Machining Centres - Vertical

DECKEL MAHO DMC 635V

Condition: used, Year of construction: 2007, Technical details: x-travel: 635 mm y-travel: 460 mm z-travel: 510 mm control: 3D Heidenhain i TNC 530 table-size: 790 x 560 mm table load capacity: 600 kg tool taper: SK 40 Revolution per minute: 20 - 10.000 U/min. tool changer with: 20 place spindle hours: 36.050 h operating hours - idle run: 91.000 h total power requirement: 13,9 kW Weight approx.: 3,6 t Blsdpfx Ajw A I Uujfxsl tool taper: SK 40 Tool changer: 20-fach dimension machine approx.LxWxH: 3,0 x 2,0 x 2,15 m

Condition: ready for operation (used), Year of construction: 2017, operating hours: 15,208 h, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 12,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of axes: 4, This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details. • Spindle torque: 111 Nm (continuous 85 Nm) • Tool capacity: 40 tools (optional magazine 60 tools) • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm • Number of pallets: 2 • Automatic rotary pallet changer: 2 stations • NC table B axis: direct drive, indexing 0.001°, max speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) Blodjyt Hwzjpfx Afxjl • Direct position measuring system; Linear scale standard • Control system: CELOS Siemens 840D sl with 21.5" ERGOline multi-touch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar • Renishaw probe OMP60 • Tool breakage detection system • Machine status signal lamp • Water-glycol spindle cooling unit • Application Tuning Cycle (ATC) • Machine bed: 3-point support • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA • Maximum input current: 67 A • Fuse protection: 125 A • Short circuit current: 1.25 kA • Maximum supply voltage: 4.0 kV • Supply voltage: 400 V ±10 % • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V • Operating time: 27,715 h • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll Flow Monitor • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper Size BT 40

Condition: good (used), Year of construction: 2010, operating hours: 43,000 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rotational speed (max.): 14,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, rotational speed infinitely variable, Machine has 2 pallet. Control is Siemens. Spindle was changes directly frm DMG servis - new spindel has cca 500 hours Bodpfxov Acpbe Afxjll

Condition: good (used), Year of construction: 2006, Parts shown by hand not come. Bjdpszk Iw Ajfx Afxjll Technical details shown on picture.

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand HAAS Model Sigma 5 Main Drive Bljdpfx Afex H Uz Njxjl Number of axis 2 This HAAS TR160 with Sigma 5 was manufactured in 2016. It features a 2-axis table and is equipped with a Sigma 5 servo motor, ensuring precise and efficient operation. Ideal for those looking to enhance their machining capabilities. Contact us for more information. Application Types Other Machine Tools

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Vertical Machining Center DECKEL MAHO DMC 635V Year of manufacture: 2009 CNC control: Siemens 840D Axes X-axis travel (mm): 635 Y-axis travel (mm): 510 Z-axis travel (mm): 460 Distance spindle nose - table surface (mm): 720 Feed rate (m/min): 20 Rapid traverse (m/min): 30 Axis acceleration (m/s²): 5 Work Table Pallet dimensions (mm): 560×790 Max. workpiece weight (kg): 600 Spindle Max. spindle speed (rpm): 14,000 Spindle drive power (kW): 18.5/15 (40%ED/cont) Spindle torque (Nm): 100/74 Bodpfxeyay D Uj Afxell Tool System Tool holder: SK40 Number of tools in magazine: 20 Electronic handwheel Chip conveyor Blow air through spindle selectable via M function Direct measuring system XYZ Machine Operating Hours: Total power-on hours: 14,500 Spindle hours: 3,600 Connected power requirement (kVA): 35 Basic Machine: Dimensions/Weight Length (mm): 2,275 Width (mm): 3,288 Height (mm): 2,670 Weight: 4.5 t Including vices and tool holders

Condition: good (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, Machine is being sold on behalf of the customer and can be inspected under power. Machine location: Czech Republic (Brno) Manufacturer: Deckel Maho Model: DMC 635V Year: 2007 Approx. 32,000 operating hours Control: Heidenhain iTNC 530 Spindle mounting: SK40 Speed: 10,000 rpm Travel (X/Y/Z): 635 / 510 / 460 mm Clamping surface (table): 790 x 560 mm 30-position tool changer + Blum laser tool measurement + Paper band filter / ICS 20 bar / 600 l + Chip conveyor Bjdpfxoylmdfo Afxsll Dimensions (approx.) LxWxH 260 x 390 x 240 cm Installation area 530 x 590 cm Weight: approx. 4,200 kg

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Bljdpfx Afslz Rvljxel Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2007, x-travel 635 mm y-travel 510 mm z-travel 460 mm control iTNC 530 Heidenhain power capacity - main spindel 13 / 9 kW turning speed range - main spindle 20 - 10.000 min/-1 Torque 83 / 57 Nm tool taper SK 40 tension force 10 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm Bsdpfxoyaci Ho Afxsll T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min Feed force 5 kN input unit 0,01 mm rapid traverse 30 m/min total power requirement 20 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V - Spindle-Runtime only approx. 7.883h - Power-On approx. 23.023h

Condition: used, Year of construction: 2013, x-travel 635 mm y-travel 510 mm z-travel 460 mm control Sinumerik 840 D SL Siemens turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 Bledpfx Afeym Dz Rsxel max. Torque 83 / 57 Nm tension force 8 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - distance 100 mm T-slot - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg table height over floor 720 mm distance spindle nose and table 120 - 580 mm number of toolpositions 30 pos. Max. mould width 80 / (130) mm max. tool length 250 mm max. tool weight 6 kg max. total weight 80 kg change-time tool to tool 1,6 sec change-time chip to chip 6,0 sec rapid traverse 30 m/min feed speeds 1 - 20.000 mm/min Feed force max. 5 kN total power requirement 28 kVA weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 4,0 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 635 V New Design - ShopMill - WITHOUT perforated plate - WITHOUT clamping device - WITHOUT tools

Condition: excellent (used), High-performance spot welding tongs with a double-acting cylinder Bledpfeki Tkpex Afxjl Manufacturer: DALEX, Type 3528 - 4 Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 31 kA Electrode force: 60-730 daN Double-acting cylinder, long stroke 62 mm, pre-stroke 40 mm Working stroke with stroke adjustment 0-22 mm with 5/2-way solenoid valve Cardan suspension and mounting bracket 10 m connection cable with control cable Arm extension: 170 mm Arm distance: 170 mm Complete with 1 pair of electrode arms, straight on the top and bottom, 170 mm Synchronous welding control MPS 1036 Example photo

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,641 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D powerline, table load: 600 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2008. It features a Siemens 840D control unit, a spindle speed of 10,000 rpm, and a tool changer with 20 positions. The machine offers a table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information. Blsdpfxjyca I Ss Afxsl • Operating hours: 17,641 h • Table size: 790 x 560 mm • Rapid traverse: 30 m/min • Tool changer: 20 positions • Condition: Both machines are in good working condition Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,478 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D powerline, table load: 600 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It features a Siemens 840D control unit, a spindle speed of 10,000 rpm, and a tool changer with 20 positions. The table measures 790 x 560 mm with a maximum load of 600 kg. Rapid traverse rate is 30 m/min. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V vertical machining centre. Contact us for more information about this machine. Bsdeyca Npjpfx Afxoll • Operating hours: 19,478 h • Table size: 790 x 560 mm • Rapid traverse: 30 m/min • Tool changer: 20 positions • Condition: Both machines are in good working condition Technical Specification Taper Size SK 40

Condition: new, type of input current: DC, total width: 370 mm, total length: 180 mm, total height: 190 mm, input voltage: 230 V, rotational speed (max.): 5,300 rpm, overall weight: 10 kg, input frequency: 50 Hz, warranty duration: 12 months, power: 0.18 kW (0.24 HP), grinding diameter: 13 mm, Sharpening of drills with a diameter of 2 mm to 13 mm Bsdpfx Ajga T D Tsfxoll Adjustable angle: 90 and 135 degrees Grinding speed: 5300 rpm Grinding wheel: CBN 200 Motor: 230V/1Ph/180W Weight: 10 kg

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: 1540503266A, TECHNICAL DETAILS X axis: 635 mm Y-axis: 510 mm Bedjng Amvepfx Afxjll Z-axis: 460 mm Control: Heidenaihn İTNC 530 Number of tools: 30 Tool holder: SK 40 MACHINE DETAILS on request EQUIPMENT Direct path measuring system X,Y,Z Measuring probe Heidenhain TS640 Spindle conveyor Operating mode 4