Recoiler - mandrel 12,5 t

FROEHLING

Condition: used, ROLLING MILL YOM: 2004, Re-Commissioning 2021 ROLL DIMENSION Roll Dimensions BU Roll – 480 mm Dia x 460mm Face Work Roll – 150mm Dia x 420 Face Speed: max. 700 M/min Back Up Roll Driven Main mill drive: 553 Kw DC Strip thickness range: 3mm – 0.07mm Strip width range: 250mm – 350mm Roll change station Rolling force: 2500KN Max. Strip tension: Gear 1: 320 – 3200kp Gear 2: 160 – 1600kp Max. coil weight: 5 tons Max. coil OD: 1600mm Coil ID: 400/500mm Controls: SPS S7 400 Shape control Roll bending AGC Fume exhaust system Gjdoz Irb Djpfx Al Ujbu PAY-OFF Ground level “L” shape coil car with hold down arm Uncoiler with snubber roll arm Uncoiler drive: Hydraulic motor Seekamp edge control unit 3-roll leveler stand with Peeler table + snubber roll, side guides and hydraulic strip clamp – NEW 2007 LEFT & RIGHT WINDERS Winder drive: 220kW DC (ea) Coil Stand / In-ground coil car Winder with hold down arm Vollmer shape roll with analog VMF 2000 Thickness measurement: Vollmer contact gauge + laser gauge Oil separation: 2 sets of rubbers + 1 set of oil separation rolls (felt) Edge guides + strip clamp 3x Metal oil separation rolls Oil filtration: Manufacturer: Achenbach Buschhuetten Type: Superstack YOM: 2003 Mounted production floor level

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 200,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm The machine was overhauled in 2024, Capacity : Plate width mm. 3500 Plate thickness mm. 140 Capacity chart in enclosed Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. -Planetary design with pre-pinch fully hydraulic -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Top roll mm. 950 Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. Godpjyzim Aefx Al Ujbu -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension see layout drw in enclosed

Year of construction: 1980, condition: good (used), 5 (7) rolls, Ø 160 mm Gbsdpfxednztwj Al Uou strip width: max. 1.750 mm strip thickness: 0,4 - 3 mm

Year of construction: 1991, condition: good (used), design: rotary shear strip width: 500 - 1.650 mm strip thickness 0,3 - 2 mm Godpfx Alegnyy To Usbu

Year of construction: 2010, condition: ready for operation (used), A Thalmann long folding machine with a touchscreen control system renewed in 2025 is available. Working width: 8200mm, usable width: 8000mm, max. sheet thickness: 3mm, max. upper beam opening: 150mm, bending beam width: 12mm, feed rail: 12mm. Documentation available. An on-site inspection is possible. Gsdpsy Tn N Hsfx Al Uobu

Year of construction: 1985, condition: good (used), strip width: 100 - 750 mm strip thickness: 0,5 - 4 mm coil weight: 10 t mandrel Ø: 406/508 mm Gbodod Ha Hbopfx Al Ueu

Year of construction: 1980, condition: used, strip width 120 - 300 mm Gbedsbidc Ujpfx Al Ueu strip thickness 1 - 5 mm reference material (tensile strength) 800 N/mm²

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Gedpfx Asi El Ucjl Uebu

Year of construction: 1980, condition: used, strip width 120 - 300 mm strip thickness 1 - 5 mm reference material (tensile strength) 800 N/mm² Gbedpelil Epefx Al Ueu

Condition: like new (used), functionality: fully functional, coil inner diameter: 508 mm, coil outer diameter: 2,000 mm, coil weight: 16,000 kg, coil width: 1,000 mm, product width (max.): 1,250 mm, year of last overhaul: 2022, Self-centering FLENDER recoiler + 2 self-centering FROHLING decoilers Coil set: TWO DECOILERS and ONE RECOILER Brand: - Frohling for decoilers - Flender for recoiler Completely overhauled and upgraded with AUTO-CENTERING and linear guides in 2022 (units were already in excellent condition, but lacked all accessories and the CPC auto-centering system) Gsdpfsu Hlaujx Al Ujbu Capacity: 16MT Coil ID: 508mm / OD: 2000mm Max strip width: 1100mm (modifiable to 1250mm) Max line speed: 240m/min Independent lubrication with filter and pump Supplied without motors and speed gearboxes Ready for any inspection at our warehouse in Rovereto (TN), Italy If you have any questions, do not hesitate to contact us. IF INTERESTED, PLEASE CONTACT US — WE WILL CERTAINLY REACH AN AGREEMENT.

Year of construction: 2005, condition: ready for operation (used), A lathe (Universal Turning Solution) is offered, control: Fanuc, tool turret: 12-station, tailstock, 3-jaw chuck. Tool setting arm: Renishaw HPRA. Inspection is possible by arrangement. Gbedpfxsx I Rpxj Al Uju

Condition: excellent (used), Year of construction: 2004, year of last overhaul: 2004, 4-Hi CRM Rolling Mill Head – Froehling Froehling is a renowned brand known for its reliability and robustness in the rolling mill industry. 4-Hi rolling mill head with bending and tension control. The following are its features: Manufacturer: FROEHLING (Germany) – Refurbished in 2004 Gbjdog Ryqkepfx Al Uju Material processed: Aluminum alloys – brass – copper – low-carbon steel Strip width: 282mm (300mm) Strip thickness: 0.15 – 2mm Coil dimensions: ID 400mm – OD 1500mm Maximum rolling speed: 400m/min Work rolls: Diameter 130mm – Face 340mm Back-up rolls: Diameter 390mm – Face 335mm Complete with: Uncoiler and coiler Many sets of spare work rolls and back-up rolls Sold EXWORKS, disassembled and loaded onto a truck. Ready for any inspection by a prospective buyer. For any questions, please do not hesitate to contact us. IF YOU ARE INTERESTED, PLEASE SUBMIT YOUR OFFER; WE ARE SURE WE CAN REACH AN AGREEMENT.