Hydr. Press brake

ATLANTIC HPAT 30/200

Condition: good (used), Year of construction: 2002, machine/vehicle number: V020113, operating hours: 43,000 h, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with cnc control, Model Amada HFT 8025 downstoke CNC Press brake Year 2002 Tonnage 80 KN Bedouwktnepfx Abnown Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 9kw Weight 5750 kg Bed Length 2500 mm Bed Width 180 mm Open Height 470 mm Throat Depth 420 mm CNC Control

Condition: new, functionality: fully functional, Comparable with Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 320 t (also available in many other configurations!) Approach speed 140 mm/s Bodpouf Nr Aofx Abnewn Bending speed max. 10 mm/s Return speed 130 mm/s Y-axis stroke 400 mm Open height 650 mm Throat depth 450 mm Clear gap between frames 2555 mm Machine length 3785 mm Machine width 2290 mm Width without support arms 1740 mm Overall height 3100 mm Table height 920 mm Motor power 22 kW Oil tank capacity 300 l Machine weight 14,450 kg (Specifications may vary depending on equipment) Standard equipment: 3 CNC axes (Y1, Y2, X) Press beam double-guided, stable and precise Robust double-guided backgauge Backgauge fingers double-guided on linear rails Movable front arms with height adjustment Side and rear safety guards 60mm lower die adapter rail Manual upper tool clamping system (Promecam system) Foot switch with emergency stop 380 V, 50-60 Hz, 3 phase LED lighting Additional equipment: Delem DA 66t CNC control R-axis (backgauge) CNC controlled CNC-controlled crowning Fiessler Akas 2M laser safety device 2 additional backgauge fingers (total 4) 1 set of top and bottom tooling - Further processing lengths and capacities available upon request with appropriate accessories! -

Condition: new, Year of construction: 2024, machine/vehicle number: 302340, Profile Bending machine KB Türkei model MB 30 bottom shaft 30 mm top shaft 35 mm two rollers driven with basement capacity: up to round tube 48 x 3,0 mm Bweded S Uf Sopfx Abnsn flat material 50x10 mm square tube 40x40x3,0 mm weight 170 kg motor 0,75 kw 400 Volt 50 Hz 3 ph.

Condition: good (used), Year of construction: 1998, functionality: fully functional, pressing force: 35 t, working width: 2,000 mm, pressure 35to max. bending length 2000mm Bwsdpfx Ajwagykobnsn arrester behind drive capacity 4,5 kW weight 3000kg

Condition: good (used), Year of construction: 1999, Machine is in good condition. X 750 mm Y 400 mm Bedpswx Rafefx Abnjwn Z 500 mm 10.000 rpm

Year of construction: 1979, condition: used, throat: 22/29 mm drive motor: bei 380 V ca. 0,55 kW space needed: 450 x 500 x 560 mm weight: ca. 6,5 kg Bwsdpozif Sjfx Abnen pressure power: 30 kN

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm Bjdpjv Tpxqjfx Abnjwn -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Condition: good (used), Year of construction: 2010, Press brake, bending machine, bending machine, swing bending machine, die bending machine Bodpexxz E Nofx Abnjwn -Machine: can be viewed while powered on -CNC press brake: with 3 axes and laser safety system -Working width: 3200 mm -Pressure force: 125 tons -Max. stroke of the bending beam: 160 mm -Distance between the stands: 2700 mm -Backgauge travel: 590 mm -Backgauge: 2 axes electronically movable, 1 axis manually movable Accessories: see pictures -Installation dimensions: 2140/5195/H2530 mm -Transport dimensions: 1680/5195/H2530 mm -Weight: 9300 kg

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm Bjdod N H A Nspfx Abnewn cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS vertical machining center was manufactured in 2008. It features a 1270 × 508 × 635 mm travel range, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine includes a 40 + 1 position tool changer and a high-speed machining package. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4SS machine we have for sale. Contact us for more information. • Distance spindle–table: 102 mm • Tool holder taper: CT40 (DIN 69871) • Max cutting feed: 20.5 m/min • Rapid feed (X/Y/Z): 35.6 m/min • Tool changer type: Random vertical • Tool magazine capacity: 40 + 1 positions • Data interface: USB • Options/Features: • Through-spindle coolant system (21 bar) • 4th axis drive and wiring (prepared for 4th axis) • Intuitive programming system • Dual spindle orientation • Coordinate rotation system • Macro variables and scaling functions • High-speed machining package Bwedpfxox D Irmj Abnon Additional equipment • Screw-type chip conveyor • Auxiliary high-pressure filtration system