Roll forming line

Concept stal s.j. T20

Condition: excellent (used), Complete production line for sale for manufacturing round metal rainwater drainage systems. Production starts from a sheet metal coil, then forms, stamps, and packages the products. All machines are in very good condition. The equipment is fully assembled and intended for mass production of: Bdjdpfx Afoy I Tq Sjxeg - Gutters - Gutter ends - Connectors - Corners - Brackets - Downpipe outlets - Elbows - Downpipes - Branch connectors (Tees) - Packaging If you are interested in the offered equipment, have any questions, or would like to receive more detailed information, please do not hesitate to contact us. We will gladly provide the full equipment list, technical specifications, additional photos, or arrange an inspection of the production line. All equipment is connected and can be inspected in operation to see the full production process.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power: 24 kW (32.63 HP), coil weight: 10,000 kg, overall weight: 12,000 kg, The machine is available for immediate delivery. We offer a new D23 sheet metal roofing profiling machine with a 3D shear. The machine is new and ready for pickup. Type: D23 Year of manufacture: 2026 Serial number: 2502242007 Weight: 12,000 kg Maximum power: 24 kW Supply voltage: 3x400 V Supply frequency: (50÷60) Hz The machine consists of: Hydraulic unwinder, 10 tons + cross-over carriage, 10 tons; Sheet feeding system with rotary shears; Profiling section; Bdedpfszfi Thox Afxeg Hydraulic press for embossing; 3D profiling shear for cutting; Sheet collector, 5 m + collection carriage; Control cabinet. If you have any questions or require further information, please send a message or contact us by phone.

Year of construction: 2010, condition: ready for operation (used), A Thalmann long folding machine with a touchscreen control system renewed in 2025 is available. Working width: 8200mm, usable width: 8000mm, max. sheet thickness: 3mm, max. upper beam opening: 150mm, bending beam width: 12mm, feed rail: 12mm. Documentation available. An on-site inspection is possible. Bdodpfx Aey Tn N Hjfxjg

Year of construction: 1985, condition: excellent (used), strip width: 10 - 350 mm strip thickness: 0,2 - 2 mm No. of slits/strip thickness: 25/0,5 mm Bdsdpfxslilfbj Afxsg coil weight: max. 1 t

Condition: used, mileage: 351,440 km, power: 120 kW (163.15 HP), first registration: 04/2017, fuel type: diesel, tire size: 205/75R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, number of seats: 2, total length: 7,150 mm, total width: 2,200 mm, total height: 2,980 mm, loading space length: 4,100 mm, loading space width: 2,050 mm, loading space height: 1,890 mm, Year of construction: 2017, Equipment: ABS, Bluetooth, central locking, cruise control, electric window regulation, power mirror, seat heater, tail-lift, traction control, = Additional options and accessories = - Heated mirrors - Tachograph (driver's card) - Halogen lamp - None - Tail lift - Manual - Radio/cassette - Lane keeping assist - Fabric = Notes = Configuration: 4x2, dual tires, payload: 1910 kg, unladen weight: 3090 kg, gross vehicle weight: 5000 kg, type of cab: single cab, cruise control, tachograph (driver's card), number of airbags: 1, parking assist: None, electric windows, electric mirrors, radio/cassette, color: white, heated mirrors, type of lighting: halogen lamp, lane keeping assist, seat heating, Bluetooth, engine power: 120 kW (161 hp), fuel: diesel, Euro: 6, drive technology: timing chain, transmission type: manual, gears: 6, power steering, ABS, ASR, starter battery, roof rack: None, rear closure: double door, central locking, number of seats: 2, seat arrangement: 1+1, seat cover: fabric, seat adjustment: manual, manufacturer of refrigeration unit: Thermoking, model of refrigeration unit: V500 max, refrigeration unit: cooling compressor, type of cooling: freezing, day/night cooling: day cooling, tail lift, tail lift design: rear door, load capacity of tail lift: 760 kg, tail lift manufacturer: B.a.r, tail lift material: steel and aluminum, tail lift size: 212x160, battery for ramp, refrigerated box truck with tail lift, dual tires, 163 hp, Euro 6! = Further information = Axle configuration Tire size: 205/75R16 Brakes: disc brakes Suspension: leaf spring suspension Axle 1: tire tread depth left: 6 mm; tire tread depth right: 5 mm Bdjdpoya Uhnofx Afxeg Weights Unladen weight: 3,090 kg Payload: 1,910 kg GVW: 5,000 kg Functional Tail lift: B.a.r, rear door, 760 kg Height of loading area: 95 cm Refrigeration unit: engine-driven Condition General condition: average Technical condition: average Optical condition: average Damage: none Number of keys: 2 Identification License plate: 86-BTR-9

Condition: new, Year of construction: 2025, Window drip cap roll forming machine PO-1 allows to produce “window trim” profile by rolling the sheet metal through forming rolls. A window trim is an element that is widely used in construction while windows installation. In the standard way the window trim is bent step by step using a manual folding machine. This is a cheaper, but more time-consuming process. The metal sheet must be pre-marked for each bending operation. Bdjdelwt Adspfx Afxog Each bend is then performed using a manual bending machine. The operator must set the necessary dimensions according to the marks, fix the sheet metal with the machine"s fixation mechanism, and then bend it. The length of the window trim is limited to the maximum working length of the bending machine. Thus, each manual folding operation is time-consuming and the production process becomes expensive and inefficient. To improve the production process we offer the window drip cap roll forming machine PO-1. This machine rolls the window trim profile on both sides simultaneously in a single operation. The rolling speed is 10 m/min. The machine is equipped with 7 pairs of forming rolls. The minimum width of window trim is 120 mm when rolling on both sides at the same time and the maximum width is 610 mm. To change the width of the window trim, simply use the adjusting handle, which makes it very easy to adjust the machine to go from one trim width to the next. Thus, the adjustment process is not time-consuming. It’s also possible to roll the window drip cap on the machine in two steps.

Condition: new, Year of construction: 2026, nuIT software - welcome to the dream factory! Next level order processing. Fully integrated. Creation of metal trims anywhere. The nuIT software by CIDAN Machinery instantly transforms your sheet metal shop into the most efficient and cutting edge smart factory around. Designed by sheet metal workers for practitioners, our production management platform streamlines all aspects – from order placement and entry, to process control in your shop. Do you want your customers or sales team to order custom/standard flashing, panels, and accessories from the field and submit them directly to production? Do you want instant available data, in real-time, at the office within your production stage? Now it’s possible with nuIT. 4 reasons for nuIT sheet metal fabrication software Networking of various machines and simple creation and transmission of production data Process optimization from the construction site to the work preparation all the way into the production and accounting Automatic creation of various order data, calculations and documents Bdjdpjpl Uxysfx Afxjg Creates auto-generated branded PDF’s. The profile can also be sent directly to the production machine.

Year of construction: 2023, condition: new, Rotating device for handling components weighing up to 40,000 kg. Component diameter range: 500 mm to 6,000 mm. Bedoflmcxepfx Afxsdg Rotation speed: 100 to 2,000 mm/min. Control via handheld remote control (optional: wireless).

Condition: excellent (used), The minimum order quantity is 8 stations, with the price per station being €4,000. The stations are new. The line consists of stations for profiling shafts with a diameter of 50 mm and an 8 mm keyway. Material feed thickness ranges from 0.4–2.5 mm, with a strip width of 320 mm. Bsdpfx Ajwxv Nlefxjdg There are 8 stations per table, driven by a 15 kW motor with a reduction gearbox. Four sets of stations are mounted on robust steel beams measuring 45 x 700 x 1,500 mm. This allows for quick changing of rollers fitted with various spare modules for finished profiling station segments. This configuration includes two table segments with 8 stations each, providing a total of 16 profiling stations. The specified price applies per set of stations on a given table. These tables can be configured and assembled according to the required profile—e.g., with 8, 16, 24, or 32 stations. The table features a strip guide and a turk's head, a straightening head, and a profile output device before the guillotine shear, a flying saw, or a fixed take-off table. We offer various configurations of such solutions for these tables. By exchanging the shafts, we can achieve a maximum input width of 550 mm.

Condition: good (used), The scope of delivery includes: 1x steel beam, used Material color: white Overall length: approx. 4,020 mm Box profile height: approx. 130 mm Box profile width: approx. 50 mm Material thickness: approx. 1.75 mm Weight: approx. 25.50 kg | per piece Bjdoi Ez Nuepfx Afxsdg Note: - The steel beams may be slightly bent and may have dents or other damage. - 2 brackets and 2 angles are welded on.