Vertical CNC Machine Centres

BREMA EKO 902 INS

Condition: good (used), Year of construction: 2002, Edge banding machine with Fuegefraesen otherwise fully equipped PU glue is suitable Bsdpfx Afogmn H Ajtjwi

Condition: excellent (used), C.N.C. WORKING CENTER with 3 axes (X-Y-Z) - Goose-neck type Movable panel (workpiece), static working head, Horizontal position of the panel (workpiece) Numerical Control with Software BiesseWorks (Separate electric and command cabinet) Safety cabin (enclosure) of the working head, Front emergency carpets In-feeding working table (panel support) No. 2 Workpieces fixing clamps (for the panels introduction in the working area) Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 90 x 70 x 8 (ca.) Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1300 x 60 (ca.) Bwsdpfxjwb Alls Aftei Total installed power (Kw) 24 BOTTOM WORKING UNITS: Independent vertical boring spindles (No.) 29 Independent horizontal boring spindles (No.) 10 (8 X + 2 Y) Circular Grooving Saw (on X axis) dia. (mm) 160 (1 x kw 3,5 ca.) Vertical electro-spindle (No.) ISO 30 (1 x kw 4,5 ca.) TOP WORKING UNITS: Indipendent vertical drilling spindles (No.) 29 Indipendent horizontal drilling spindles (No.) 10 (8 X + 2 Y) Circular Grooving Saw (on X axis) dia. (mm) 160 (1 x kw 3,5 ca.) Vertical electro-spindle (No.) ISO 30 (1 x kw 4,5 ca.)

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 25167180701, functionality: fully functional, power: 4.5 kW (6.12 HP), workpiece height (max.): 60 mm, total height: 60 mm, total width: 1,000 mm, air demand: 2,000 m³/h, feed rate Y-axis: 50 m/min, feed rate Z-axis: 20 m/min, rotational speed (min.): 4,000 rpm, CNC machining center Manufacturer: Masterwood Model: Project TF 100 2.0 Technical specifications: Axes: X-axis: Max. workpiece length: unlimited Min. workpiece length: 250 mm Travel speed: 0–25 m/min Bedpfoxz Hgdex Aftowi Y-axis: Max. workpiece width: 1,000 mm for all units Min. workpiece width: 80 mm Travel speed: 0–50 m/min Z-axis: Max. workpiece thickness: 60 mm Min. workpiece thickness: 10 mm Travel speed: 0–20 m/min The minimum and maximum workpiece sizes depend on the weight and the length-to-width ratio. Equipment/features: - Air tables in the working area - Roller support at infeed and outfeed - Panel measuring sensor - Ball screw and linear guides - Rack and pinion drive - Centralized lubrication system - Import of DXF files Milling unit: Including Masterwork software extension Spindle speed: 1,000 to 18,000 rpm Motor (frequency-controlled): 3.3 kW Includes integrated extraction control (During drilling, only the drilling head is extracted; during milling, only the milling unit is extracted) Drilling head with 16 spindles for 5-sided machining Grooving saw unit Milling unit with 6-position tool changer Includes grooving saw blade, 2 diamond milling cutters, 1 WPL finish milling cutter Provision for CLAMEX and door processing package 2 foldable roller conveyors Milling unit for Clamex connectors Milling unit designed for door processing, for machine with tool changer, complete including special tool change position in changer, angle gear for holding a lock case milling cutter, macro for lock case milling Automatic, program-controlled central lubrication Camera for monitoring

Condition: used, Year of construction: 1992, Number of spindles per row of holes: 16 Number of horizontal spindles: 5 Cup hinge drilling head: yes Drill pitch: 32 mm Hold-down device: yes / pneumatic Power consumption: 2.2 kW Drilling unit: swivelling Bjdpfxewv Nb Ne Aftswi

Condition: used, 0 0,4 - 5,0 mm Workingpiece thickness from to 10 - 50 mm Total length 4000 mm Feed speed 11 m/min. Bimatic edge bander Type Prima 7.5 Two ----- Manufacturer's description: Technical data: Edge thickness: 0.4 - 5mm min. Panel width (without rounding unit): 80 mm min. Panel width (with rounding unit): 130 mm min. Panel length (without rounding unit): 100 mm min. Panel length (with rounding unit): 300 mm min. panel thickness: 10 mm max. panel thickness: 50 mm Feed speed: 11 m/min Suction nozzle: 3 x 150 mm Connection: 9 kW - 400 V / compressed air: 6 bar Aggregates: Jointing unit incl. AIGNER diamond jointing cutterheads, with DIA- interchangeable knife system Konstantin and controlled edge blow-out nozzle behind the 2nd jointing knife head. Joining cutterhead. Cross-cut saw unit with suction device incl. 2 pneumatically swivelling saw blades saw blades, adjustable and programmable from the control panel. MULTI radius trimming unit with 4 servomotors, adjustable and programmable from the control panel. programmable from the control panel. Including DIAMANT cutter with radius 1mm and radius 2mm. Rounding unit (copy trimming unit) with insert shelf function and pneumatic 2-position turret, adjustable and programmable from the control panel. The The complete unit can be pneumatically inserted and removed from the control panel. Including 1 quick-change motor with R=1mm and 1 quick-change motor with Bwjdowgwl Depfx Aftji R=2mm MULTI radius scraper unit radius 1mm and radius 2mm with pneumatic 4-position turret. position turret. The unit can also be inserted and removed pneumatically Including suction device with chip collection box for scraper chips. Flat scraper unit with 4-fold usable scraper knives. The complete The complete unit can be inserted and removed pneumatically. Remaining glue is are sucked off. Buffing unit with 2 diagonally arranged ORIGINAL Riepe cloth-sisal wheels for cleaning and buffing. lamellar wheels for cleaning and polishing General equipment: - 90° insertion aid - Telescopic extension with double support - Motorised adjustable infeed ruler (joint thickness adjustment) from the control panel adjustable and programmable - Motorised adjustable top pressure bar adjustable and programmable from the control panel programmable - Motorised adjustable pressure zone adjustable and programmable from the control panel programmable - 5 mm version: Quick-change motors with insert-flush milling cutter interchangeable with milling motors with radius milling cutter - High-gloss package: Roller scanning for radius milling unit, radius scraper unit and flat scraper unit scraper unit and flat scraper unit - Large viewing, noise and protection cabin for all units and for the glue pot - Interior lighting - Control panel with 15'' touchscreen and self-explanatory operator guidance - USB port for data backup and data transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue tray with quick-change system and energy-saving mode in standby mode in standby - Glue roller with screw conveyor for long and high workpieces (especially for PUR glue) - Additional quick-change glue tray - Pressure zone with 3 pressure rollers, whereby the 1st pressure roller is motorised is motorised - Heavy roller snipping shears for edges 54 x 3 mm - Original RIE...

Year of construction: 2010, condition: good (used), CNC BIESSE BREMA EKO 902 INSERTS FOR SALE TECHNICAL DETAILS: 3-AXIS C.N.C. MACHINING CENTRE (X-Y-Z) - Integral protection of the operating spindle and the working area on the machine. - Numerical control (control) with BIESSE Works software on Windows. - Vertical positioning of the panels, with N. 2 panel locking clamps. - Panel feed (in X-axis direction, on the lower support with rubber wheels), movement (in X-axis) of the panel/board clamps. DIMENSIONS OF THE PALLETS (WORKING DIMENSIONS): - Length Min mm 160 / Max mm 3200 - Width Min mm 35 / Max mm 900 - Wait Min mm 8 / Max mm 80 WORKING GROUPS: - No. 1 Spindle (electro-spindle) vertical ER32 (KW 4,5) with reversing (up to 18000 RPM). Bedpshknbrsfx Aftowi - No. 1 Circular saw (for grooves) diameter mm 120 (fixed X axis) - No. 13 Independent vertical spindles for drilling (6 in X-axis + 7 in Y-axis) - Nº 8 Independent horizontal spindles for drilling (3+3 on X axis and 1+1 on Y axis) - Nº 1 Hinge drilling head unit - Total installed power 20 KW AUTOMATIC DOWEL INSERTION GROUP ON BOTH SIDES WITH PRESSURE PUMP TO APPLY THE GLUE.

Condition: new, Year of construction: 2021, functionality: fully functional, Edgebanding machine Hebrock K36 featuring PLC control, a maintenance-free and coated quick-heating glue pot, including pre-setup for rapid glue pot changeover. - 10" touchscreen interface - Maximum edge thickness: 3 mm - Minimum workpiece length: 200 mm - Minimum workpiece width: 80 mm - Feed speed: 10 m/min - Ready for operation in approx. 5 min - Maximum power consumption: 14 kW - Electrical requirements: 400V / 3-phase / 50 Hz - Machine dimensions (LxWxH): 5250 x 1230 x 1430 mm - Approximate weight: 1700 kg Additional Equipment/Options: • Whispercut pre-milling cutter, 60 mm workpiece height • Heatable infeed fence • Radius unit for corner rounding, R = 2 mm • Quick-change device for corner rounding motor • Multi-radius scraper (R2/R1) • Corner rounding for 60 mm workpiece height • Release agent spray unit • Cleaning agent spray unit • Edge protection spray system • Nesting package • Pneumatic 3-point adjustment • Multi-tool (R2/R1/chamfer) • Interior LED lighting • Equipment for short parts processing Bsdpowyu E Usfx Aftewi • Preparation for return system (barbaric) • Axis package: motorized adjustment of height, edging, and pre-milling units • Additional workpiece infeed and outfeed supports (each 450 mm)

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Bwodpoxy Tmnofx Aftoi

Condition: new, Year of construction: 2026, PREMIUM VERSION MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM RESOLUTION PRECISION, WORKING IN FULL INTERPOLATION IN EACH X, Y, Z AXIS. High-class CNC milling machine designed for the subtractive processing of materials, due to the whole range of configurations, it is used in many industries: industrial, electronics, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with user-friendly CNC control systems. The price quoted is for the machine itself, excluding additional equipment, installation, transport and training. Design Welded steel rigid construction, The gate arms are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Work table The work table is made using hybrid technology, It has T-slots enabling manual clamping of material with dimensions of 2010 x 3010mm, Dissection table with four independent vacuum sections. Drive SERVO motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions, The X and Y axes are equipped with high-quality toothed bars, praised by users, which ensure high durability and precision, The Z axis is driven by a high quality ball screw. All axles move on rail guides. The machine is equipped with a tool height sensor, Linear bearings: trapezoidal rails, Hiwin carriages. Spindle The spindle design uses high-quality machine bearings, which are characterized by very quiet operation and guarantee increased durability. Tool height measurement sensor - included. The spindle speed range is from 4,500 to 18,000 rpm. Tool clamping using ER32 collets Software OPTIONALLY The latest UCanCAM V12 software in Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software enables quick and easy design of elements, which the program then converts to so-called G-code. It is also possible to import ready files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a failure or power outage, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing - digital signal processing. The machine's DSP controller has its own processor and RAM, which ensures failure-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to operate without having to load the program each time. We offer machine tools with real CE EU DTR - certified by the best in the EU. Technical parameters Spindle 5.5kW / 18000rpm inverter, air cooled Work area 2150x3200mm Maximum spindle height 350mm Control DSP Program resolution 0.001mm Software UCanCAM V12 in Polish language version(optional) Power supply 400V Bjdeiz S Haopfx Aftowi Libra 1450 kg Machine dimensions 2680x3600x2200mm Table height 715mm Vacuum pump 7.5 kW (optional) Underpressure 440 mbar Guides linear Drivetrain toothed rack (Z axis - ball screw) Axle drives hybrid servo drives

Condition: used, machine/vehicle number: 008161, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Bodpfsx A Tlcjx Aftewi Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 6 nr