Laser cutting machine

Bystronic Bylaser 4400

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. Csdpfx Abjrq D Nij Ujra The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: used, Year of construction: 2006, pressure 100 t chamfer lenght 3100 mm distance between columns 2550 mm column arm 400 mm table height 925 mm stroke 200 mm control Cybelec DNC 8805 output 11 kw total connected load 15 kW weight of the machine ca. 9,0 t range L-W-H 5,2 x 2,1 x 2,9 m Used CNC- press brake - some upper tooling (no lover tooling) - Infrared security device - documentation - hydraulic Crowning Cjdpfx Asw Rf Hijb Ujra - 2 axis backgauge X + R

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, stroke length: 300 mm, operating speed: 90 mm/s, throat depth: 1,000 mm, total length: 4,520 mm, total width: 1,900 mm, total height: 2,950 mm, overall weight: 15,000 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Lenze, controller model: 9300, working width: 4,520 mm, bending force (max.): 150 t, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 2,900 mm, distance between stands: 3,200 mm, installation height: 950 mm, control type: CNC control, back gauge adjustment: CNC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, Safan press brakes are reputable sheet metal working machines from the Dutch manufacturer, well recognized in the market. The SAFAN E-Brake series is equipped with electric drives, which have been successfully implemented in our machines for almost 30 years. Currently, the largest model of electrically driven presses is available with a capacity of up to 300 tons and features a patented design by the manufacturer. Lenze motors and servomotors, controlled by long-life inverters, enable fast and reliable operation of the system for many thousands of operating hours. Thanks to its innovative drive, the machine uses electrical energy primarily during the downward movement of the ram and the bending process. The return of the ram is achieved by the force of springs mounted on both sides of the machine. Additionally, during idle periods, the machine consumes virtually no electricity, as the system does not include a hydraulic pump motor maintaining pressure, as is the case with hydraulic presses. Energy consumption is estimated to be up to 70% lower compared to conventional hydraulic presses. Furthermore, the electric drive is insensitive to temperature fluctuations that may occur in production halls. The machine performs excellently in both long and short production runs. Safan E-Brake 150-3100, model year 2007 - Safan TS 1 controller - 2D bending system - 13” color touchscreen - Control panel on a movable arm - CNC-controlled Y1/Y2 axis - CNC-controlled X axis - CNC-controlled R axis - CNC-controlled Z1 + Z2 axis - Wila upper tool adapter (mechanical clamp) - Safan OBS/3 lower tool table (compatible with Wila and Promecam tools) - Lightguard safety system with upper beam descent control - Work area lighting at the front and rear of the machine - Electrical installation: 3/N/PE 50 Hz 400/230 V - Opening: 690 mm - Table length: 3060 mm - Distance between machine frames: 3300 mm Codpfxex Ewnpe Ab Uora

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, pressing force: 135 t, stroke length: 400 mm, operating speed: 200 mm/s, oil tank capacity: 150 l, overall weight: 9,500 kg, travel distance X-axis: 625 mm, controller manufacturer: ESA, controller model: ESA S550N, working width: 3,050 mm, bending force (max.): 135 t, back gauge speed R-axis: 50 mm/s, back gauge travel distance R-axis: 180 mm, back gauge travel distance Z-axis: 2,100 mm, control type: CNC control, degree of automation: automatic, number of support arms: 2, back gauge adjustment: CNC-controlled, number of axes: 8, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, A very well-equipped machine with Y1 / Y2 / X / X1 / R / Z1 / Z2 axes and hydraulic upper and lower tool clamping. The control unit has just been overhauled by the manufacturer, and the machine works flawlessly. Cedpfx Ajwqhw Eob Ujra

Condition: excellent (used), Year of construction: 2005, operating speed: 10 mm/s, reverse speed: 120 mm/s, working width: 3,100 mm, bending force (max.): 120 t, back gauge travel distance Z-axis: 1,000 mm, control type: CNC control, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Crodpsxzf Dzefx Ab Uea Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X / Z1 / Z2 / R-Central Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2000, Control system retrofit 2026: CybTouch 15 Windows Press force 100 t Bending length 3100 mm Stroke 215 mm Safety distance 350 mm Frame width 3250 mm Compressed air max. 8 bar Closing speed 200 mm/s Pressing speed 1-10 mm/sec Total power requirement 7.5 kW Machine weight approx. 8,000 kg Crjdpfjwn Ebvjx Ab Uoa Dimensions L-W-H 3450x2000x2800 mm

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Used hydraulic press brake Cjdpfsyklwnex Ab Ujra Manufacturer: Hämmerle Model: 200-3100 Year of manufacture: 1995 The machine is supplied with numerous tools (press brake knives).

Condition: used, Year of construction: 2016, operating hours: 27 h, total length: 3,900 mm, total width: 1,600 mm, total height: 2,300 mm, Weight: 6.650 kg Price: On request - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 27 - Drive system: CNC - Control system brand: Delem - Control system type: DA-66T - Power [kW]: 7.5 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 100 - Max. working width [mm]: 3100 - Column gap [mm]: 2600 - Throat depth [mm]: 300 - Backgauge depth [mm]: 800 - Max. stroke [mm]: 140 - Crowning system: CNC-controlled - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 3900mm x 1600mm x 2300mm (l x w x h) - Transport weight [kg]: 6650kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Cjdpeyrn Edjfx Ab Uera Lukas van Rossum

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, ELECTRONIC RETROFIT IN 2001 Maximum press force 2000 kN That equals 200 tons Maximum working length 3100 mm Maximum stroke 400 mm Throat depth 250 mm Machine weight 16,600 kg Electrical data Operating voltage 400 V, 50 Hz Control voltage 24 V DC Power Main motor 22 kW Total connected load 28 kW Fuse rating 100 A Hydraulic oil specification HLP46 or HLP68 HM46 or HM68 his machine is equipped with CNC numerical bending control. Bending method 3 point bending, Normal mode Measurement and positioning axes visible in control Y1 and Y2 for ram positioning X axis for backgauge depth Z axis for backgauge lateral positioning R axis for backgauge height Typical positioning accuracy for this class of machine Backgauge repeatability approx ±0.05 mm Bending angle accuracy depends on tooling and material, typically ±0.3 to ±0.5 degrees Crjdpfoyf Ibxjx Ab Uea The control calculates bend angles based on Material thickness Tool geometry Press force Bend allowance Main intention of use The primary purpose of this machine is precision bending of sheet metal parts. Typical operations Straight bends Box shapes U bends Complex multi step formed parts It is designed for medium to heavy gauge sheet metal over long bending lengths.

Year of construction: 2000, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible. Crsdpfsw N Shkox Ab Usa