Recycled board

Cape retestadora

Condition: used, Wursten & Dietz mechanical nailer. Lrodpslvripjfx Ab Tsh Prepared for nailing skates. The machine is sold as is.

Condition: good (used), Year of construction: 2011, Fully automatic wood infeed with feed roller conveyor Extension of transverse feed conveyor and feed roller conveyor for timber lengths up to 13 m Transverse loading and feed conveyor Under-table swing cross-cut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse grooving mill Ledpfswuppwox Ab Tjrh Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector 5-arm wood rack Safety devices and protective guards

Condition: used, Year of construction: 2000, functionality: fully functional, Holtec sorting block train, type SBZ. Length 94.5 m. 52 boxes. Lrjdpfx Asw Ug Ageb Teh

Condition: new, Year of construction: 2026, A550 Fully Automatic Solid Wood Saw 9 m Fully automatic cutting of medium-large wood with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Your fully automatic saw can optionally come as an inline optimiser saw. For every piece of wood you place down to cut, no matter what length, a laser sensor will measure its length. Our powerful optimisation algorhithm then takes your cut list and calculates the best order of parts to cut from this wood so that wastage is minimised. All of this happens on-the-fly, during the machine operation process, and without needing any input from you. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and wood feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk wood cutting Model: A550 Length: 9 m Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser Ljdpfxjf Ekngo Ab Tjrh QUALITY AUSTRALIAN-MADE MACHINES.

Year of construction: 2010, condition: good (used), 2250mm pallet nailing line Semi-automatic nailing table Lrsdpfjpy H Erjx Ab Tsh Turner + (optional marker) Stacker (3000mm maximum) Transfer

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 11470, functionality: fully functional, workpiece width (max.): 450 mm, Hundegger K2 in very good condition, overhauled, rebuilt, and commissioned by Hundegger. Since then, it has only run for about 20 hours and was professionally dismantled and stored in a heated hall. Ledjwhpavjpfx Ab Tjrh

Condition: used, Year of construction: 1993, functionality: not functional, Platon Stacker Lsdpfxopy H E Ds Ab Tjrh 7 meter transfer

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Lrsdpfx Abepbvqvo Toh Weight kg 8100

Condition: new, Year of construction: 2026, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. CBF Block Feeder is a flexible, compact and efficient block feeder for pallet production. User-friendly program. The machine lifts one row of blocks at a time from a stack of blocks. The machine also removes paper / cardboard automatically if it appears in the stack. The machine is controlled from a 10" touch screen. Beckhoff control system. The machine's travel length can be changed according to the customers needs to retrieve blocks from several packages/stacks. Capacity: - Approx 5 work cycles / min Machine dimensions: - Length 2000-6000mm, Width 2500mm, Height 2900mm The machines is CE-marked. Lrsdpfx Abeh Dpxds Toh The machine can be equipped with a belt conveyor and much more. For more information, pictures or videos take contact.

Condition: used, Year of construction: 1999, pressure 180 t chamfer lenght 3100 mm distance between columns 2550 mm throat 310 mm stroke 200 mm ajustment speed 80.0 mm/sec working feed 10.0 mm/sec return speed 58.0 mm/sec dayligth 385 mm table width 240 mm work height max. 885 / 1050 mm oil volume 180 ltr. total power requirement 15.0 kW weight of the machine ca. 9850 kg. range L-W-H 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition (!!) - in checked condition - machine video - ?v=o_t9BBMsNNs Equipment: - simple, conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electric back stop, with ball screws (X axis) * with 4x manually adjustable stop fingers Lodpfx Aexab Ereb Tjrh * fine adjustment via handwheel at the front, with analog position display - electro-motor adjustment of the immersion depth (Y1 + Y2 axis) * with digital position display - swiveling operation, mounting side on the left - 1x set of upper tools - 1x rotatable MULTI V universal die block - 2x front / movable support arms - 1x freely movable 2-hand foot control - operating instructions (PDF)