Printing machine Bürkle SDLR 1300, Druma

Bürkle SDLR 1300

Condition: used, Year of construction: 2008, For sale, we offer an MTU combined heat and power (CHP) plant with 1.2 MW electrical output. Technical details: Manufacturer: MTU Engine: MTU 12V4000L62 Generator: Stamford Year of manufacture: 2008 (completely overhauled in 2015) Operating hours: 63,000 Including control cabinets Including dry cooler Godpfx Afjxcwlajnein

Condition: ready for operation (used), Year of construction: 2018, operating hours: 60,000 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, power: 3,028 kW (4,116.93 HP), empty load weight: 10,000 kg, fuel: domestic gas H, control cabinet height: 2,000 mm, control cabinet length: 600 mm, control cabinet width: 800 mm, nominal power: 2,679 kW (3,642.42 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, GE Jenbacher JMS 616 GS-N.L Gas CHP Unit Fuel Type: Natural Gas Electrical Output: 3,065 kW Thermal Output: 2,420 kW Total Efficiency: 85.6% Electrical Efficiency: 42.9% Thermal Efficiency: 42.7% Voltage: 690 V Frequency: 50 Hz RPM: 1,500 Engine Configuration: V16 (60° angle) Bore x Stroke: 190 mm × 220 mm Displacement: 99.8 L Fuel Consumption: Approx. 597 Nm³/h (at LHV 9.5 kWh/Nm³) Giodpjwptfrjfx Afnsn Noise Level: 101 dB(A) at 1 metre Dry Engine Weight: approx. 10,000 kg Dimensions (L×W×H): 8,300 × 2,200 × 2,800 mm ⚙️ Included Equipment Turbocharged engine with intercooler STAMFORD LVSI 804 W alternator (rated 3,555 kVA) LEANOX control system Electronic ignition system Full lubrication system (pump +filters) Heat exchangers for coolant and oil Control panel with visual interface Pre-heating system Gas train according to DIN-DVGW standards

Condition: new, Year of construction: 2025, functionality: fully functional, grinding width: 1,300 mm, grinding height: 160 mm, height adjustment type: electric, grinding belt length: 2,150 mm, Heesemann JSM 1350 RC Surface grinding machine Built in 2025, new machine, currently the only exhibition machine in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Continuous feed: 3 - 12 m/min - Sanding units with separate motors and continuously variable sanding belt speeds up to 18 m/s - Table extensions at the infeed and outfeed - 15.6" industrial PC - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Diameter: 160 mm Gisdpfswcqr Asx Afnsn - Longitudinal sanding unit Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Front calibration deflection roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System EMS - Doors with glass inserts - LED lighting inside the machine - Vacuum table with preparation (drilled holes) for connecting the vacuum blower - Vacuum blower (inside the machine) - Workpiece cleaning with oscillating blower tube - CSD (magnetic pressure bar) The machine is connected and can be inspected on-site by appointment. Please do not hesitate to contact us if you have any questions.

Year of construction: 2024, condition: used, General information Field of application: Grounds care Serial number: LCELV1ZD0R6000133 Technical information Power: 52 kW (71 HP) Type of fuel: Petrol Weights Empty weight: 870 kg Carrying capacity: 1.550 kg GVW: 2.420 kg Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Godpfx Aetzixpefnein Tyre brand: - Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 3.77x1.62x1.85 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2001, - Manufacturer Barberan - Type BRB-1400 - year of construction 2001 - Working width 1330 mm - Working height ~ 880 - 900 mm - Part height ~ 5 - 100 mm - Operating side right - Lacquer application roller ~45 Shore - Roller diameter 245 mm - Application cylinder speed 4 - 24 m/min - Quick-change system Application roller - Hard chrome-plated metering roller 174 mm Giedpfx Aeuyky Tsfnjn - Dosing roller Speed 4 - 24 m/min - Reverse drive - Solvent-resistant conveyor belt - Double diaphragm pump - Travelling on flanged rollers without - Feed adjustable via frequency converter 5 - 25 m/min - Length: 980mm - Width: 2.800mm - Weight 1,680 kg - Volt, Hz 400 / 50 - Location, in stock - Machine has been overhauled in 2022

Condition: used, Year of construction: 2015, operating hours: 82,000 h, functionality: fully functional, type of input current: AC, power: 220 kW (299.12 HP), input voltage: 400 V, rotational speed (min.): 1,500 rpm, empty load weight: 12,500 kg, For sale: Biogas CHP unit (BHKW) Fully functional CHP unit in container (dimensions: LxWxH = 7x3x3 meters, excluding the rooftop fan, weight: 12.5 tons) The unit will be decommissioned once the two new CHP units are operational, approximately summer 2026. The CHP was operated under a service contract with IWK. The last major overhaul (turbo, pistons, liners, heads, catalyst) was carried out in May 2025 at 77,500 operating hours. Service is performed every 2,000 hours. The unit can be inspected on site and in operation. Gisdpfsx A A Sfsx Afnen The CHP is sold as-is, without warranty, ex location. Transport costs to be borne by the buyer.

Year of construction: 2024, condition: new, Return System Godpfx Asw Nadmjfnein The RTS Compact is a standalone system that can be connected to any KAM, regardless of the manufacturer. The throughput speed is continuously adjusted to the speed of the KAM. The RTS Compact is supplied complete with a control cabinet and is ready for operation immediately after installation. Optionally available with the "RTS Compact Conveyor System Extension" for easy rotation of parts during cross-edging. Optionally available with the "RTS Compact Ergonomics Package." A lifting table and an air cushion table are installed at the end of the return conveyor. This option enables ergonomic working. Connection to KAMs of all manufacturers One-person operation of the KAM possible Maximum ergonomics Savings in personnel costs Material-friendly transport Installation time: approx. 0.5 days Rotating device for small parts with conveyor belt L 4500 W 800 Single-track roller track RTS Compact control system with optional control box Availability: Short-term Storage location: Flörsheim

Condition: new, Year of construction: 2024, functionality: fully functional, fuel type: diesel, color: white, power: 550 kW (747.79 HP), output voltage: 690 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 550 kW (747.79 HP), motor manufacturer: Caterpillar, type of cooling: water, 3x Lloyds Approved marine generator sets, brand new. All required Lloyds documentation available for class registration. Cat C32 generatorset / 550eKW / 690 Volt / IMO II Gisdpfxox Ec D To Afnjn

Condition: excellent (used), Year of construction: 1997, total length: 4,400 mm, working width: 1,400 mm, height adjustment type: electric, input frequency: 50 Hz, input voltage: 400 V, Good day, We present for sale Heesemann LSM 8 wide-belt grinding machine in a system of four grinding units: transverse unit / longitudinal unit with calibration roller / longitudinal unit with reverser / longitudinal unit + dust collection brush. Machine after mechanical overhaul and inspection, checked and set up, ready to work. Year of construction: 1997 Feed speed: 5-25 m/min - infinitely adjustable from the control panel Working height: 880 mm Workpieces machined: 3-80 mm Energy demand: 107 kW - at full load Total weight: 10250 kg Control: control panel with physical buttons and display Controls: and side of abrasive belt change: right Single conveyor belts, perforated, perforated table with channel and vakuum fan - for safe transport of short workpieces. Godpfxsu Hlzfs Afnoin Part pressure: rubberized rollers fi 70 mm. Abrasive belt Q aggregate: 5400 mm x 150 mm Motor power: 13/17 kW - two-speed motor - belt speed: 12 m/s / 24 m/s Belt "sergeant": 4850 mm x 141 mm Longitudinal belts L aggregate: 2620 mm x 1450 mm Motor power: 16.5 kW / 21 kW - two-speed motors - 10 m/s / 20 m/s Pressing: Pressure beams with computer-controlled selective pressure control - CSD® system with infinitely variable pressure adjustment of individual pressure elements for trouble-free multi-row loading. Reading control roller distance: 16 mm. The abrasive belts have a cleaning system - blow-off and dust extraction. Workpiece tolerance compensation to a maximum of 2 mm by maintenance-free pressure electromagnets. Working width, as well as the beginning and end of the grinding of the pressure bar electronically controlled. Cleaning of the abrasive belts by means of blow-off tubes, dust extraction by means of integrated exhaust channels, activation of the blow-offs automatic, upon detection of workpieces in the machine. At the end, a cleaning/deblasting brush fi 150 mm with an exhaust duct for dust removal. Additional blow-off rotors at the exit of the machine with an exhaust channel. Commissioning at the new site and initial training in operation - to be agreed. Price negotiable on request, machine available immediately.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, working width: 1,300 mm, Equipped with: 1 transversal belt with CNC-controlled CSD magnetic pads, 1 longitudinal belt with 1 retractable descending roller + CNC-controlled CSD pad, 1 cleaning brush. Gijdowy Npuspfx Afnon