Press Brakes

BYSTRONIC P130/310

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 38,732 h, working width: 3,100 mm, travel distance X-axis: 600 mm, back gauge speed R-axis: 200 mm/s, back gauge travel distance R-axis: 250 mm, pressing force: 130 t, TECHNICAL DETAILS Control: MMC ByBend Working area Bending length: 3100 mm Column clearance: 3200 mm Pressing force: 130 t Working height: 1060 mm Thrust: 250 mm Stroke: 400 mm Installation height: 915 mm Axes & travel paths Controlled axes: Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 X-axis travel path: 600 mm X-axis travel speed: 500 mm/s R-axis travel path: 250 mm R-axis travel speed: 200 mm/s Y-retraction: 150 mm/s Y-working speed: max. 1-10 mm/s Y-rapid traverse: 150 mm/s Back stop: 1200 mm MACHINE DETAILS Machine dimensions (LxWxH): 4440 x 2950 x 3100 mm Machine weight: approx. 13,400 kg EQUIPMENT - Tool holder with hydro cushion (top) and 3-point die holder (bottom) with hydraulic tool clamp - Sliding table for flattening operations - BWS-T protective devices as access protection at the rear (Sick safety curtain) & BWS at the front - Bending aid at the rear (0-75°) with brush inserts, H, A, W axes continuously programmable - Pair of stop fingers (complex) Fsdpfxsv E Iu Ue Agrjpb - Side stop for dies - Table extension (station) left for supports - Additional plates for dies V=60 and larger - Additional foot switch for second operator or station - Articulated arm for control Extensive tool package included in delivery

Condition: good (used), Year of construction: 1994, CNC Spiral bending machine, capacity 50cm3, min-max diam of coil 500-3.500mm. Fpsdpfx Aoiu Acpegreb

Condition: excellent (used), Year of construction: 2008, Technical Data: Working length: 3550 mm Stand width: 3050 mm Press force: 230 tons Fpodpjwntqxjfx Agrsb CNC control: CYBELEC ModEva 12S controlled axes: Y1/Y2; X1/X2; R; Z1/Z2 Stroke: 550 mm Throat depth: 410 mm Mounting height: 745 mm (extra high) Table width: 140 mm Working height: 1065 mm CNC-controlled crowning CE marking Motor power: 42 kW Dimensions (length x width x height): approx. 4650 x 2350 x 3100 mm Weight: approx. 25 tons Accessories: 2 pcs. CNC-controlled bending aids, front side 1 pc. CNC-controlled bending aid, rear side!!! The seller is not liable for typing or data transmission errors. The machine corresponds in appearance, technology, and wear to its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2021, Press brake Bernardo AKPL 1600 x 40 Technical data: Pressure force: 40 to bending length: 1600 mm distance between stand:1200mm stroke length: 100 mm Backgauge: 0 - 500 mm Projection: 200 mm Fpedpeftuywefx Agrsb table width: 150 mm table height: 760 mm Forward speed: 60 mm/sec Bending speed: 8 mm/sec Return speed: 60 mm/sec. oil tank: 130 litres Engine power: 4,0 kW width: 2050 mm depth: 1800mm height: 2030mm Weight ca.3030 kg

Condition: good (used), BYSTRONIC HYDRAULIC BENDING MACHINE 3100X150 TON, MAX STROKE 315 mm, RAPID STROKE DOWN 190 mm/s, WORKING CYCLE 10 mm/s, RAPID STROKE UP 150 mm/s, DIMENSIONS: 415X200X290cm (h) WEIGHT 11,000 KG Y1 Y2: hydraulic cylinder axes. X forward and backward axis of the register. R upward and downward axis of the register. Fodpfevxipgex Agrspb Z1 and Z2 axes of the movement to the right and left of the stops. X1 or relative X which is the axis of the movement forward and backward of a single stop. 7 axes. The control also manages the hydraulic crowning, which can be considered the eighth axis.

Condition: used, functionality: fully functional, load capacity: 18,000 kg, lifting height: 11,900 mm, fuel type: electric, mast type: telescopic, construction height: 1,990 mm, empty load weight: 21,650 kg, total length: 5,540 mm, drive type: Elektro, construction width: 2,000 mm, Pick & Carry Crane Mast type: Telescopic Technical condition: good Front tires type: Non Marking Fpsdpfot Dd Uwox Agrsb Rear tires Type: Non Marking Remote control

Year of construction: 2011, condition: reconditioned (used), Boschert tool grinding machine EASY SHARP Equipped for Trumpf tooling system (Amada system optional) Machine for punching tool maintenance with cooling system and especially powerful motor, therefore also suitable for use with diamond grinding wheels. Fpjdoid I T Ispfx Agrob Used machine is currently being overhauled Equipment for Trumpf tooling system up to size III Accessories: Tool holder for punch flat and whisper Die holders for size I, II and III New corundum grinding wheel Dressing diamond Cooling system and machine base revised Technical data: Grinding wheel diameter 175 mm height adjustment 150 mm working area 400 x 150 mm motor power 2,2 kW Motor speed 2825 rpm Optional adapter for Amada system available Pictures similar

Condition: excellent (used), Control : D.Electron Z 32 centre height 220 mm Centre distance 1000 mm turning Ø over bed 440 mm turning diameter over slide 245 mm Travel -Z axis 750 mm width of lathe bed 320 mm spindle mounting CL 6" spindle bore 62 mm Fsdpfsd Sitkox Agrjpb spindle speeds 0 - 2000 rpm rapid traverse X/Z 7 m/min quill travel by hand 200 mm quill diameter 80 mm quill mounting MK 4

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Fjdpfjwq Dpqjx Agropb Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

Condition: used, Year of construction: 1999, Technical details: x-travel: 3 500 mm y-travel: 2 200 mm z-travel: 1 200 mm c-axis: +/- 200° control: Heidenhain TNC 426 spindle rpm - counter clockwise:: max. 10000 spindle rpm - clockwise:: max. 10000 distance between columns: 2 500 mm distance spindle /table: vertical: 1230 mm clamping surface area: Tisch: 3000 x 2000 mm table load: 10 t tool taper: HSK A 63 feed:: X/Y/Z: max. 20 m/min. compressed air: 8 bar total power requirement: ca. 100 kW weight of the machine ca.: 40 000 kg dimensions of machine: 18,0 x 6,0 x 5,8 m 5 axis Portal Milling Machine 5-axis portal milling machine Milling spindle: make Hauser type HS 256A-01 Uni, speed max. 10.000 rpm. direct drive Milling head: make Hamül, fork type, A-axis integrated = angle of rotation +/- 110°. Tool changer: Hamül make, rotary indexing table type with rotary table, for 32 tool positions chip conveyor: 2 pieces hinged belt conveyor make DGS with water tank, insertion length 8.500mm Fedpfou Nc Emjx Agrepb make BKW type DL 55V-2KK, capacity 2,41 l/min.; (combined for oil- water mixture for oil and spindle cooling) Cooling lubricant system: belt filter make DGS type SBF 150 Operation: via control panel type Heidenhain LE 426 X-, Y- and Z-axis with Heidenhain measuring rods. manual control unit HR 410 hydraulic counterbalance (Z-axis) Equipment: Enclosure (protective walls with viewing windows and protective doors) hydraulic system working area lighting *