TEST. SPECIAL 6 CHUCKS CONNECTION 3 LINEAR OUTPUTS PAS 57

BIESSE

Condition: used, Year of construction: 2013, power: 17.1 kW (23.25 HP), number of axes: 4, working width: 1,320 mm, milling spindle speed (max.): 24,000 rpm, working length: 2,500 mm, TECHNICAL DETAILS Working area, X-axis: 2,500 mm Working area, Y-axis: 1,320 mm Travel, Y-axis: 1,900 mm Max. panel thickness: 170 mm Work table: Cantilever and rail table Number of controlled axes: 4 Travel speed, X-axis: 80 m/min Travel speed, Y-axis: 80 m/min Travel speed, Z-axis: 20 m/min Drilling unit Number of drilling units: 1 Position of drilling unit: top Vertical drilling spindles: 10 Horizontal drilling spindles, X-direction: 4 Horizontal drilling spindles, Y-direction: 2 Total number of drilling spindles: 16 Milling spindle Number of milling spindles: 1 Position of milling spindle: top Controlled axes: 4 Automatic tool changer: yes Motor power: 13 kW Speed: 24,000 rpm Grooving unit Number of grooving units: 1 Position of grooving unit: top Design: fixed, for grooving in the X-direction Max. tool diameter: 120 mm Dcsdszmtlkepfx Akhsk Motor power: 1.7 kW Speed: 7,500 rpm Number of tool magazines: 2 Tool magazine, rear: 12 slots Tool magazine, side: 10 slots Total number of tool change slots: 22 MACHINE DETAILS Machine programming software: BiesseWorks Number of vacuum pumps: 1 Suction capacity per pump: 90 m³/h Total connected load: 17.1 kW EQUIPMENT CE marking Protective structure for machining units with safety sensors Safety system: front safety mats 4 consoles with suction cups for workpiece clamping 1 drilling unit, top 1 milling spindle, top 1 fixed grooving unit, top, for grooves in the X-direction 1 rear tool magazine with 12 slots 1 side tool magazine with 10 slots 1 vacuum pump Front safety mats The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8359

Condition: like new (used), Year of construction: 2021, machine/vehicle number: 1000042824, We are offering for sale a very well-maintained Biesse BREMA EKO 2.2 machine from 2021. The machine includes tool changing, two drilling units, and a set of tools. Dcjdpfezcrfpox Akhek Software: bSolid. The machine has been serviced by our technician, so we are very familiar with its condition and history. The machine can be tested at our showroom in Brno.

Condition: used, Pressure gauge BIESSE 2424A0007. Dcsdpfozrxnnsx Akhjk

Condition: used, machine/vehicle number: 008563, X axis working area: 3000 mm Dedpfx Aezruxvekhock Y axis working area: 1300 mm Total number of drilling spindles: 82

Condition: ready for operation (used), Year of construction: 2018, operating hours: 4,832 h, Edgebander manufactured in 2018. This BIESSE JADE 340 features a Biesse HD touchscreen control unit and operates at a feed rate of up to 12 m/min. It accommodates panel thicknesses from 10 to 60 mm and edge thicknesses from 0.4 to 8 mm. If you are looking to get high-quality edge banding capabilities, consider the BIESSE JADE 340 machine we have for sale. Contact us for further details. Dedpfx Akozrf R Nohsck • Year: 2018 (10/2018, per nameplate) • CE • Axes: not applicable • Key parameters: panel thickness 10–60 mm • Key parameters: edge height 14–64 mm • Key parameters: edge thickness 0.4–8 mm • Documents: Nameplate & usage-counter photos on page 2 • Equipment / Units included: Pre-milling unit • Equipment / Units included: Glue unit + end-cutting (trim) unit • Equipment / Units included: Corner rounding unit • Equipment / Units included: Additional interchangeable glue pot • Equipment / Units included: Radius scraper + glue-joint scraper • Equipment / Units included: Polishing / buffing units • Equipment / Units included: Front & rear anti-adhesive spray units • Condition: Very good condition, in daily production use until sale (per seller's statement) • Usage counter: 526,175 panels processed • Usage counter: 351,289 running metres processed (meter reading 14/05/2026) • Consistent with regular single-shift production

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine includes a vacuum system, a conveyor belt for chip removal, and a liquid cooling unit. If you are looking to get high-quality CNC machining capabilities, consider the Biesse Rover C9.50 machine we have for sale. Contact us for more information. Worktable and clamping • 8 ATS plate holders (L = 1525 mm) and 24 slide rails • Automatic positioning of plate holders and slide rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), with pneumatic system • 4 removable center stops, stroke 140 mm (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules)Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum systemMachining units and configuration • Composition C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a work unit with 5 interpolating axes (units usable only when the electric spindle is vertical) • Composition C3-P2: • Additional Z slide for rear work units, controlled by an independent Z axis • 16 vertical and 4 horizontal boring spindles in Y-direction Dcsdsztf Nuepfx Akhjk • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle)Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • additional refurbished 5-axe main spindel available • Conveyor belt for removing chips and scrap pieces (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles, or one electric spindle plus one liquid-cooled drilling head)Note: The technical data and descriptions are taken from the original order confirmation and are for information only; they are not binding.

Condition: used, machine/vehicle number: 008605, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Dodozqz Riepfx Akheck Max feed speed: 40 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 008606, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 5 Dsdpfx Aszqz Rcjkheck No of Top Units: 2 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008607, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 6 No of Top Units: 4 Lateral horizontal groups: yes Djdpfx Aszqz N Eekhjck

Condition: used, machine/vehicle number: 008694, X axis working area: 4320 mm Y axis working area: 1287 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Dodpfxezqz Nxs Akheck Number of controlled axes: 5 axes Total number of drilling spindles: 16 Total number of tool changer positions: 31