Plate rolling machines Fasti 109-30-3, 3040x3mm

Fasti

Condition: used, Max. cutting length: 2540 mm Itedeyvgcispfx Ab Tod Max. sheet thickness: 6 mm steel Motor-adjustable rear stop (2 speeds) up to 1000 mm with display Side stops and table extensions cutting length limitation Cutting edge lighting Weight approx. 5500 kg

Condition: ready for operation (used), sheet width 1540 mm plate thickness 5.00 mm pre-bending 4.25 - 6.00 mm diameter of upper rolls 150 mm voltage 400 V total power requirement 4.0 kW Iodpfx Aeyuzcbsb Tjtd weight of the machine ca. 1630 kg range L-W-H 2520 x 890 x 1070 mm Features: - Robust electric three-roll bending machine - Drive via spur gear brake motor + reduction gear - Asymmetrical roll arrangement - Electric adjustment of the rear roll * with automatic/electric shut-off * Minimum/maximum travel adjustment possible - Rotating control panel - Swiveling upper roll - Conical bends by tilting the lower and rear rolls - 1x freely movable double foot switch * Right/left rotation of the rolls - Manual adjustment of the lower roll via handwheel - With analog position indicator - Electric safety device (cable) - Original operating instructions * Further technical data for steel 400 N/mm²: - 1.5 x upper roll diameter with bending .. 4.25 mm - 1.5 x upper roll diameter without bending .. 5.00 mm - 5 x upper roll diameter with Bending angle .. 6.00 mm

Condition: good (used), Year of construction: 2001, functionality: fully functional, Manufacturer Fasti GmbH Itedovzwrbopfx Ab Tsd Model ERD 65 B Connected load 0.9 kW

Condition: used, Max. bending length: 1020 mm Iodpsyrrg Sjfx Ab Tetd Max. sheet thickness: 1.5 mm steel Weight: approx. 300 kg

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Iodpfx Abshmmfkj Tjtd Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Swivel bending machine FASTI Type 2095-25-2,5 Serial no. 94 295 004 Year of construction 1994 effective length 2540 mm max. sheet thickness 2.5 mm Stroke of upper beam 380 mm Motor power bending beam 2.2 kW Mains connection 400 Volt, 50 Hz - NC control FASTImatic FM100 - One-piece 135° pointed rail - Controlled backgauge - Continuous stop rail - controlled bending angle via control unit - electric foot switch weight 3000 kg Itodpfx Aettc Uajb Ted good condition

Condition: used, Max. cutting length: 1040 mm Max. sheet thickness: 4 mm steel Manual backgauge up to 550 mm Side stops and table extensions Itjdsyrnvispfx Ab Tsd knife sharpened 1700 kg

Condition: good (used), motorized limit stop behind foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Iedpfx Abehtq N Ne Tstd

Condition: good (used), Hydraulic guillotine shear (used) Manufacturer: Fasti Model: TCHE 25/6 Max. cutting length: 2540 mm Max. sheet thickness (ST 40): 6.0 mm Distance between uprights: 2540 mm Backgauge travel: 0 – 750 mm Hold-downs: 16 units Motor power: 12 kW Machine weight: 5400 kg Required space: Width 3000 mm, Depth 2700 mm, Height 1900 mm Features: Foot switch, angle gauge, front support arms, motorized backgauge, cutting edge illumination, sheet lifting device. The machine is in very well-maintained condition and ready for immediate use. Forklift available, free loading onto truck. Affordable shipping possible. Location: 48477 Hörstel. Ijdpfx Ajyrr E Usb Tjtd

Condition: good (used), Hydraulic guillotine shear (used) Manufacturer: Fasti Type: TCHE 254 Max. cutting length: 2540 mm Max. sheet thickness (ST 45): 4.0 mm Distance between side frames: 2540 mm Backgauge adjustable: 0 – 1000 mm Hold-downs: 14 units Motor power: 6.5 kW Machine weight: 3400 kg Required floor space: Width 2950 mm, Depth 2700 mm, Height 1900 mm Foot switch Angle gauge Front support arms Motorized backgauge Cutting edge illumination Digital display for backgauge The machine is in very well-maintained condition and ready for immediate use Forklift on site, free loading onto truck Inexpensive shipping possible Machine location: 48477 Hörstel Itodjyrhfwopfx Ab Ted