Used Widoberg for sale (49)

Condition: new, Year of construction: 2027, Machine for grinding, satin finishing, or polishing flat parts and profiles (finishing profiles, transition profiles, expansion joints, skirting profiles, decorative profiles, stair and terrace profiles, tile trims, edge protection profiles, renovation profiles). Benchtop polishing machine / automatic flat polishing machine for parts up to 3,000 mm in length (longer products available upon request). Equipped with one or two processing units. Chodpfx Akog D Rfmenoc Base machine and control cabinet are new; processing units are used but fully refurbished with new motors. Further information available upon request.

Condition: good (used), Year of construction: 2001, functionality: fully functional, grinding width: 150 mm, grinding height: 100 mm, type of input current: three-phase, input voltage: 400 V, Equipment: rotational speed infinitely variable, GREIF 7 station flat surface grinding machine, wet grinding, for square tubes and flat material, 7 belt grinding stations with 4 kW power each, frequency controlled at each station, each station can be swiveled by +-15° for cross grinding, max. grinding width 150 mm, max. grinding height 100 mm, diameter contact disc 200 mm, sanding belt dimensions 150 x 2500 mm, pneumatic belt tension, sanding belt oscillation, machine including return conveyor belt, including paper filter system with 1500 liter capacity. Since the contact wheels are directly driven, this system could also be used for polishing or brushing. If desired, this system can also be offered completely overhauled. Chsdpfetq Twvjx Aknoc

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, input current: 16 A, KUHLMEYER Type ZBS Twin-Belt Grinding Machine - incl. automatic mode and scissor lift table Cedpfxjza Uhhs Aknshc - for rough and fine sanding in a single machine - Machine location: The Netherlands - Further technical specifications, information, and videos of the machine are available upon request.

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1500 (maximum part processing length 1500 mm), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm Codow Au A Ejpfx Aknehc The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, power: 4.4 kW (5.98 HP), Löser KS100 BA contact belt grinding machine, centerless for pipes and rods, used, with pneumatic belt tensioning, year of manufacture 1999, in very good condition Cjdpfx Ajqk Uyaeknshc

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 22-009, Rotary spray cleaning machine YM-850 The YM-850 rotary spray cleaning machine is designed for efficient cleaning of industrial parts with hot pressurized water and biodegradable cleaning agents. This machine has very low running costs and low consumption. The machine frame and body are made of high quality corrosion-free stainless steel. This machine is the right choice for cleaning oil, grease and production residues on the surface of workpieces as well as for corrosion protection applications. The YM machine has stainless steel pump, spray nozzles, heating elements and motorized basket design as standard. - Spray cleaning system for small to medium batch sizes, - for workshop, maintenance or intermediate cleaning - Cleaning with hot water Cjdpfx Aetwmxyeknohc - Spray cabin as a top loader Technical details: Basket diameter: 700 mm Loading height: 380 mm Tank capacity: 120 liters Pump pressure: 8 bar Heating: 7.5 kW maximum loading weight: 120 kg Connection: 220-380 volts - 3 phases Timer: 0-30 mins Thermostat: 0-60 C° Stainless steel body: 430 AISI Filter cups: 2 pieces - 2-3 mm perforation Internal filter: 100µ

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Codjtmqi Depfx Aknohc Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. Chjdjpugwiopfx Aknec The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: refurbished (used), functionality: fully functional, Single-sided polishing machine, type 72711 (Metabo, IBS, IMM) - A total of 5 identical machines are available - Motor power 7.5 kW - 1500 rpm - Includes polishing guard - Polishing shaft diameter 35 mm - Polishing shaft height approx. 900 mm - Machines have been disassembled, cleaned, primed, repainted, fitted with new shaft and motor bearings, and new V-belts Chedox Iuvvspfx Aknjc - a total of 4 identical machines are available.

Condition: excellent (used), Continuous rotary table HAU R60 - 1800, with 60 workpiece spindles, mounted in a pitch circle diameter of 1800mm, 3 polishing units with 7,5 kW each, polishing shaft diameter of 50 mm, width of polishing wheel 2 x max. 400 mm and 1 x 280 mm, diameter of polishing wheel s max. 420 mm, motorized longitudinal and height adjustment of polishing units, machine equipped with liquid compound feeding system Chjdpfx Aksm Nbubsnoc More pictures on demand

Condition: good (used), Roller conveyor, frame and substructure made of stainless steel, transport height 1170mm, roller width 400 mm, length roller conveyor 3000mm - used, very good condition, available immediately Chodpjuhd Scsfx Aknoc

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1000 (maximum part processing length 1000 mm, respectively), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. Csdpfx Ajw Avpteknshc + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: new, Year of construction: 2023, Tube drilling machine, angle drilling machine, drilling automaton TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE INSPECTED WHILE POWERED ON - Minimum quantity lubrication - Manual material clamping - Manual feed - Max. tube length 3,000 mm (option 6,000 mm) - Positioning accuracy +/- 0.2 mm - 10 stops (can be extended as needed) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swivel device - Power of drilling unit 1 x 2.2 kW Cedpfx Aslgvkijknohc - Motor speed 295 - 2950 RPM - Display of speed on touch panel - Lighting of drilling unit - Integrated tool cabinet - Round tubes up to 114 mm - Square tubes up to 100 x 100 mm - Flat material up to 100 x 15 mm - T-profiles up to 100 x 100 x 12 mm - L-profiles up to 100 x 100 x 8 mm - Double posts up to 100 x 15 mm - Reaming up to M12 - Holes up to Ø 50 mm

Condition: excellent (used), Year of construction: 2004, Doublesided manual polishing stand make METABO, type 72730 with 5.5 kW, 1500 rpm, incl. two polishing covers. Machine was overhauled, blasted, repainted, new bearings for motor and polishing shaft, new v-belts. Chjdpfefw Uzxjx Aknoc

Condition: ready for operation (used), - double grinding and plishing machine - 1,5 kW - speed 1420 U/min - working hight is 600 mm - conical shaft Chedpedz Uzbsfx Aknjc

Condition: new, Year of construction: 2023, Pipe drilling / angle drilling machine, drilling automaton TDM100 2D AT - automatic, with two opposing drilling units Chedpfx Aolgzytjknsc - Minimum quantity lubrication - Manual material clamping - Automatic feed and automatic pipe rotation - Max. pipe length 3,000 mm - Positioning accuracy +/- 0.2 mm - Drilling unit power 2 x 2.2 kW - Manual loading and unloading of material - Drilling heads swivel +/- 50° - Manual 360-degree swivel device - Motor speed 295 - 2950 RPM - Operation via touch panel - 100 positions programmable - Drilling unit lighting - Integrated tool cabinet - Round pipe up to 114 mm - Square up to 100 x 100 mm - Flat material up to 100 x 15 mm - T-profile up to 100 x 100 x 12 mm - L-profile up to 100 x 100 x 8 mm - Double post up to 100 x 15 mm - Reaming drilling up to M12 - Holes up to Ø 50 mm

Condition: excellent (used), Rolei PEF 500 deburring and bevelling machine, basic model in interated in table (1200 x 788 mm, width x depth) made of aluminum profiles Cedsgkwckepfx Aknohc

Condition: new, Year of construction: 2025, DM1100 Z – NEW DESIGN – priced at €29,800.00 Deburring up to 1100 mm in width. The DM1100 Z refines and deburrs aluminum sheets cut by laser, punching, or shearing. This machine features a single wide-belt station that can be used to deburr parts with a size of 50×50 mm and a width of up to 1100 mm. The DM1100 Z is also suitable for surface finishing and can be operated with both standard abrasive paper and non-woven/scouring belts. Using an optional extension table, the new DM1100 Z can be combined with an existing DM1100 C edge-rounding machine. We also offer a parts return system for this machine. Cedpfx Aeimdmtoknohc

Condition: reconditioned (used), functionality: fully functional, BULA MP133 - Rotary table polishing machine make Bula, model MP 133 for sale Continuously revolving machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 8 workpiece holders mounted in a pitch circle of 600 mm. 3 processing stations, drive power per station from 4 KW, with Bula Quick Lock system of the polishing discs. Polishing shaft diameter 30 mm für BULA QuickLock Max. disc width 150 mm Max. disc diameter: 350 mm Base area approx. 1900 mm wide, approx. 2400 mm deep, 1700 mm high The machine is completely reconditioned, cleaned, sandblasted, primed and repainted. The BULA MP136 was equipped with new engines, a new gearbox and a new control cabinet. All drives are infinitely variable via frequency converters. Furthermore, the following has been renewed: bearings, belts, screws, hoods, etc. The machine is available immediately. Further technical details and price on request. Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 3 high-pressure dosing pistols WIDOBERG HDP-2, brackets, timer, etc. and pressure tank). Picture is just an example ! Chsdpewvq Ahjfx Aknec

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Chodpjlccvmofx Aknjc Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

Condition: new, Metal Deburring and Edge Rounding Machine (Double Side). DM1100 2C, edge rounds top and bottom sides of metal parts in one single pass. This double sided operation machine deburrs metal sheets rounding its internal and external contours. Featuring 2 sets of double cross belts this machine removes sharp edges on stainless steel, steel and aluminum parts cut by laser, punching or shearing. This metal deburring machine can easily edge round parts with small dimensions, being capable of deburring different shapes and parts sizes from 50mm up to 1100mm. Chjdpfxod Ev Ups Aknsc Processes simultaneously both sides of metal sheet parts cut by laser or punching machine, saving time and reducing operation costs. Additional conveyor belt and support table enables single side edge rounding of metal parts down to 50x50mm. DM1100 2C can edge round metal parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Easy and tool free cross belt replacement. Program for automatic positioning of upper and lower cross belts in order to improve the access, reducing replacement procedure time. High performance on all edges and also on internal holes. Easy to use with an integrated touch screen for monitoring the working settings and the machine alarms. Technical Details: Working capacity (mm) 1100x50 No. Cross belt stations 2 Cross belt speed (m/s) 2-8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) (4x) 3 Feeding motor (kW) (3x) 0.18 Total power (kw) 13.1 Consumption (A) 30 Dust extraction connection (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210

Condition: new, Long belt sanding machine LMD2500 incl. deburring tool - NEW - Delivery time on request The LMD 2500 is a long belt machine with a flexible sanding belt that allows for the processing of both flat surfaces and corners or material edges. This machine is ideal for processing irregular shapes, removing weld seams, and deburring and rounding laser-cut parts. The flexible and motor-adjustable table is perfect when the workpiece cannot be easily moved due to its large dimensions. With the LMD2500, you utilize the adaptability of the long belt together with different sanding tools such as a sanding shoe, manual pad, and deburring brush or disc to process the required areas. - Sanding of flat surfaces with the contact roller - Stroke finishing with a flat pad - Sanding of weld seams - Deburring of laser-cut parts - Processing of large areas - Interchangeable finishing tools - Flexible deburring/edge rounding station - Pneumatic belt tension - Tool carrier with counterweight system - Contact roller tool - Flat tool - Manual backing pad 100*80mm - Sanding belt with variable speed (8-25 m/s) - Edge rounding tool Codpfx Akeg I Ipksnjhc - Includes: o Deburring disc holder Ø150mm Medium SH hardness o Sanding disc Ø150mm g120 ceramic with hook-and-loop backing x5 o Surface finishing disc Ø150mm with hook-and-loop backing o Edge rounding brush Ø150mm. Fine aluminum oxide o High-adhesion rubber mat (1000x600mm) for small parts o Brush speed 600-1700 rpm o Sanding belt 7800x120 mm

Condition: new, Year of construction: 2024, Linishing machine for flat parts or rectangular tubes. Working capacity (mm) 120x120 Abrasive belt speed (m/s) 20 Codjg R Sxvjpfx Aknshc Abrasive belts (mm) 120x1850 Conveyor belt speed (m/min) 12 or 6+12 Abrasive belt motor (kW) 3 Consumption (A) 7 Dimensions approx. (mm) 975x880x1800 Weight approx. (kg) 350

Condition: good (used), internal grinding machine for pots / holloware up to Ø 400 x 600 mm hydraulic movement of grinding heads Csdpfx Aebdfr Teknohc complete with vacuum pump and basic vacuum fixture incl. hydraulic unit and control cabinet

Condition: good (used), Indexing table HAU RK 6-1200, 6 work piece spindles and 4 polishing units type PES, 11 kW each, max. width polishing wheel 300 mm, incl. oscilation, electr. driven hight adjustment, liquide compound feeding system (spray guns + pressure tank, control cabinet Price and additional information on request. Cheds R Ecgspfx Aknec