CP Bourg BB 3002 | 26mio

Bourg All other models

Condition: used, Year of construction: 2018, operating hours: 69,000,000 h, functionality: fully functional, Folder gluer machine Iodeyg Edgopfx Abgsia Folding carton with longitudinal seam: max. 1,150 × 600 mm min. 75 × 55 mm min. 45 × 55 mm (with small carton device) Crash-lock bottom carton: max. 1,150 × 600 mm min. 146 × 80 mm 4-corner box (erected): max. 1,150 × 680 mm min. 120 × 110 mm 6-corner box (erected): max. 1,150 × 630 mm min. 250 × 130 mm With BELKHOFF control system Roller and drying tunnel TÜNKERS EAS 480 delivery station, right-hand, year of manufacture 2019

Condition: used, Rotary vane vacuum pump - oil lubricated Manufacturer: Leybold Type: Sogevac SV 200 Cat. No.: 10927 Status: Refurbished Warranty: 12 months Included: Oil filling (mineral oil), operating manual with list of initial files Iodpfjcnyy Hjx Abgoia Voltage: 50/60Hz 230-400/460V Motor rating: 4 KW N. suction capacity: approx. 200 m³/h Final pressure without gas bellow: approx. 0,08 mbar Delivery time: ex stock

Year of construction: 1988, condition: good (used), machine/vehicle number: 11801, Gietz FSA 720 Foil/stamping embossing press. size 720x520 mm, minimum sheet size 297x210, Double sheet detection, pressure 120 t, max speed 5000 sheets/h, pile height 950 mm with max 700kg, pile height on delivery 700mm, dimensions of the machine 380x280x195 cm Machine no: 11801 Iedpfxewnqrge Abgjia

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: Iiedpfjwka S Iox Abgea - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: SEM126/TH46098, Automatic Carton Folder Gluer, Max open blank width: 1100 mm, Min open blank width: 126 mm, Max feed up length: 800 mm, Min feed up length: 60 mm Stock : Cartonboard up to 800 gsm, Corrugated up to E flute.Max belt speed i: 425 m/min Complete with : Bottom belt feeder, Back lifters with vibration for smooth and consistent feeding, Pre-breaking system, Small box attachment - allowing min 76mm open blank width, Crash-lock module, Bottom left hand side glue pot, Three belt carrier folding section, Heavy duty Double Trombone delivery, Compression belt section, HHS C-1100 8 B cold glue system, 4 x HHS glue guns, Remote control, Manuals and electrical diagrams. Ijdpfx Aov Ipl Tebgoia

Condition: excellent (used), Year of construction: 2001, Offer consisting of: Akebono banding machine, clean and functional condition, available for inspection in the warehouse. Iisdpfxewu R H Rs Abgea

Condition: excellent (used), Year of construction: 2015, Low-usage envelope inserting machine with the following configurations - 2 feeder stations for unfolded documents with large capacity (325 sheets) - 1 feeder station for enclosures with large capacity (300 inserts) - 1 feeder station for envelopes (DIN long, C6/5, C5 and other formats) - Daily mail function for up to 5 sheets - Capable of processing extra-long documents - Paper length: 127-406 mm - Paper width: 127-229 mm - Envelope formats: DIN long, C6/5, C5 or 88x220 to 164x242 mm - "Flip-flop function": automatic switching when a feeder tray is empty Iisdpfx Aeiyx Ixsbgja - Automatic double and misfeed detection - Automatic adjustment of fold lengths (no opening/adjustment required) - Automatic height adjustment of the address field - 4 fold types: single, letter, Z, double-parallel fold - Up to 20 programs can be stored - Large display with graphical and text display - Up to 8 sheets/envelope - Up to 3,500 cycles/h - Counter reading: 249,103 cycles

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: G366J4110658, Power: 80 A4 pages/minute in color or black and white (sheet printed on one side) Counter: Total color: 2’052’913 // Total BW: 1‘671‘481 Sheet formats: DIN A5 – A3+ => 330 x 487 mm including continuous intermediate formats Option: banner print 330 x 700 mm Max printable area: 323mm x 480mm 323mm x 692mm (with optional Banner Sheet Tray) Gramatur (gr / m2) : 52 to 360 gsm Resolution: 4800 x 1200 dpi, VCSEL-Technology Colors: 5 Equipment / Additional information: White printing / Varnish Iiodoyglynopfx Abgoa Folding / Stapling / Printing / Scanning & Copying Special banner feeder Original feeder: Capacity up to 220 originals (at 80g/m2) or less than 27mm Paper capacity: Standard 2,500 sheets from 2 paper trays Optional up to 16,200 sheets from 9 paper trays (including bypass) 5-color system: 5th color station can be supplemented with white, clear and/or neon yellow toner Incl. 10.4’ color touchscreen control panel Incl. status light Warm-up time: 300 sec.

Condition: good (used), Fastbind PUREVA XT Perfect binder Machine ready to work, after inspection. Possibility of gluing hard and soft covers and blocks. Two replaceable gluers for gluing with standard EVA (Hot melt) and PUR (Polyurethane Glue) glue The machine is equipped with the new PGO Microcut milling technology. Ideal for photo books, thick covers and to meet the requirements of difficult customers. original product – Made in Finland The set includes strips for hard and soft covers, Description: Technical capabilities of the machine: 60-180 books/h Iiodpjvkt Rxjfx Abgea Min. / max. cover thickness 0.1–45 mm Max. length of glued spine 455 mm Max. cover thickness 400 g/m² Voltage 220–240 V Machine dimensions (width/length/height) 1070 x 600 x 640 mm Weight 90 kg

Condition: used, machine/vehicle number: 006370, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 12 nr Iiodpfx Asl Txw Hjbgea