Chiller

Bitzer CSH 8571-110Y (X2)

Condition: good (used), Equipment: bathroom, shower, Used container system, dry, watertight, in good condition. The system has already been disassembled and is ready for collection. Manufacturer: BICOBA Year of manufacture: 2009 - Consisting of 10 x 20ft containers with toilet and shower - Container area = approx. 150m² - Layout see sketch Dimensions per container: Length: 6.00m Width: 2.45m External height: 2.90m Internal height: 2.50m Equipment: - Plastic windows with insulated glazing and tilt/turn function - Blinds Fedpfx Amoz Rmtbo Eegi - PVC flooring (must be machine cleaned) - Water heater was connected to the building - Wall panelling - Ceiling panelling - Container lockers - Awnings on the front and side - Weather protection sheets for the roof - 3 showers - 3 sinks - 2 toilets with cabin system - 2 urinals - Documents available Insulation: Wall: 100mm Floor: 100mm Roof: 100mm - Signs of wear on the flooring Loading and transport can be arranged. Only serious and legitimate inquiries will be answered, including the following information: name, email address, and telephone number.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), overall weight: 4,500 kg, Equipment: compressor, freezer, Refrigeration machine with 2x dry coolers Fgodpsrzq Arofx Am Eei Cooling capacity: max 800 kW Number of cooling circuits: 2 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 2 Trane CHHP0N2TKG0N134A semi-hermetic screw compressors, shell and tube as evaporator, 2x oil separators, Guentner GBV 200 Evaporator TRANE EG 340 evaporator water concentration 560 liters Control cabinet 1x air-cooled condenser machine weight: 4500kg With dry coolers 1x Güntner GWH 090.1D/5-M PT: 30.8 bar PS: 28 bar The specified cooling capacity is at a water outlet of +7°C at a condensing temperature of +40°C.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), type of cooling: air, Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Fgjdpfsvllxdox Am Esi Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Year of construction: 2018, condition: good (used), Multivac L310 Conveyor Belt Labeller Fedpfx Amoyffnps Ejgi The conveyor belt labellers of the L 310 series offer the highest level of flexibility and precision in the labelling of a wide range of packs, such as pots, cans, folding cartons, tubular pouches, thermoformed packs or trays. They have a modular design and, thanks to a wide range of options for labelling, printing and inspection, they can be precisely adapted to even the most complex tasks. With a transport conveyor speed of up to 90 m/min and a labelling speed of up to 120 m/min, they can also meet the highest output requirements. The L 310 conveyor belt labeller is also available in a hygienic design for use in particularly hygiene-sensitive areas, such as Lifescience and healthcare products. Benefits:  Wide range of options available to perform a variety of tasks, including printing and inspection Maximum labelling speed and accuracy through the use of servo technology Easy operation thanks to the graphic HMI 2.0 or MC 08/MC 10 user interface Reduced downtime thanks to simple and fast label roll changes Transport belt changes without tools Consistent hygiene design Manufacturer:Multivac Model: L 310 Year:2018 Capacity:Up to 120 packs/min. Labelling Width:Up to 500 mm Labelling:Bottom and Top Belt Width:290 mm Machine Dimensions LxWxH:1.750x1.050x1.900 mm Machine Weight:200 kg.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS Fgsdpeud H Dmjfx Am Eji  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: not inspected (used), Various chillers and condensers/liquefiers from bottling plant, dismantled, for sale, among others: Fodpfx Amsh Nq E Sj Eegi 10 cooling plants, make Hafner + Muschler, complete on frames, each with 2 compressors, incl. electrical- and control cabinet, refrigerant R134a, power consumption: 150 kW / 198 kW / 238 kW, years of construction 2002 - 2008, dimensions each approx. 3,100mm x 1,600mm 3 condensers/liquefiers, make Thermofin, each with 4 fans, years of construction 2006/2008/2016, dimensions each: 4,200mm x 2,300mm 4 condensers/liquefiers, make Güntner, each with 8 fans with 890 rpm, 246.7 lt volume, 32 bar, year 2002/2016, dimensions: 6,150mm x 2,300mm 2 condensers/liquefiers, make Güntner, each with 6 fans, 93 lt. content, 28 bar, year 2002, dimensions: 6,050mm x 2,400mm

Condition: used, GRUNDFOS vertical multistage high-pressure centrifugal pump Pump in like-new condition, but a part of the magnetic coupling has been removed. Type CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Flow rate at 7.2 bar: max. 10 m3/h Fgjdpfxsfupado Am Eji Head: max. 91.8 meters Power supply: 400 volts, 50 Hz Power: 3 kW - Pump design with 9 stages - Made of stainless steel 1.4401 - The like-new pump was used as a source of spare parts, but several new pump chambers are included - A part of the magnetic coupling is missing Suitable for potable water supply, irrigation, and drainage Packaged in the original wooden crate Pump dimensions (L x W x H): 1100 x 250 x 300 mm Shipping crate dimensions (L x W x H): 1400 x 330 x 340 mm Weight with shipping crate: 85 kg Like new Not a submersible pump or a deep-well pump.

Condition: excellent (used), functionality: fully functional, Refrigeration Compressor Emmerson Copeland Type: OLTQ-36V-TFD Refrigeration Evaporator Helpman LEX 26230 The unit operates with refrigerant R449A Was used as a shock freezer for freezing meat pieces Helpman LEX 26 230 Specifications Manufacturer: Helpman Type: LEX 26 230 Cooling capacity: 23.4 kW Refrigerant: Freon Number of fans: 3 Fan diameter: 7 mm Defrost: Electric Air flow: 14,000 m³/h Dimensions: 2660x760x800 mm (LxWxH) Notes | Year of manufacture: 2013 / Fan: 0.22 kW / 1330 RPM / Ø = 500 mm / 17,500 m³/h Sale without warranty, guarantee, or returns, only to commercial customers Fsdpfxov Efxqs Am Ejgi

Condition: like new (used), Multi-stage, submersible, self-priming centrifugal pump Fgjdpfefz D Dnex Am Esi Type: MTR 20-19/6 A-W-A-HQQV Product No.: A45937986 Dimensions: L 150 cm, W 30 cm, H 30 cm // approx. 102 kg

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: MM1007, bale length: 880 mm, bale height: 600 mm, pressing force: 500 t, Taurus shear baler model E 556.P, year 2015, in excellent working condition and complete with documentation. This machine is ideal for baling and shearing all types of ferrous scrap: profiles, sheet metal, bulky mixed scrap, and vehicles. Technical data Shearing force: 500 tons Shearing width: approx. 950 mm Shearing height: approx. 640 mm Box length: 5,600 mm Open box width: 2,400 mm Bale size (closed): Width: 880 mm Height: 600 mm Features Soundproofed 125 HP diesel engine Operator cabin Radio remote control Complete documentation Machine ready for operation. Fgedpfx Amey Iblwe Eei