Deloading Systems

Baumann BA 7

Condition: used, Year of construction: 1988, BOBST Printing Machine with 4 bottom colors anilox cilinders 120l/cm and 80l/cm TRANSFER BOBST FLATBED DIE CUTTER BOBST AUTOPLATINE SPO 1600, max format 1100 mm x 1600 mm / 43.3" x 63" with 4 Bottom Printing unit and transfer Bobst * Vacuum feeder * Die cutting section * Waste elimination section * Centerline II * High pile delivery with two lifting tables * Max sheet format: 1100 mm x 1600 mm / 43.3" x 63" * Min sheet format: 520mm x 600mm / 20.5" x 23.6" * Cutting force: 400 t * Materials: E, B, C, CB, BE flutes * Max speed: 6,000 sheets/hour Hjdpfov Ifpuox Ab Uek Possibility to sell them separately

Year of construction: 2006, condition: good (used), Agfa chiller (cooling system) for Agfa and screen CTP systems. Inspected and tested. Hjdpjdtr A Tjfx Ab Usk

Condition: good (used), Wohlenberg 132 TS ASE Paper guillotine Machine in perfect condition, ready for production. Year of manufacture 2015. Available immediately from stock. Equipped with the ASE automatic trim removal system. The guillotine can be used as a stand-alone unit or integrated with cutting systems. Program generation takes place in the menu and includes a variety of cutting tasks, e.g. Single cut, Programming, Multiple cut, Non-cutting pressure, Automatic actual value transfer. Wohlenberg premium cutting machines are manufactured in Solms, Germany. Distinguishing features of the Wohlenberg machine: Hjdpowt Sq Uefx Ab Uok – Interactive user interface – 18.4” touch screen – MIS integration (optional) – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via electronic handwheel – Optimized cutting cycle – Programmable hold-down pressure – Automatic adjustment of the hold-down pressure to the cutting width – Automated knife change from the front – Quick knife change – New machine body cast in one piece = higher stability – Maintenance-free electromagnetic clutch Technical data: Cutting length: 1320 mm Maximum stack height: 165 mm Infeed depth: 1325 mm Smallest cut with sheet metal under the pressure beam: 77 mm Smallest cut without sheet metal under the pressure beam: 20 mm Maximum saddle feed speed: 300 mm/s Maximum mechanical efficiency of the knife: 44 cycles/min Saddle guidance: above the work table Main engine power: 4.5kW Net weight: 3410 kg The machine is equipped with a spare knife, sticks, a pressure plate, documentation, tools, and a conveyor belt.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, overall weight: 52,000 kg, punching force: 600 t, space requirement height: 3,520 mm, space requirement length: 12,150 mm, space requirement width: 9,340 mm, Machine for punching, embossing, waste stripping and blanking Used machine, overhauled at the QTM Schwalmtal plant System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic punching, creasing and embossing with or without gripper edge ⦁ for stripping the inner waste as well as the side and rear sheet edges ⦁ for stacking the punched and stripped sheets with the attached gripper edges or the attached gripper edges or ⦁ for cutting off the gripper edges and then depositing the remaining sheets in stacks remaining sheets ⦁ with a patented gripper carriage register system for maximum register accuracy ⦁ with a bundle stacking machine that features a fully automatic separating sheet feeder and NON-STOP delivery and does not need to be converted even for the smallest blanks. changeover even the smallest cuts. (Shuttle table with comb structure) ⦁ Cut-off sheet magazine with electrical stock control, during production refillable during production ⦁ with Centerline equipment ⦁ with automatic pallet changing device in the storage area ⦁ Modem ⦁ Standard elevation of the machine 600 mm Specification Sheet format max. 1060 x 1450 mm Sheet format min. 500 x 700 mm Maximum punching force 6.0 MN (600t) Speed 8,000 Bg / h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/ Corrugated cardboard up to 5 mm Hjdpst E Nthjfx Ab Ujk (max. sheet curvature 4 %) Features: patented QTM rail system manual non-stop feeder stripping station depaneling station Centerline Fully automatic pallet changing device Deposit incl. platform Upgrade of the control system to Siemens S7 Completely overhauled machine drive Quick-clamping frame in all tool stations

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Hedog Ezaropfx Ab Usk Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 0 278 06 1192, film width: 700 mm, roll diameter: 700 mm, Used Friz rotary cutter. 1 set of blades has been resharpened. Hjdpfxev Radxe Ab Uek The machine is used and is sold without warranty. Inspection is possible and welcome. Loading facilities available.

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. Hodpoiklxbjfx Ab Uek The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Feel free to contact us.

Condition: new, volume flow: 0.984 m³/h, Atlas Copco G7FF 500 lt screw compressor NEW Specification: • condition - new • manufacturer - Atlas Copco • capacity - 984 l/min • main engine power - 7.5 kW • tank - 500 l • maximum operating pressure - 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) • meets CE standards • user manual in Polish • weight - 227 kg Additional information: • possibility of obtaining a manufacturer's warranty after start-up by an authorized Atlas Copco service • available within 7 working days Hsdpfx Abehkttpe Uok

Year of construction: 2009, condition: ready for operation (used), A flexographic printing, slitting, die-cutting and gluing system with bundle ejector (Flexo Foldergluer) for corrugated board production and processing DY Machinery is available. Processes: Feeding, printing, creasing, slitting, die-cutting, folding, gluing, bundle ejection. Production speed: 220 sheets/min, max. sheet guide X/Y: 1200mm/2750mm, max. printing area X/Y: 1170mm/2700mm, min. sheet dimensions X/Y: 320mm/600mm, total system weight: approx. 42t. 1) Belt feeder with vacuum, dust separator, speed indicator and alignment device. 2) Top-side flexo printing with draw roller transfer, ink stop sensors and automatic cleaning. 3) Creasing and slitting unit with trimming and glue flap knife, slitting knife thickness: 8mm. 4) Rotary punch with polyurethane anvil and soft punching system, punching dimensions: +/-25mm. 5) Downward folding and gluing unit based on VALCO VC 350 AG system. 6) Top stacker with bundle retention system for bundle ejection. 7) Central control system ACCS-2000 with an order storage capacity of 100,000. The entire system has a remote control system for the flexo units, folding and gluing unit and bundle ejector. Documentation available. On-site inspection is possible. Expected to be available from October 2025. Hedpfx Aju S I D Reb Uok

Year of construction: 1999, condition: used, machine/vehicle number: 6572818, Jogger Serial Number: 6572818 Hedpeg Stklefx Ab Ujk 800 x 1340 mm