VERTICAL DRILLING MACHINE FOR GLASS

EXPOGLASS ® Priam

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 16 A, actuation type: electric, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, overall weight: 1,900 kg, Equipment: documentation/manual, EXPOGLASS® PRIAM is a modern vertical glass drilling machine equipped with electronic feed, automatic drill length measurement, and glass thickness measurement. The machine ensures high precision, smooth operation, and clean edges even with large hole diameters. Polish product – a solid, easy-to-use construction designed for intensive daily work in glass workshops. Technical data Dusdpfeh Ek H Sox Anwst Length - 4440 mm Height - 2793 mm Width - 1487 mm Weight - 1900 kg Maximum distance of drilling center to bottom of the glass - 1000 mm Glass thickness - 2 to 20 mm Communication - touchscreen 7” and analogue buttons Spindle feed (motion) - automatic Spindle feed steering - electronic (not pneumatic) Setting of loading bar height - electronic Spindle rotation speed - 700 RPM do 2800 RPM Measurement of the drill position - automatic Drills changing mode - lowering of the white top and blocking spindle rotation Setting of the drilling depth - electronic (calculated by a controller) Horizontal positioning - two row of bumpers with measure (manual) Glass clamping system - pneumatical Hole chamfering mode - installed, electronically driven Automatic glass thickness - installed, electronically Measuring Automatic drill bit diameter - installed, electronically Measuring Drilling in series - installed

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 10 cup wheels vertical glass edging machine with variable angle 0-45° actual running meters : 260.000 min. glass size : 40 x 40 mm Duedpjw U Ddusfx Anwot glass thikness : 3 - 55 mm speed : 0,4 - 6 m/min. voltage : 400 V 50 Hz 39 A weight : 4600 Kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, height adjustment type: electric, actuation type: electric, rotational speed (max.): 2,800 rpm, rotational speed (min.): 700 rpm, total length: 4,440 mm, total height: 2,720 mm, overall weight: 1,900 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Glass drilling machine – Year of manufacture: 2020 Technical condition: very good | Ready for operation For sale: Glass drilling machine from 2020, maintained in very good technical condition. The machine is fully operational, runs stably, and ensures high drilling precision – ready for immediate integration into production. Key information: Dedpfx Asyn Sk Nsnwout - Usage: approx. 39,000 drilled holes - Feed: electronic (precise operation control) - Maximum rail descent (Y-axis): 1050 mm - Spindles: replaced with a new type - Operation: smooth, no play - Condition: no additional investment required – ready for work - The machine has undergone regular servicing. Additional options: - Machine commissioning at the customer’s site by authorized service (paid option) - Operator training available The machine can be inspected before purchase – we offer a trial drilling on-site.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 16 A, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, overall weight: 1,900 kg, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS Dedped S Uhqefx Anwout MODEL: PRIAM BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Year of construction: 2026, condition: new, BEFARD XP602 Glass Mounting Vacuum Suction Cup • Maximum load capacity 600 kg • 8 suction cups • Two-speed vacuum system • Remote control for vacuum release • Battery powered • Manual rotation 360 degrees • Lock at every 90-degree rotation • Full vertical and horizontal adjustment Additional options: Duodjiauz Njpfx Anwst • HS spacers • spare battery • transport trolley • pallet box Other models available gripper with a load capacity of 300 kg, 450 kg, 800 kg, 900 kg, 1000 kg Available in the selected color

Condition: used, Year of construction: 2004, functionality: fully functional, Glass thickness: 3 ÷ 40 mm Minimum operating height of sanding belt: 50 mm Minimum size of workpiece: 70x70 mm Duedpfx Asxyv Rionwet Installed power: 20 kW Minimum compressed air pressure: 6 bar Max compressed air consumption: 25 Nlt/min Length: 7043 mm Width: 1890 mm Height: 2300 mm Conveyor load capacity: 200 kg/m Weight: 2800 kg Processing speed: 0.5 ÷ 5 m/min Water tank capacity: 720 l Additional technical data can be provided electronically.

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: Djdpfx Anewyda Uswout • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: used, Year of construction: 2015, Vertical CNC machining center with 3 controlled axes and exceptional Y-axis machining capacity. It is equipped with a vacuum table clamping system that holds plates and sheets with the help of vacuum. This solution is particularly effective when machining thin parts that are difficult to fix using conventional clamping systems. The machining center is equipped with a set of valves that allow you to turn on or off different table zones, thus concentrating the vacuum in a specific area and optimizing the clamping of small components. Possibility of performing interpolated milling and drilling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Tekna provides user-friendly software that can be operated by both experienced CNC programmers and less experienced users. The TKE 783 is a machining center with 3 controlled axes for interpolated drilling and milling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Technical specifications: Model: Tekna TKE783 Dodpfxov D A Ims Anwsut Year of manufacture: 2015 Power: 29 kW Dimensions of the machining table: 2010 x 6300 mm Weight: 4842 kg Speed: X axis 70 m/min; Y axis 55 m/min; Z axis 30 m/min Software: Windows, Embedded, Teach-in software CAD/CAM 2D NC TOOL Made in: Italy Other: aluminum milling up to 4 mm was worked on. The machine is connected, you can see how it works and test it in Estonia. It will be ready for transportation in April-May. If you have any additional questions, we will be happy to answer them.

Condition: good (used), fuel type: diesel, Year of construction: 1997, operating hours: 10,314 h, machine/vehicle number: JEE0055599, CASE 621 B excavator no. JEE0055599 1997 Djdpfx Anjvxh R Aewout 93kw 10314h

Condition: new, machine/vehicle number: 3, empty load weight: 9,500 kg, maximum load weight: 29,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,550 mm, loading space height: 850 mm, suspension: air, tire size: 245.70 r 17.5, color: white, Year of construction: 2022, Equipment: ABS, factory new ceylan trailer semi-trailers ready for delivery, electro hydraulic double ramps, wideners, rud hooks, 10m platform, h from ground 85cm, also grated ramps, ebs, 3 axles with 1st liftable and 3rd steer-guarantee -CONCESSIONARY INTERDRIVE SRL-PARMA Dsdpfx Aehzaq Rsnwout