Stationary exhaust system

ESTA DUSTEX F-288

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Fpedowgbw Ropfx Ahnjh Possible to offer with additional Weinig bundling system if needed.

Condition: good (used), Year of construction: 1972, Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -Manufacturer: Lödige, scissor lift table -Load capacity: 1000 kg -Platform: 3000 x 2000 mm -Dimension retracted: height 390 mm -Dimension extended: height 2000 mm -Hydraulic unit: Bauknecht 3 kW / 150 bar -Transport dimensions: 3000/2000/H390 mm Fpedsmghawepfx Ahnsh -Own weight: 2100 kg

Condition: used, Year of construction: 2018, machine/vehicle number: 519553, Central extraction system Höcker Polytechnik with rotary valve and/or dust bins.(Option: rotary valve instead of dust bins) Manufacturer: Höcker Polytechnik Type: Multistar JQ6/5 131/20717A Year of manufacture: 11/2018 Dust properties: Dust and chips Material throughput: Unknown Jet cleaning of filters Volume flow: Approx. 22,000 m³/h Disposal type: Open Clean air duct: Air recirculation Residual dust content: 0.1 mg/m³ based on dust. 1 piece Filter system, galvanized - Year of manufacture 11/2018 - Multistar JQ6/5 131/20717A - Filter area: approx. 131m² - Filter bags: 120 - Filter bag diameter: 170mm - Filter bag length: 2,070mm - Filter cleaning Air Jet, compressed air - Filter housing made of galvanized sheet steel - Inspection door, access ladder, standing platform - Tested pressure relief areas - Raw gas section as large expansion chamber - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, hot-dip galvanized. - Includes dry extinguishing line, C connection - *Optionally with 6 chip bins or large rotary valve*2 pieces Clean air fans DER 404/400/18.5-2 - Volume flow: 11,000 m³/h per fan - Directly driven fans - Galvanized sheet steel - Installed horizontally in Multistar series - Electrical power of each fan 18.5 kW - Total volume flow 22,000 m³/h - Total pressure increase: 4,600 Pa 1 piece Pipe components Air recirculation - Including galvanized ducts - Must be supplemented for a new location . Fedpfxjya Idvj Ahnoph 1 piece Control cabinet With PLC Siemens S7-1200 Dustproof sheet steel standard housing control cabinet as wall cabinet, built and completely wired, in accordance with VDE regulations 0100, 0113, and DIN 57113. The scope of delivery includes all components required for control components and the circuit igned for: · Jet cleaning control · Control of 2 fans · 6 automatic start-up of the fans when the machine starts · Pressure monitoring indicator light · 3 control butterfly valves · Rotary valve controlDimensions: - Length: 3,960 mm - Width: 3,380 mm - Height: 5,900 mm (may vary depending on equipment) Electrical connection value: - approx. 38 kW - 400 V/50 Hz - Control voltage 230 V AC/24 V DC Location at warehouse

Condition: used, Year of construction: 2023, Used system Year of manufacture: 2023 Condition: As new, system has only a few operating hours Equipment and technical specifications: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and wood chips - Fan: 2 x 7.5 kW - Airflow rate: 10,000 m³/h at - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs à 2.50 m - BIA category M, electrically conductive Fjdjyk I U Aspfx Ahneph - Filter area: 77.6 m² - Filter surface load: 129 m³/(m²x h) - Filter cleaning: AL-KO OPTI JET® - Pressure relief panels: 0.84 m² (bursting discs) - Lower section with discharge chute and rotary valve Dry discharge with C-coupling Comprising: - ECO JET DUO 6 UPPER PART, 2 x 7.5 kW: Clean air filter system; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; Incl. pressure relief panels and dry discharge with C-coupling; without filters and control; Incl. pressure sensors - ECO JET DUO 6 ZWR XL - 1100 MM: Intermediate ring for expansion or unit height increase with 2 inlet connections for suction nozzles - Base frame with discharge chute and integrated rotary valve 960/1 FG: For disposal of chips via on-site transport fan into existing silo or similar Transport pipe DN 200 mm, approx. 1,260 mm long under rotary valve, connection to transport pipe to be provided by buyer Rotary valve certified according to ATEX Directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (Unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor output: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class / mounting: IP 54 / B3 Insulation class: F Speed: 41 rpm Discharge capacity*: 15,744 l/h* Number of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pcs required Filter BIA category 'M' – electrically conductive; 2.50 m long, incl. support cages; 77.6 m² filter area - Inlet nozzle 400 mm: with backdraft damper in rectangular duct - ECO JET backdraft damper 910x346x500 - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency inverter (FU) up to max. 37 kW; corresponding performance module and controls as well as the frequency inverter are included in the basic unit; the FU is installed in the control cabinet Cascade control with FU handover: Fan 1 operates on the frequency inverter; when threshold is reached, switches to mains operation; Fan 2 takes over FU and regulates as needed; Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault warning Display of fault message as plain text on display and collective fault indicator on the door Manual discharge start via display button Start filter cleaning via differential pressure Manual filter cleaning start via button Post-cleaning Fire monitoring

Condition: good (used), Year of construction: 2000, Weinig A5 outfeed with automatic board stacker. -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately Fjdpsxftvaefx Ahneph -Pack size max 6100mm x 1200mm x 1200mm(high)

Condition: ready for operation (used), Year of construction: 2011, number of axes: 3, This 3-axis Weeke Optimat BHP Vantage 24M was manufactured in 2011. A robust CNC processing center, it offers precision and efficiency for diverse machining tasks. Consider the opportunity to buy this Weeke Optimat BHP Vantage 24M CNC processing center. Contact us for more information. Fodpex D D Ttsfx Ahnjph

Condition: new, With air flow rates of up to 22,000 m³/h, the stationary compact filter systems of the ECO JET series offer a wide range of applications. They are the ideal extraction solution for machines in various manufacturing sectors and industries, including larger processing machines. Eligible for BAFA funding according to Module 4. ECO JET series systems are equipped with fans arranged on the clean air side, which draw the dust- and chip-laden air towards the filter unit. In the most powerful DUO models, two fans are connected in parallel. A flange at the filter unit inlet enables the connection of custom duct diameters. The aerodynamically optimized airflow in the separation chamber allows coarse particles to be separated directly, without reaching the filter bags. Residual dust collected by the filters is automatically cleaned by the AL-KO OPTI JET® filter cleaning system, with the separated material discharged into mobile collection containers located beneath the filter. Applications: - Extraction from production machines, machining centers, and ductwork systems with multiple suction points - Direct extraction for continuous operation - In sectors such as wood processing, joineries, carpentry workshops, furniture manufacturing, plastics manufacturing and processing, paper production, orthopedic industry, and many more Advantages: - Wide selection of standard extraction systems with numerous customer-specific customization and options Fodpfjwwtuijx Ahneph - Consistently high suction performance thanks to integrated pre-separator and AL-KO OPTI JET filter cleaning system - Heating cost savings, as 100% recirculation operation is possible in many cases - Small footprint due to compact design - Suitable for indoor and outdoor installation - Available in ATEX-compliant versions - Extensive range of accessories and numerous options for individual device configuration - Eligible for BAFA funding according to Module 4

Year of construction: 2013, condition: ready for operation (used), I sell the spraying automat Renojava yr. 2013 Working width 80mm Element thickness up to 80mm Fedpfx Aheh Ibivjnsph Feeding bands length: 1,60 + 2,60m Technology break 200mm / Element length min. from 300mm. Total length: 4,40m Ring arm system for guns from each side Pump included. Feeding system with motors. Good condition. Available immediately.

Condition: excellent (used), F.lli Ferrari extraction system Chip and sawdust extraction with fan, control cabinet and rotary airlock valve. Fan: F.lli Ferrari, year of manufacture 2002. Fan motor: 22 kW. Fan capacity approx. 22,000 m3/h. Fpsdpfjyh I A Eex Ahnoh The extraction unit is equipped with bag filters and a bag cleaning system. External dimensions: width 385 cm, depth 240 cm, height 580 cm.

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) Fedexb U Txepfx Ahnoph -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.