5 Axis CNC Routers

BIESSE ROVER A 1643

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Biesse Type: Rover A 1643 Year of manufacture: 2016 Technical data - 5-axis machine - Working area X/Y: approx. 4320 - 1620 mm Main spindle - Rated current: 14 kW - Power, short-term: 16 kW (S2 1 min.) - Maximum speed: 20,000 rpm - Tool clamping system: HSK-F63 - Cooling: as liquid - Operating mode: S1 continuous operation Drilling unit - Maximum motor speed: 6000 rpm - Vertical spindle stroke: 60 mm - Horizontal spindle stroke: 75 mm Tsdpfj Ad Iw Hox Afgjd - Spindle bore: 10 mm - Saw blade diameter: 80 - 120 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Tjdpfx Ajy Ehrxjfgjd Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Work area X: 4320 mm Work area Y: 1500 mm Tode Agnckepfx Afgjd Z-axis workpiece clearance: 180 mm 13 kW, 5-axis electro-spindle, HSK F63 connection Vertical drilling heads: 20 Horizontal drilling heads X: 2 Horizontal drilling heads Y: 2 2 blades for grooving in X and Y directions 16-position revolving tool changer Work table with 8 stops NC-Hops 6.0 5-axis machine license, 1 × NC-Hops for office use, 1 × aCADemy 250 m3/h vacuum pump Chip conveyor belt Safety mats Protective screens Approximate weight: 3950 kg 3695 hours of 5-axis spindle operation and 2027 hours of drilling operation.

Condition: used, Year of construction: 2019, functionality: fully functional, This Biesse machine must be sold by the end of the year – a great opportunity to invest in 5-axis technology at an extremely attractive price! Many accessories are already included: tools, frame clamps, vacuum suction cups, and other equipment. Come and inspect the machine and request your personal quote; you can find more information on our website gsbern.swiss. Tedpfxo Afaape Afged Best regards, Renato and Joël GSBern – Consultants for Woodworkers

Condition: used, Year of construction: 2022, - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t Panel dividing saw Manufacturer: Biesse Type: Selco WNT 630 Year of manufacture: 2022 Technical data - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm Todezuyl Tepfx Afgjd - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t The machine is almost new and has only been used for a few months. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails Todpfx Aozuwyzefged 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: SCM Type: Olimpic K360 T-ER1 Year of manufacture: 2017 Technical data - Feed speed: 11 m/min - Edge thickness: 0.4 - 6 mm - Control: SCM control panel with display - Board thickness: 8 - 60 mm - Power supply: 400 V / 3~ / 50 Hz, 23 A - Min. workpiece: 140 x 90 mm Units Pre-milling - 2 counter-rotating diamond heads (up to 3 mm removal) EVA gluing unit Pressure zone with driven roller + 2 pressure rollers End trimming unit K-2 (straight / beveled, automatic switching) Flush trimming - flush, radius, chamfer Tedpfozuyk Njx Afged Corner rounding R1/R2 Profile + surface scraper blade Polishing unit Anti-adhesive liquid system (2 liquids), edge roller feed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 006054, X axis working area: 5300 mm Y axis working area: 1300 mm Working Table: Pod and Rail Main Electrospindle power: 9 KW Tedpfx Afewcx T Uogjd Number of controlled axes: 5 axes Total number of drilling spindles: 32 Total number of tool changer positions: 8

Condition: good (used), Year of construction: 2018, machine/vehicle number: 1000028154, functionality: fully functional, Equipment: rotational speed infinitely variable, The machine was commissioned in 2019, single owner. It has seen very little use. Description Useful working area, 5-axis configuration: X=3280mm, Y=1600mm Axis travel: X=3706mm, Y=2294mm, Z1=515mm, Z2=371mm Axis traverse speed: X=80m/min, Y=60m/min, Z=30m/min Electrospindle: HSD, 5 axes 11 kW, with continuous 360° rotation on B and C axes, enabling high-precision machining of complex shapes liquid-cooled Drilling head: HSD 20 vertical spindles 4 horizontal spindles grooving discs on X-axis grooving discs on Y-axis Work table: 6 cross beams Tsdpoxdl H Ujfx Afgjd Isbjwhypnjni Itxtobb 4 suction cups per beam preparation for uniclamp Tool magazines: 16-position revolver-type tool changer Vacuum system: Vacuum pump with a capacity of 250 m³/h, ensuring firm clamping of the parts during processing

Condition: excellent (used), Working area X: 5,920 mm Working area Y: 1,287 mm Working area Z: 170 mm C, A axes: available Swivel machining: 2 working areas for swivel machining Work table: ATS-HTS-EPS Automatic console positioning system EPS 10 automatically positionable consoles 2 locating pins per console 5-axis milling spindle: Power: 9 kW / 11 kW at 60 Hz Speed: up to 24,000 rpm Tedpfozxbhwex Afgsd Tool holder: HSK-F63 Liquid-cooled Drilling head BH 26 16 vertical drilling spindles 4 horizontal drilling spindles in the X direction 2 grooving units for grooves in the X and Y directions Vertical drilling spindles 16, Horizontal drilling spindle X = Tool changer: Chain tool changer with 21 tool positions Clamping systems: Uniclamp clamping system - 6 pieces Control system: BIESSE XP 600 Chip removal: Motorized conveyor belts for the removal of chips and machining waste Vacuum pump BECKER: Motor power 5.5 kW Conveying capacity: 244/286 m³/h Additional equipment: Numerous vacuum suction cups; 6 UNICLAMP clamping systems; Numerous HSK 63 tool holders; 2 large saw blades in the tool magazine Compressed air: 7-7.5 bar Total power: 25.3 kW Weight: 4200 kg