Surface grinders ELB SWBDE 12 SA 1998

ELB-Schliff

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 52.362, input voltage: 400 V, Increased Sales Pressure – therefore, no minimum price & guaranteed sale to the highest bidder! TECHNICAL DETAILS Grinding length X-axis: 1,000 mm Grinding width Z-axis: 600 mm Grinding height Y-axis on worktable: 500 mm Grinding height Y-axis on magnetic chuck: 410 mm Table load capacity on worktable: 1,000 kg Table load capacity on magnetic chuck: 620 kg X-Axis Guide system: Linear guideways Lubrication: Grease, automatic Drive element: Ball screw Drive motor: AC servo motor, variable speed Measuring system: Absolute, rotary encoder Cgjdpfx Asy A Ipfjnwjt Resolution: 0.001 mm Travel: 1,190 mm Feed rate: 0.01 - 30 m/min Y-Axis Guide system: Linear guideways Lubrication: Grease, automatic Drive element: Ball screw Drive motor: AC servo motor, variable speed Measuring system: Absolute, rotary encoder Resolution: 0.001 mm Distance table top to spindle center: min. 150 mm Distance table top to spindle center: max. 700 mm Feed rate: max. 1,600 mm/min Grinding column material: Micro granite Z-Axis Guide system: Linear guideways Lubrication: Grease, automatic Drive element: Ball screw Drive motor: AC servo motor, variable speed Measuring system: Absolute, rotary encoder Resolution: 0.001 mm Travel: 600 mm Feed rate: max. 2,000 mm/min Max. grinding wheel diameter: 400 mm Max. grinding wheel width: 100 mm MACHINE DETAILS Dimensions & weight Dimensions (D x W x H): 2,685 x 3,840 x 2,755 mm Machine weight: 8,000 kg Type of input current: Alternating current (AC) Input voltage: 400 V Operating voltage: 400 V AC Frequency: 50 Hz Total connected load: 50 A Max. feed current: 22 A

Condition: excellent (used), Year of construction: 2017, operating hours: 6,473 h, functionality: fully functional, machine/vehicle number: 12780000173, DMG MORI NHX 5000 About the Machine: High-precision and reliable machine. Available immediately. Technical Data: - Control: Siemens 840D - Travel X-, Y-, Z-Axis: 730/730/880 mm - C-Axis Travel: 360° - Rotary Table Clamping Surface: 500x500 mm - Spindle Speed: 20-15,000 rpm - Tool Interface: SK40 - Tool Magazine with 60 positions - Pallet changer with 2 stations - Automation-ready Equipment: - Internal cooling, 70 bar with belt filter system - Work area rinsing - BLUM measuring probe - Rinse gun - Chip conveyor - Signal light - Handheld control device Inspection / test under power on site can be arranged by appointment. We are happy to offer you transport, installation, and commissioning at your location. Everything from a single source: We at Baumgärtner CNC GmbH specialize in: - Service - Maintenance - Overhauling Cgedpfx Asyhwpwonwst - Automation for DMG machines and other renowned manufacturers. We accompany you—from the machine purchase, through transport and installation, all the way to commissioning and ongoing maintenance or repair work. You can rely on us.

Condition: used, Year of construction: 1991, Technical details: grinding length: 600 mm grinding width: 375 mm workpiece height: 375 mm max. table load: 300 kg grinding range: 350 - 600 mm Table dimensions: 900 - 350 mm magnetic plate size: 600 x 350 mm dimensions of grinding wheel: 300 x 50 x76,2 mm mm total power requirement: 12 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,3 x 2,6 x 2,4 m dimension coolant device LxWxH: 0,8 x 0,8 x 0,8 m Cedpfxexu D Hus Anwogt -Longitudinal table stroke = 700mm -transverse travel of table = 800mm Coolant pump *

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 4,800 kg, ELB Perfekt 8 SPS, year of manufacture 1998, grinding area 800 x 400 mm, grinding wheel 300 x 50 mm, 4.3 kW spindle power, SPS control for automatic grinding cycle (roughing, finishing, sparking out, lifting), dresser mounted on spindle head with compensation. The machine is currently being overhauled by us: the grinding spindle is being newly fitted with bearings, the guideways are being hand-scraped. After the overhaul, the machine will meet the geometry of a new machine and is thus immediately ready for operation. Accessories: electro-permanent magnetic chuck 800 x 400 mm, water tank with automatic paper filter, partial enclosure. All functions are tested, and the machine can be demonstrated under power at our facility. We are also happy to handle installation and on-site training. Financing/leasing is no problem; we’d be happy to provide an offer! Cgjdjrpz Evspfx Anwjt

Condition: good (used), Year of construction: 2003, X 1740mm, Y 766mm, Z 660mm 10000 rpm Codjwyblzopfx Anwjgt Parts shown by hand not come.

Condition: good (used), Year of construction: 2003, ELB Rotary 40 NC-K rotary table surface grinding machine, table diameter 400 mm, grinding height 300 mm, year of manufacture 2003, ELN NC-K control, spindle power 4 kW, grinding wheel 300 x 50 x 76.2 mm, rotary table with magnetic chuck diameter 400 mm, full enclosure, coolant system with paper band filter, can be inspected under power, we are happy to take care of installation / training and subsequent on-site service! Financing/leasing is no problem, we are happy to provide an offer! Cgedeuiafuspfx Anwet

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 3,600 kg, ELB Perfekt 6, year of manufacture 2002, grinding area 600 x 400 mm, grinding wheel 300 x 50 mm, 4 kW spindle power, automatic grinding cycle, roughing, finishing, spark-out, lifting, dresser mounted on spindle head with compensation. The machine has been professionally overhauled by us and now meets the geometry of a new machine. The grinding spindle has new bearings. Accessories: electro-permanent magnetic clamping plate 600 x 400 mm, water tank with paper filter unit. All functions have been tested and the machine can be demonstrated under power at our facility. We are also happy to handle on-site installation and training, as well as future servicing. Financing/leasing is available; we will be pleased to provide an offer! Cjdpfoxdalfox Anwegt

Condition: used, Year of construction: 2009, greates pass round over bed 1050 mm dist. between centers 6000 mm centre height 520 mm turning length 4810 mm Cgsdpfxoygxy Us Anwot workpiece weight max. (main spindle) 6000 kg Maximum workpiece weight with steady rests 8000 kg max. torque on the spindle 12500 Nm number of spindle speeds 2,8-560 1/min feed per revolution 0,08-56 mm chuck diameter 630 mm Maximum travel distance of the longitudinal slide 4810 mm Maximum travel distance of the cross slide (suppor 530 mm Maximum travel distance of the tool slide (support 340 mm Tailstock quill diameter 150 mm total power requirement 31 kVA weight of the machine ca. 10500 kg dimensions of the machine ca. 7860 x 1970 x 1480 mm Equipment/accessories: -2 x face plates -3 jaw chucks -2 x steady rests -Multifix holder -Turning tools -Various tips -Technical documentation

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, grinding length: 500 mm, grinding width: 400 mm, ELB Smart Line S 5 STC, year of manufacture 2008, grinding area X/Y/Z: 500mm/400mm/475mm, grinding wheel dimensions: 300mm/50mm/76.2mm, table speed up to: 30m/min, max. table load: 400kg, spindle taper: 36mm, control: Siemens STC, magnetic chuck 500 x 250 mm (can be enlarged), incl. coolant tank with paper filter system, grinding spindle with new bearings, all functions checked, in very good condition. The machine can be inspected under power at our facility; test grinding is also possible. We are happy to handle installation/training at your site as well as ongoing service in the future. Cgsdpfx Anjr D R I Sjwot

Condition: good (used), Year of construction: 1990, functionality: fully functional, grinding length: 600 mm, grinding width: 375 mm, total height: 375 mm, Surface grinding machine (226600) ELB SWN 6 NC-K; SN: 196900887, Cedpfx Aney H Hhnswjgt Magnetic clamping table, 350 x 600 mm, travel X/Y/Z 600 x 375 x 375 mm, Maximum table load 300 kg, grinding wheel Ø 300/76.2 mm, recess on both sides, dressing device, Lach diamond, missing grain, dresser, type MK0, maximum speed range 3,000 rpm, power 3.7/4.5 kW, machine weight 3,500 kg, footprint L/W/H 2,750 x 2,250 x 2,400 mm, out of service

Condition: used, Year of construction: 2000, operating hours: 13,024 h, functionality: fully functional, machine/vehicle number: 14248, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heindenhain, spindle speed (max.): 16,000 rpm, operating hours of spindle: 12,420 h, coolant supply: 40 bar, spindle nose: HSK63, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C800V Used tool milling machine, year of manufacture 2000 HSK 63 (30 positions) Heidenhain TNC430 Internal cooling (rotary union should be replaced) Cgodpfxox Exxis Anwet Bellows of the cabin roof is defective The machine can be inspected under power by appointment. The machine is available for immediate delivery.

Condition: excellent (used), Year of construction: 1986, grinding length 800 mm Cjdpfx Aount Iusnwjgt grinding width 375 mm workpiece height 375 mm magnetic clamping plate, electical 900 x 300 mm spindle turning speed range 1500 - 3000 U/min table surface area 1550 x 370 mm table longitudinal travel 100 - 1000 mm max. workpiece weight 350 kg dimensions of grinding wheel 300 x 50 mm total power requirement 9 kW weight of the machine ca. 4,6 t dimensions of the machine ca. 4,0 x 2,3 x 2,6 m

Condition: used, ELB SW4 surface grinder Grinding length 400 mm Grinding width Cgodpeyzgdxsfx Anwjt 200 mm Workpiece height 300 mm Dimensions of grinding wheel 275 - 315 mm Magnetic plate size 400 x 200 mm Max. table load 200 kg Weight of the machine ca. 1,6 t Dimension machine approx. 1,55 x 1,45 x 2,20 m Complete with the coolant tank and documentations.

Year of construction: 2008, condition: ready for operation (used), Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible. Cgsdsuyk N Iopfx Anwot

Condition: used, Year of construction: 1996, grinding length 1.000 mm grinding width 550 mm workpiece height 400 mm table surface area 1.580 x 550 mm table load capacity 950 kg magnetic clamping plate 1.000 x 550 mm x-Travel 1.200 mm table feed 1 - 30 m/min vertical feeds: 1 - 300 mm/min z-axis 470 mm cross feed 1 - 2.000 mm/min dimensions of grinding wheel 400 x 100 x 127 mm grinding wheel speeds 1.500 - 3.500 U/min grinding spindle drive 11,00 kW total power requirement 23,00 kW weight of the machine ca. 7,50 t Cjdpjxx A Dmjfx Anwegt dimensions of the machine ca. 4,50 x 3,20 x H2,90 m Coolant system with coolant pump integrated in the hydraulic tank, exhauster.