Highlights: • FM 16-3100 longitudinal cutting saw with hardened guides and automatic forward/reverse travel • HP 5021 material feed table with 6 clamping carriages, servo drive & measuring resolution of 0.05 mm • WP angular pressure system, 2400 mm adjustment range, fully automatic • SP 5000 remnant cutting device for offcuts down to min. 5 mm • HP 5024 miter fence table (1800 x 800 mm), steel angle with Pertinax overlay • HP 5025 workpiece support table (1800 x 800 mm), also with Pertinax overlay • Air cushion system in the front tables, including radial fan Saw blades included: • KSB 4005 for main saw (ø 305 mm, Z = 60) • KSB 4006 for scorer (ø 200 mm) Condition & Service: • Condition: Overhauled & as new • Functionality: Fully operational • Warranty: 12 months Reliability in Continuous Operation: This machine is in use worldwide – even under extreme conditions. Whether in the dry climates of Africa or the humid environments of Southeast Asia (e.g., Thailand), the SCHEER FM 16 operates reliably in 3-shift systems – 365 days a year – and stands out for its superior precision, stability, and durability. Warranty: We are so confident in the quality and robustness of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electrical supplier components and wear parts.) Flexibility & Customization: We offer various models and equipment options – to fit every budget. We also realize custom tailored solutions based on your individual requirements. 📞 Contact us for an individual offer or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning and training optionally available.

Condition: used, Paint mist extraction, water irrigated system - Producer Reinox - Type WW 25/22 - Width 2.600 mm Gtjdpeumvtqofx Ag Tst - Height 1.700 mm (2.250) mm - Depth 1.640 mm - Required space 2,75 x 2.45x1,65m mm - With irrigated exhaust system - With water circulating pump - Motor power 4,2 kW - Exhaust pipe 2 x 350 mm - With switch cabinet - In stainless steel - Voltage / HZ 400 / 500 - Location on stock - Voltage fluctuation max. +/- 5 %

Condition: reconditioned (used), Refurbished edge banding machine BRANDT AMBITION 1440 Gjdpsw S E Rqofx Ag Tott