UV-Dryer Cefla Ecolight 2 tubes without conveyer

Cefla Eco Light

Condition: used, for installation on an existing bar conveyor scope of delivery: Housing of the tube with exhaust fan and switch cabinet Rjdpfevun Uyox Ab Uobw without cross bar conveyor - Producer Cefla - Type ECO LIGHT - Working width 1.300 mm - Number of lamp from top 1 Stk. - Lamp straight to conveyor - For mercury lamps - For gallium lamps - Mirror pivoting - Total connection power 14,61 kW - Location - Voltage / HZ 400 / 50

Condition: good (used), Year of construction: 1996, Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 - pulling rollers in the table top TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 lower spindle 7.5 kW feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp Rbodpfoh Dwl Djx Ab Usw spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm weight ~ 3000 kg

Year of construction: 1996, condition: excellent (used), Automatic slotting machine with two oscillating tables BALESTRINI 2CAP Maximum length of the groove 120 mm Maximum recess depth in mm 80 Spindle speed 9000 rpm Spindle motor 3 Hp Oscillating motor Hp 1 Rjdpogmucpjfx Ab Uobw Pneumatic clamp for the workpiece Overall dimensions: mm 1000 x 900 x 1250 Weight kg 500

Year of construction: 1999, condition: excellent (used), 21 drilling spindles Spindle spacing 32mm Pneumatic clamps Possibility to drill vertically, horizontally and at an angle of 45 * Depth adjustment from 0 to 80 mm Rsdpfx Ajh Txmtsb Usbw

Condition: used, machine/vehicle number: 3281, - Producer Elmag Superfici - Working width 1300 mm Rbodoumvmkepfx Ab Usw - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80 / 40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Condition: as good as new (ex-display), Year of construction: 2009, Dryer with direct heating (L=1300mm) - Number of lamps ..... 1 - Lamp power (80 W/cm2) ..... 11.4 kW Rodpfx Aoryw Eijb Uebw (100 W/cm2) ..... 14.3 kW (120 W/cm2) ..... 17.2 kW - Power of the exhaust fan ..... 0.55 kW - Air flow of the exhaust fan outlet fan..... 900 m3/h - Installed power (120 W/cm2) ..... 17.7 kW - Minimum length of workpieces workpieces..... 400 mm - Maximum thickness of workpieces workpieces..... 70 mm - Maximum width of workpieces workpieces..... 1300 mm - Compressed air consumption ..... 4NI/cycle In addition, a set of new lamps included.

Year of construction: 2005, condition: ready for operation (used), Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible. Redpfxju Afz Re Ab Uobw

Year of construction: 1995, condition: used, SECOND-HAND SANDING MACHINE FOR TURNED PIECES LOCATELLI MOD. ORIENTAL MATIK Rodpehy Tvmefx Ab Uebw -with loader -working length 1200 mm

Condition: excellent (used), functionality: fully functional, Single-sided edge processing line HOMAG with feed speed up to 32 m/min, precise workpiece positioning with rolling block chain (instead of standard chain), enhanced mechanization, fully automatic workpiece infeed WZ14, with belt sanding unit for solid wood edges. Rbjdpfxswvlhlj Ab Uew Includes: Edge banding and sizing machine HOMAG, type: PROFI KFL350/13/A3/WZ Loading station / feed table HOMAG POWER TBL100/30/30/S Return system / BOOMERANG LIGMATECH, type: ZHR 30/L/185/F Edge bonding with PUR and EVA adhesives.

Condition: used, Year of construction: 2008, - Manufacturer Efsen/Cefla - Type Woodcure 1400 - Year of manufacture UV 2008, transport/conveyor 1998 - Working width 1,300 mm (1,445) mm - Working height 870 + - 20 mm - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. Rjdpevupdcefx Ab Uobw - Tube power 120 W/cm - Suitable for mercury tubes - Suitable for gallium tubes - Manufacturer of transport system Cefla - With cross bar conveyor - Bar spacing 95 mm - Feed adjustable via hand wheel ~ 5-25 m/min - Installation length: 3,500 mm - Width: approx. 2,100 mm - Volts, Hz 400 /50 - Total electrical connection 38 kW - Voltage fluctuations max. +/- 5%