Autonomous Transport Vehicle

egemin Automation E'gv

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Ibedow Hz T Ejpfx Angjb

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes Iodetndpzopfx Angobb - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: like new (used), 4 x stainless steel pressure tanks, insulated, temperature-controlled, with agitator connection Technical data / dimensions Available quantity: 4 Volume: approx. 4325 liters Tank type: Pressure tank Condition: used Suitable for food: yes Design: upright Diameter inside: approx. 1,500 mm External diameter: approx. 1,700 mm Cylindrical height: approx. 2,000 mm Total height: approx. 3,684 mm Weight: approx. 1,400 kg Iedpfx Anotv Rm Sogebb Specific weight of the medium: 1.0 to/m³ Operating pressure: overpressure/underpressure Operating pressure: -1/+6 bar Test pressure: 7.5 bar Wall thickness bottom: approx. 8 mm Wall thickness top: approx. 12 mm Wall thickness jacket / cylinder: approx. 6 mm Ground clearance: approx. 700 mm Operating temperature: 150 degrees Celsius Material / composition Material inner jacket: V4A (1.4435) Material double jacket: V2A (1.4301) Feet material: Stainless steel Outer surface: Mirror polished Ra

Year of construction: 2015, condition: excellent (used), Reportedly very little used Plümat model BFL 851 automatic machine to fill and close flexible pre-sterilized IV-Bags under pharmaceutical conditions. Made in 2015, the line consists of frame with safety guard, manual bag feeding, printing station, automatic bag infeed, tube cutting station, filling station, tube welding station, tube cooling station, bag outfeed, control cabinet. The filler is a linear single lane system. The system is in compliance with GMP and FDA standards. Ibjdelhqndepfx Angjb - processable bag formats (2 tubes = free tube length 30 mm presealed with Vial stopper & 40 mm sealed by welding or open tube): 100 ml, 250 ml and 500 ml - capacity: 100 ml / 250 ml / 500 ml = 600 bags/hour - filling accuracy: 100 ml = ± 2.0 %, 250 ml = ±  1.0 % and 500 ml = ±  0.7 % - dosage range: 100 ml - 1000 ml - welding method used: heat contact welding - filling system: SIEMENS S7 including counter card with mass-flow measuring system and pneumatic filling valves - controller: SIEMENS S7 Microbox with Profibus DP and TP 1500 touch terminal - power supply: 5.5 kW, 230/380 V, 50 Hz - compressed air supply: approximately 700 l/min, min 6 - max 8 bar - cooling water supply: approximately 4 l/min, temperature 18-21°C - weight: approximately 1350 kg (net) and 1750 kg (gross) - dimensions: 4263 (length) x 1050 (width) x 2140 (height) mm

Condition: like new (used), Year of construction: 2017, Price from location dismantled, packed and loaded: Partial quantities can be purchased! We reserve the right to a minimum purchase! Ibodpfx Anem Dr U Sogeb Manufacturer: Profielnorm B.V. Type: storage platform Year of construction: 2017 Floor area: approx. 1440 m2 Platform load: for main and side corridor 500 kg/m2 for folding door 1000 kg/m2 Floor height (top edge of floor covering): 3.880 mm Bottom edge of beam: 3.530 mm Axle distance: according to drawing Platform covering: grid support Stairs: 6 pieces Folding door (automatic): 6 pieces Condition: very good Available: immediately Location: Hungary/Budapest Plan of the stage: upon request

Condition: like new (used), pressure: 2 bar, temperature: 131 °C, power: 45 kW (61.18 HP), usable tank capacity: 125 l, Homogenizer Mixer CML125 Key Data: • SYMEX CML125 • Working volume: 125 L • Anchor agitator with scrapers and flow breaker 19 ... 82 rpm • Homogenizer with reversible operation (homogenizing/pumping mode) 5 - 21 m/s • Circulation line • CIP (Cleaning in Place) • Lid hydraulically liftable • Control via touch display • Heating, cooling, vacuum, ... • New seals • Pharmaceutical version, but also suitable for cosmetics Media Supply: • Cooling water supply: approx. 1.5 m³/h at 3 bar • Cooling water for vacuum pump: approx. 0.3 m³/h at min. 2 bar • Compressed air: approx. 2000 L/min at 8 bar • Power supply: 3x400V at 50Hz; 45.0 kVA / 45.0 kW • Steam: 6-8 bar, 45 kg/h Ibedpfxsyf N H As Angob The machine is factory-refurbished and can be inspected. We provide full “turnkey” project management, including on-site installation and commissioning at your facility.

Year of construction: 1997, condition: excellent (used), PEWOPACK 450 SN is a stretchbander with electronic/pneumatic controls to produce single packs or muliple collations. It is designed for stacking of carton boxes and packing them into shrinking foil. Output max. 60 cart/min Folientyp: PE Width of foil 50 - 450 mm Foil thickness 0,025-0,100 mm Ibodpody U Auefx Angeb Diameter of the roll max. 300 mm

Condition: excellent (used), Year of construction: 2008, SSI Schäfer Roller Conveyor System The price already includes over €25,000 in dismantling costs. The 8 roller conveyors shown in the second image are not included in the delivery. Logistics Center - Conveyor Belts, Roller Conveyors & Spare Parts. Excluding peripheral equipment such as printers, scanners, binding machines, shelving, etc. Over 3 floors Year of manufacture 2008 Extensive documentation Iodpek Hz Dasfx Angsbb Further images, sketches, and videos are available; we will gladly send you a link upon request. The Schäfer roller conveyor system is a state-of-the-art conveyor system specifically designed for the efficient and precise movement of goods and products across multiple floors. With its robust construction and intelligent control system, the system offers a reliable and flexible solution for internal transport in production facilities, logistics centers, and warehouses. The roller conveyor system consists of a series of rollers arranged horizontally and vertically to ensure seamless movement of goods between different levels. By using individually adjustable rollers and various conveyor belt types, the system can be adapted to the specific requirements of each customer. The Schäfer roller conveyor system features intelligent controls that allow for precise monitoring and management of the transport process. The control system can automatically adjust various settings and operating modes to ensure optimal performance and seamless integration into existing production processes. The system is easy to install and maintain and can be easily adapted to different spatial and floor layouts. The Schäfer roller conveyor system offers a reliable and effective solution for the internal transport of goods and products across multiple floors, making it an ideal investment for companies looking to optimize their internal transport and increase productivity. Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs available upon request!

Year of construction: 2011, condition: excellent (used), We are offering a used SMC Carousel mini load system from the manufacturer SSI Schäfer for sale. Technical specifications: High-performance modular shelving system for small goods (mini-load), 68 container racks with 12 levels per carousel Ibedpfx Anjixl Sqegob Containers 600x400x310mm, weight 30kg (not included) 1040 transport units per hour Approx. 3,264 storage locations The entire system (mini-load, flow rack, sorting system) consists of 4 carousels Length per carousel approx. 15 m, height approx. 4.5 m Total area approx. 320 m2 Maximum travel speed 0.6 m/s Location of the machine: 89-600 Chojnice/Poland The machine has been disassembled, is stored in a dry place, and is ready for shipment. If you are interested, please contact us.

Year of construction: 2023, condition: ready for operation (used), Three identical transport vehicles available, year of manufacture: 2x 2021, 1x 2023. An on-site inspection is possible. Ijdpfxjzadlvs Angebb