PX130 PTO-driven wood chipper

Brugger PX130

Condition: used, Year of construction: 2020, machine/vehicle number: T57F0019080055255, fuel type: diesel, power: 65 kW (88.38 HP), motor manufacturer: -, Field of application: Construction Empty weight: 83 kg Generator capacity: 8 kVA Transport dimensions (LxWxH): 0.68x0.55x0.55 Please contact PFEIFER GROUP for more information Gjdpfx Aotr Ivwofnobh

Condition: refurbished (used), Complete Cutting Machine Group from LINCK: 1.Pre-cut feed table Linck EV20 (condition:good) 2.Chipper canter LinckV18 (condition: good) 5.Boad separator unit Linck SE (condition: refurbished) 1. EV20- Pre-cut feed table Linck EV20 for smaller logs. Hydraulic unit is included. 2. Chipper canter LinckV18. 2x85 KW motor with direct drive. Completely refurbished set. Gbedpfxsrvh Tme Afnjh We can also offer full electrical installation and assembly of line on site.

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Weight: 3165 kg Max log diameter: 254 mm Gsdpfx Afshclffenjbh Söderhamn Eriksson 670-56 CC chipper with electric motor. Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: used, Double-shaft shredder Godpfxsxgtcve Afnebh Drive 37.50 KW

Condition: reconditioned (used), Year of construction: 2005, Allgaier Screening Machine | Gyratory Screen Type type ARSM 33-10 Godeq Iivaspfx Afnjbh completely reconditioned - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: completely reconditioned - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts free selectable - Design of outlets according to customer requirements Screening machine completely refubished (overhauled). Spherical roller bearings and spring struts are new. Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Condition: new, The Brugger SA38 impresses with an impressive splitting force of 12 tons and is the ideal solution for the quick and uncomplicated transformation of tree trunks into high-quality firewood. Logs up to 38 cm in diameter can be transformed into firewood with ease. The SA38 is characterized by its simple yet sophisticated design, which not only ensures high reliability, but also facilitates maintenance and repairs. Technical data - Up to 38cm diameter - Splitting power of 12 tons - 50cm Oregon sword - Log length from 20 - 50cm - Optional log lifter or chain conveyor - Weight 450kg Gbjdpfx Afopz I I Hsnjh Depending on your individual requirements, various drive options are available, a powerful 14 HP Kohler gasoline engine, a 7.5 kW 400V electric motor or a PTO drive with three-point linkage. Prices Brugger SA38 - 5.499€ infeed conveyor 100cm - 590€ discharge conveyor 350cm - 895€ 6-way splitting knife - 199€

Condition: ready for operation (used), Planer (four-sided planer) Constant table Max. planing width: 605 mm Planing height 2-sided: 200 mm Planing height 4-sided: 200 mm Feed rate: 7 - 9 - 11.5 - 14.0 - 18.0 - 23.0 m/min OPTION: Feed speed up to approx. 50 m/min Motors Bottom cutterhead: 7.5 kW Top cutterhead: 11.0 kW Right vertical spindle: 11.0 kW / D 40 mm Left vertical spindle: 11.0 kW / D 40 mm 5th horizontal spindle: 15.0 kW Feed: 2.4 / 3.0 kW Thicknessing: 1.1 kW Cutterheads with 6 knives For feed speeds up to 24 m/min, 3 knives are sufficient 3 knives operating, and 3 sharp knives are in reserve position Additional unit: 5th working shaft horizontal 15 kW Outfeed unit roller width: 350 mm Machine is sold in condition A, B or C: A) as is B) repaired C) repaired and with new electrics Gbedpfewg S Tvjx Afnsh OPTION Pre-planer at the machine infeed with planing head width of 200 mm and 3.5 kW motor

Condition: excellent (used), Year of construction: 2015, Stravis sawmill line with Jabłoński automatic edger after complete renovation. Condition like new. The line consists of: 1. Log conveyor for 5m logs with a cascade feeder 2. Caterpillar-chain saw 110 + 90 kW 3. Multi-blade saw (2 x 75 kW) spindle diameter 80mm 4. Roller conveyor l- 6m with a mechanism for stopping the movement of the left prism 5. Crosscut saw from 0.8 m to 5m 6. Base conveyor 7. Roller conveyor l=3.5m 8. Driven roller conveyor 4.5m 9. Driven roller conveyor l=4.0 m with a board dumping mechanism 10. Transverse belt conveyor b=3m, l=5m 11. Transverse belt conveyor with a pick-up b=2m, l=5m 12. Longitudinal belt conveyor b=0.4m, l=5m 13. Automatic edger Jabłoński 14. Gooseneck Jabłoński 15. Cross feeder with a scanner measuring the width of the board 16. Centering for the edger 17 17. Edge separator 18. Crosscutter from 0.8 m to 3.0 m 19. Gooseneck 20. Automatic stacker Jabłoński Gbodpov Iyhfsfx Afnsh 21. Non-regenerated crosscutter Jabłoński 22. Bruks chipper with control (you need to make a belt or vibrating gutter) Assembly and start-up at the customer's premises is possible. Possibility of sending videos of the working machine before renovation. Possibility of setting the line in a turn or along the length. Optionally, construction of a base for the line. OPPORTUNITY

Condition: new, Year of construction: 2024, A vineyard post roll forming machine is used for vineyards and orchards to produce the stakes and posts. Normally, grape posts are 1.5-2mm thickness. The production line consists of Decoiler, Servo Feeder Straightener, Press, Stamping Tool, Roll Form Machine and Shear. Gsdpfet Tcz Uex Afnebh

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 3,040 h, power: 90 kW (122.37 HP), CAR BASKET MULTITEL ALU 160 – 16.30 m ON NISSAN VEHICLE (B CATEGORY) Year of production: 2014 | Registration: 1G | Condition: Excellent A RELIABLE CAR BASKET FOR PROFESSIONAL USE The Multitel ALU 160 car basket, mounted on a Nissan vehicle, provides the ideal combination of mobility, efficiency and ease of use. Thanks to the ability to operate with category B, this model is the perfect choice for field work, service stations, utility companies and assembly companies. TECHNICAL SPECIFICATIONS Working height: max. 16.30 m (operational up to 16.5 m) Horizontal reach: up to 7.95 m at 200 kg (10.5 m at lower load) Bucket capacity: 200 kg Working range: 360° tower rotation Bucket rotation: ±60° Bucket dimensions: 1.40 × 0.70 × 1.10 m Supports: 4 hydraulic stabilizers Transport dimensions (L × W × H): 6.69 × 2.10 × 2.78 m Kernmanus weight: 3,350 kg | GVW: 3,500 kg Engine: Diesel 90 kW | Standard: EURO 5 Mileage: approx. 76,800 km |Operating hours: approx. 3,040 h MAIN ADVANTAGES Suitable for drivers with category B Compact, reliable and easy to maneuver construction 360° working circle for maximum flexibility Serviced and ready to work Available service and spare parts in Croatia Possibility of independent inspection (TÜV Croatia or SGS Adriatica) MODEL DESCRIPTION The Multitel ALU 160 is known for its durable aluminum construction and reliable hydraulic system. Thanks to four hydraulic supports and 360° rotation, it enables safe and stable operation in all conditions. Easy operation and compact dimensions make it ideal for working in urban areas and confined spaces. CHECK AND INSPECTION All vehicles undergo a detailed check in our specialized workshop (Trigon Dizalotehnika Servis) - including mechanical, hydraulic and body elements. Gjdpfxjxvyyaj Afnjbh At the customer's request, we also organize an independent inspection through the accredited body TÜV Croatia d.o.o. or SGS Adriatica d.o.o., which includes: Functional check of the lifting system, stability and safety switches Visual and technical analysis of the supporting structure and hydraulics Technical condition report with photo documentation Certificate of compliance with EU safety guidelines (Directive 2006/42/EC) This gives the customer an additional layer of confidence and the ability to independently verify the condition of the machine before purchasing. DOCUMENTATION AND SERVICES Service book and documentation available for inspection Assistance with registration and import Vehicle delivery to your location in Croatia or the EU Possibility of leasing or financing Replacement of old vehicle by agreement TRIGON DIZALOTEHNIKA d.o.o. Importer and general representative of Multitel and GSR car baskets for Croatia, Slovenia, Montenegro, Bosnia and Herzegovina and Serbia. More than 30 years of experience in sales, service and rental of work platforms. First hand – service, spare parts and technical support available throughout Croatia.