Cut to length line

Demaq Format 2.0

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC Nwsdpjwp Rqfefx Akcof The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: new, Year of construction: 2025, BIEGEMASTER double bender - Model XBend 6.1,25 Effective length: 6400 mm Bending capacity Steel 400 N/mm²: 1.25 mm V2A 600 N/mm²: 1.00 mm Aluminum 190 N/mm²: 2.00 mm Clamping capacity (closed seam): 0.5 mm steel Number of uprights: 4 pieces Driven upper bending joints: 4 pieces Driven bending joints bottom: 4 pieces Incl. touchscreen CNC control with automatic depth stop Incl. electric shears BIEGEMASTER Up- and Down- Bending machine - model XBend 6.1,25 Working length: 6400 mm Bending capacity steel 400 N/mm²: 1.25 mm stainless steel 600 N/mm²: 1.00 mm aluminum 190 N/mm²: 2.00 mm Hemming capacity (closed hem): 0.5 mm steel Stands + Tension Arms: 4 pcs. Driven linkage joints upper beam: 4 pcs. Nwodpfevhc Dpox Akcsf Driven linkage joints down beam: 4 pcs. Incl. touchscreen control and automatic back-gauge Incl. electric cutter

Condition: new, Year of construction: 2026, CIDAN Machinery manufactures coil handling slit and cut-to-length lines that can be programmed and operated by skilled and non-skilled users alike. Our cut-to-length machines are all-in-one units built to withstand high-level production over the course of time while taking up as little space as possible. CIDAN Machinery provides many of their cutting-edge features as standard – straightening units, sheet guide for in-feeds, guillotine shears with hold down beam and double-edged blades, feeding units, foot pedals for remote feeding, and many more. In order to provide the absolute best technological options from around the globe, CIDAN Machinery has partnered Forstner Machinery, a world-wide leader in slit and cut-to-length machines Since 1960, Forstner has been developing and manufacturing machines for professional coil processing. Our partnership has provided us the opportunity to bring all of their best machines to you! - Sheet metal on coils saves money, reduces waste and frees up storage space. - We have the right solution for all levels of production. - Free up floor space with coil processing and increase your productivity and your profits. - The extensive range of Forstner products can be combined to make an efficient production facility based on your requirements, where parameters such as power, distance, time and access to material are decisive for fast and cost-effective production. - With our solutions you can easily process coils from 500 kilos up to 8 tons. Bigger coils mean fewer changeovers, less waste and a more efficient process. - How many different materials do you need readily accessible? Frequent changeovers? With a coil selector you keep eight different materials ready at the cut-to-length for far quicker changeovers. - With a well equipped cut-to-length in your production facility you will no longer need to cut strips in guillotine shears. Njdpfxsmfrgrj Akcowf - Do you sell sheets or do you want to recoil material in smaller coils? We have the right solution for you! - Rational coil handling cuts your lead times, frees up production space and reduces tied up capital in stocks.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, Spot Welding Machine Type KAP10 Nwedekwcbyopfx Akcof CE certified Operated: Pedestal Power at 50% ED 10kVA, Continuous power 7.1kVA Welding Capacity: 1.5+1.5mm steel sheet Transformer Construction: -Primary winding: Copper wire -Secondary winding: Copper flexible foil sheet -Core: Silicon steel EI core Mains Connection: 220V/400V (50Hz) Protection Fuse: 220V-40A / 380V-25A Power Level: 5 Arm Length: 500mm Arm Diameter: 40mm Electrodes: Adjustable electrode stroke Power Input Cable: 3m Protection Class: IP21 Space Requirement (W/L/H): 380mm x 1000mm x 1050mm Weight: 110Kg Warranty: 1 years (+10 years spare parts support)

Year of construction: 1976, condition: good (used), strip width: 300 - 1.350 mm strip thickness: 0,35 - 3 mm Nsdpebh Ubwefx Akcewf coil weight: 12,5 t mandrel Ø: 508 mm

Condition: excellent (used), CPM 2000 granulator, 90kW engine die diameter 410mm Nodpfswcdpnox Akcewf We have several pieces

Year of construction: 2004, condition: ready for operation (used), A fully automatic Kasto band saw system is available. Cutting range at 90°: round material: 530mm, square material: 530mm/530mm, flat material: 530mm/640mm, saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions X/Y/Z: approx. 5200mm/2700mm/2700mm, weight: approx. 6000kg. Including roller conveyors. Documentation available. On-site inspection is possible. Nodpfx Aov S E Edekcswf

Condition: reconditioned (used), functionality: fully functional, approx. 4.5 m long infeed and centering table Drive via chain from the feed motor Centers the logs in the middle of the rotor Debarking machine VK 26 4 main cutters 4 pre-cutters 30 KW main motor 11 KW feed unit non-driven extraction table Machine workshop checked Nwsdpeu Hmacefx Akcef Machine cleaned and repainted

Condition: new, table width 3000 mm table length 1500 mm burner heads 1 Control CNC feed 20.000 mm/min total power requirement 15 kVA dimensions of the machine ca. 4,5 x 2,5 m * Heavy machine bed with precision guides for quiet movement machine * A ball bearing cross carriage for height adjustment with 400mm vertical Hub * Thermal separation of the drive and cutting areas ensures the highest precision * Automatic height finding and torch height control during cutting * Torch holder with collision protection and automatic shutdown in the event of a collision * Installation or implementation of the machine using the plug & play method with a forklift, Ant or crane possible * 3-sided accessibility to cutting area through boom design Nwsdpfspm U U Njx Akcef SATOTEC suction table: The SATOTEC table system is characterized by a stable table construction max. cutting thickness of 150 mm. For cutting a workpiece thickness of 150 mm, oxyfuel cutting technology is required. The workpiece support frame has interchangeable ones placed at a 45° angle and 3 mm thick flat iron slats. The distance between the slats is 50 mm. Power source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, increase possible with ProPierce Technology * Marking, notching and punching, including coated metallic materials * Inverter power source with digitally controlled, fully electronic process flow * Integrated cooling with partially automated filling and emptying Gas control: Fully automatically controlled, processor-controlled plasma all-gas console Q- Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction TEKA EcoCube 5.5 kW Medium to be filtered: dry, fat-free or oil-free dust/smoke Filter area: 100 m² (4 cartridges of 25 m²) Filter cartridge: BIA M, Type Nano Degree of separation: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan performance: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz. Current consumption: 11.5 A Current type: 3Ph+N+PE Fan structure: on the system, including silencer duct bend, right side Motor control: frequency converter Noise level: 75dB(A) + max 10 dB(A) with cleaning pulse Intake port: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: Light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Locking hooks and toggle locks - Compressed air connection and condensate drain each mounted with one Bulkhead fitting - Compressed air connection with hose nozzle d=8mm - Provide the system with grounding bolts - Cable in UL version - EATON frequency converter on the left in the attached control cabinet

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units Nwsdsdfgg Iepfx Akcjf E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader