CNC horizontal machining center

DECKEL MAHO DMC 60 H

Condition: used, Year of construction: 1995, x-travel 600 mm y-travel 560 mm Ledpfxet Hw R Rs Abnehh z-travel 560 mm Control SIEMENS 840 C total power requirement 12 kW weight of the machine ca. 10000 kg dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 2014, We are offering a top 3D scanner from GOM: GOM ATOS IIe Rev.01. The system is fully ready for connection, including all cables. Unfortunately, the PC is password-protected, but the software is included on CD. Various sensor heads: Measurement volumes: Set 175x140 Set 350x280 Lsdjw E I Itspfx Abnshh Set 550x Set 1000x800 Complete GOM PC in an aluminium case with Linux software, fully ready to operate with GOM ATOS IIe. Software on CD, steel scalebars with ATOS evaluation dongle. Spare lamp Calibration panel (aluminium) CP20/MV 350x280mm²

Condition: used, Year of construction: 2012, x-travel 630 mm y-travel 800 mm z-travel 750 mm control SIN 840D sl Siemens Ledpevxwxvsfx Abnohh B - axis 360 x 0,001 ° A - axis -200 -- +25 x 0,001 ° spindle turning speed - stepless 20 - 18.000 U/min power capacity at 100 % load 28,00 kW power capacity at 40 % load 34,00 KW max. torque at 40% / 100% load 110 / 84 Nm tool taper HSK 63 feed X/Y/Z/-axis 1 - 100.000 mm/min rapid traverse X/Y/Z 100,00 m/min feed capacity X/Y/Z 9 / 6 / 9 kN feed B-axis 1 - 14.400 °/min feed A-axis 1 - 7.200 °/min size of pallet 2x 500 x 500 mm workpiece weight max. 400 kg max. workpiece diameter 800 mm workpiece height max. 800 mm tool magacine with 63 diameter of tools max. 280 mm tool length - max. 550 mm weight of tools max. 15,00 kg total power requirement 65,00 kW weight of the machine ca. 14,00 t dimensions of the machine ca. 5,50 x 3,50 x H3,20 m 5-axis machining center with SIEMENS SINUMERIK 840D sl control, mechanical tool breakage control, emulsion mist separator, without chip conveyor and without coolant system.

Condition: used, Year of construction: 2004, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 500 mm, feed length X-axis: 600 mm, feed length Y-axis: 560 mm, feed length Z-axis: 500 mm, controller manufacturer: Siemens, spindle nose: DIN 40, number of slots in tool magazine: 180, Equipment: chip conveyor, documentation/manual, DECKEL MAHO DMC 60 H – 4-Axis Horizontal Machining Centre – 2004 Siemens CNC – 6 pallets – 180 tools – 20,000 hours A company in the aerospace sector is selling a DECKEL MAHO DMC 60 H 4-axis horizontal machining centre, year 2004, currently available for inspection under power and in production. Specifications: • CNC control: Siemens • Travels: X 600 / Y 560 / Z 500 mm • Tool magazine: 180 tools • Taper: DIN 40 • 6 pallets • Through-spindle coolant Lhsdpoy D A Rgofx Abnjh • Tool probe • Workpiece probe • Chip conveyor • Complete documentation • Low hours: only 20,000 hours • Visible under power and in production • Currently machining aerospace components • Test possible by appointment If you have any questions or need further information, please feel free to send us a message or call.

Condition: used, Year of construction: 2006, functionality: fully functional, center height in crank: 1,100 mm, workpiece weight (max.): 180,000 kg, grinding length: 11,000 mm, grinding wheel diameter: 1,066 mm, total length: 11,700 mm, quill travel distance: 11,700 mm, workpiece weight between centers: 180,000 g, distance between centers: 11,700 mm, POMINI CNC Roll Grinder Model HD-425-2-7L Siemens 840D, 12 Axes. Built in 2006. Two flatbed system grinding and workpiece ways are separate. Machine accuracy. Straightness 0.001-0.002 mm/m. Roundness 0.001-0.002 mm. Eccentricity 0.002 mm. Profile for crown height up to 0.1 mm ±0.002 mm/m. Surface finishing without chatter marks and no feed marks after finishing grinding stage. On an independent bed: Auto Caliper Diameter 870 - 2,250 mm. Eddy current crack and bruise detector probe. Ultrasound depth probe up to 180 mm. High Pressure wheel cleaner. Wheel dynamic balancing electromagnetic automatically or manually. Wheel dressing device with diamond. 2 Hydrostatic Steadies. 2 Hydrodynamic Steadies. 4 Soft landing for roles. Wheel quick change device incl motor. Lhedswdmy Sspfx Abnjh Jib crane. Vibration Measurement, recording on: Headstock base Neckrests Foot stock Wheel head Wheel head back Carriage Lateral side. Working Capacity. Grinding length 11,000 mm Max diameter with 1,066 mm Grinding wheel 2,200 mm Min diameter with 1.066 mm Grinding wheel 800 mm Center distance 11,700 mm Max Roll weight 80 Tons Max Roll weight with Steadies 180 Tons Min distance between wheel center and roll axis 845 mm Max distance between wheel center and roll axis 1,635 mm Carriage Axis Z, Hydrostatic Feeds, Infinitely variable 0-6,000 mm/min Oil film thickness 0.020 mm Distance between carriage ways 1,500 mm Ways width 160 mm Total length of the carriage on ways 3,385 mm Wheelhead on Carriage Axis X, Wheel Probe Axis A, Inspector Axis A1, Wheelhead cross travel Ballscrew, Axis X 940 mm Resolution axis X 0.0001 mm Wheel Spindle length 1,695 mm Spindle bearing, hydrostatic, diameter 254 mm Resolution Infeed micrometer handwheel, Axes X 0.00001 mm / division Continuous wheel infeed, U axis on radius 0 - 0.35 mm/min Rapid wheel indeed, axes X 0-830 mm/min Wheel motor, AC 130 kW Wheel Speed 400-1,100-1,600 rpm Wheel Cutting Speed infinitely variable Surface speed wheel diameter 1,066 mm 45 m/sec Surface speed wheel diameter 670 mm 45 m/sec Wheel hole, diameter 508 mm Wheel thickness 76 - 152 mm Wheel diameter 670 - 1,066 mm Crowning, Axis U. Max crown on the diameter 10 mm Max concavity on the diameter 10 etc Head stock Workpiece rotating speed 5 - 50 rpm Headstock motor 200 kW Max transmissible torque 76.5 kNm Faceplate control system V Belts Max Center diameter, metric type 160 mm Stroke of Quill 150 mm Length of headstock 3,110 mm Tail stock Quill diameter 260 mm Stroke of quill 750 mm Maximum center diameter, metric type 160 mm Taper Metric 5% on the diameter Tailstock length 1,300 mm Stroke of tailstock 8,000 mm Caliper, Arm Axis C, Carriage Axis V, Rotation Axis B. Max measurable diameter 2,250 mm My measurable diameter 870 mm Machine Dimensions. Machine weight 130 tons Length 19.5 m. Width 5.5 m. Height 3.2 m. Foundation depth 3.8 m.

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: SIEMENS, controller model: 840 D, table width: 500 mm, table length: 500 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 20,000 W, number of slots in tool magazine: 303, number of axes: 4, This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 4 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions. Additional equipment • Scraper belt chip conveyor with coolant system 980 liter, paper belt filter, discharge height 950 mm, width 380 mm, IKZ 80 bar / 14 l/min through spindle center (AD), pressure infinitely programmable, selectable via NC program, Roof flushing of the working area 180 l/min via flushing nozzles with a ripple valve • Rotating viewing window / work area door Ljdpfxoyi Ekfo Abnshh • Flushing gun with pump • Double gripper • Wheel magazine • NC rotary table Ø 630 mm • 3D path control Machine Benefits Qualitative Machine Benefits • Mcis tdi tool management (module tdi machine) - overview , tool handling, planning • Extraction mechanical and electrical preparation for oil mist extraction • Tool breakage check mechanical design Technical Machine Benefits • Number of pallets: 12 // round pallet storage: rs 12 • Rotary pallet changer // work table with pallet support // permissible load: 600 kg // 2 pallets 500 x 500 mm with t-slots // pallet management // pallet changer cladding // claw flushing pallet • Cooling through the spindle center: 80 bar • Tool magazine: wheel magazine (5 wheels) with 303 magazine slots hsk a63 • Infrared measuring probe renishaw pp60 optical (omp60) hsk-a 63 • Mpc machine protection control (machine protection through rapid shutdown) • Laminated glass safety pane for right-hand cabin door window Extra Information Documentation and Electrical circuit diagram (German) available

Year of construction: 2002, condition: used, functionality: fully functional, Horizontal machining center with double chain magazine. TECHNICAL DETAILS x-way: 600 mm y-way: 560 mm z-way: 560 mm control: Siemens Sinumerik 840D B - axis: 360 x 0,001 ° spindle speed - stepless: 8.000 rpm feed X/Y/Z/ axis: 1 - 60.000 mm/min feed B axis: 9.250 °/min rapid traverse X/Y/Z: 60.00 m/min feed force X/Z: 9.600 N Feed force Y: 8,000 N drive power 40 % ED: 20,00 KW driving power 100% ED: 13,00 kW Tool holder: SK40 Torque at 40% / 100% ED: 191 / 124 Nm Pallet size: 2x 400 x 500 mm workpiece weight: max. 600 kg tool magazine: 180 tool diameter: 90 mm tool diameter with 2 free places: 160 mm tool length: max. 350 mm Tool weight: max. 3.50 / 12.00 kg MACHINE DETAILS total power requirement: 65,00 kW machine weight: approx. 16,00 t Lhedjnh Rn Aspfx Abnsh space requirement: approx. 9.00 x 4.50 x 3.50 m EQUIPMENT Coolant system with IKZ Double chain magazine with 180 places Chip conveyor BLUM tool laser measurement electronic handwheel

Condition: new, PAK-1 Unbalance Measuring Unit is designed to modernize your balancing machine. A balancing machine has a long mechanical life, but prolonged use leads to gradual failure of electronics and measuring instruments, causing problems with spare parts and lack of technical support. Minimize downtime and ensure the reliability of your balancing machine by upgrading it with a new advanced measuring unit. The PAK-1 unbalance measuring unit works in all balancing machines of most existing designs and manufacturers. Confidence in results and ease of use: Easy to set up and work with, our devices do not require any special theoretical knowledge. Wide range of functions for your balancing machine: The use of modern microprocessor technology and many years of experience of our developers allows us to implement functions that were previously unavailable to other manufacturers. Your machine complies with ISO 21940: Balancing machines equipped with the PAK-1 unbalance measuring unit fully meet the precision requirements of modern standards. HIGHLIGHTS • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • The maximum sensitivity of the machine at any moment of operation, the set-up and calibration of the machine is carried out by the operator himself. • Free from the influence of external vibration factors on the measurement result, it has a high degree of protection against various types of interference. • Easy to learn working skills and maintenance for any employee. INCLUDES: 1) vibration sensor signal processing unit, 2) fanless industrial computer with touch screen, 3) new vibration and speed sensors, 4) metal protected cable set. SEQUENCE OF WORKS for modernization of the measuring unit - Replacement of the existing measuring system with the balancing complex PAK-1 based on an industrial computer; - Installation of new vibration sensors and rotor speed sensor - Replacement of all connecting cables; - Adjustment of the measuring unit on the balancing machine; - Training of personnel with skills to operate the machine. VTM GROUP offers to upgrade your balancing machine. We repair and modernise various old balancing machines of all types from all manufacturers. It's cost effective. An alternative to buying a new balancing machine in 95% of cases. Urgent. Lhjdpfx Ajq Ttn Dobnoh Work can be done at customer site within 1-2 days. New components for modernization of your machine: • Installation of new measuring system and vibration and speed sensors. • Installation of new electrical equipment • Manufacturing or repair of the rotation drive • Manufacturing of new rollers Every business is different. Let's discuss your task. We can offer a solution for any balancing machine. Please contact us to get the best offer! 👇

Year of construction: 1996, operating hours: 91,897 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 288, TECHNICAL DETAILS x-axis travel: 600 mm Ledpfolruxfjx Abnshh y-axis travel: 560 mm z-axis travel: 560 mm Control system: Siemens MACHINE DETAILS Connection voltage: 400 V / 3 phases / 50 Hz Connection power: 60 kVA Total power consumption: 12 kW Machine weight: approx. 10 t EQUIPMENT - 2 machine pallets - 1 measuring probe

Year of construction: 2000, operating hours: 47,085 h, condition: good (used), functionality: fully functional, machine/vehicle number: 42272, Machining center with 5 pallets Ljdpslrupaefx Abnshh TECHNICAL DETAILS x-axis travel: 600 mm y-axis travel: 560 mm z-axis travel: 560 mm B-axis (table): 360° Tool holder: SK 40 Pallet size: 5 x 500x400 mm Control system: Siemens 840D MACHINE DETAILS Supply voltage: 300 V / 3 phases / 50 Hz Power: 60 kVA

Condition: good (used), Year of construction: 2000, 20000 rpm, Ledpor Urm Ssfx Abnjhh tool measurement on table will come, Parts shown by hand not come.