Climatic test chamber

Feutron 3702/06

Condition: good (used), Year of construction: 2008, 1 used vertical machining center Manufacturer: Deckel Maho Model: DMU 80 monoblock Year of manufacture: 2008 Control: ITNC 530 Technical specifications X travel: 980 mm Y travel: 630 mm Z travel: 630 mm Control: iTNC 530 Total power requirement: 10 / 15 kW Machine weight approx.: 9.5 t Space requirements approx.: 4*4*2.5 m Fpsdpexa Eudjfx Agdob Additional information Equipment: Electronic handwheel Operation mode 4 Manual swivel milling head Motor spindle 12,000 rpm SK 40 / Clamping DIN 69872 32-tool magazine Fixed table 1250 x 700 mm Chip conveyor Coolant system

Condition: ready for operation (used), travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, Equipment: chip conveyor, documentation/manual, 4-axis machining center, year 2016, control: Siemens 840D Solution Line, NC rotary table 360 x 0.001 degrees, 2-fold pallet changer, pallet size: 500 x 630 mm, 60-fold tool changer, HSK63 tool holder, IKZ, Knoll PF 210/1750 gravity belt filter, Hyfra TKR 30 coolant temperature control, Knoll 450 K-1 scraper belt conveyor, infrared measuring probe Fpodpfx Agerx Sh Aedob

Condition: ready for operation (used), Feature Specification Rotor Size φ ≈ 370 mm × 1500 mm Fpodsw A I Tdepfx Agdsb Rotor Speed 80–125 rpm Knife Count Up to 123 (V‑rotor) Power 75–90 kW (electromech); up to 110 kW Infeed Opening 1500 × 1890 mm Weight ~6400 kg Output Particle Size 15–100 mm (exchangeable screen) Drive & Bearings WAP gearbox, sealed bearings Control Siemens PLC Discharge Belt / screw / suction available Applications Plastics, packaging, wood, fibre, etc.

Condition: used, machine/vehicle number: 13292, Rotor diameter: 368 mm Rotor width: 1500 mm Rotor blades: 82 Stator blades: 1 row Drive motor: 90 kW Fpedpfowmg Sgex Agdeb

Condition: like new (used), Rotary vane bacuum pump in oil bath. Available in stock. Completely overhauled pump. With warranty. Nominal flow: 300 m3 / h at 50Hz. Final vacuum: 0,1 mbar abs. Any clarification, do not hesitate to contact us. Fodpfeftzzgex Agdopb

Condition: new, Year of construction: 2026, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,200 mm, 5-axis gantry machining center EDEL CYPORT CP 4030 Travels X/Y/Z: 4,000 / 3,000 / 1,200 mm Gantry passage Y/Z: 3.276 / 1.405 mm Rapid Traverse X/Y/Z 30/30/15 m/min Fedpfoir Iczox Agdspb 2-axis-NC-swivel head M-Series of German manufacturer Cytec: Swivel range A-axis : +/-110° Swivel range C-axis +/- 360° Powerful milling spindle of German manufacturer Cytec: Tool taper: HSK-A100 Speed: 12,000 rpm Power: 42/53 kW (100%/40% ED) Torque: 200/253 Nm (100%/40% ED) Control: HEIDENHAIN TNC 640 HEIDENHAIN wireless electronic hand wheel incl. charging station 5-axis path control DXF-converter CAD-Viewer KinematicsOPT Energy efficiency certificate Remote Service Tool magazine: Number of pockets: 64 pcs. HSK-A100 max. tool diameter: 105/150 mm max. tool length: 300 mm max. tool weight: 8 kg Coolant system Manufacturer: KNOLL Tank volume: 1,600 L external coolant supply: 20 bar internal coolant supply: 50 bar Paper band filter Spray gun Chip conveyor Coolant-airblast-changeover Oil-Mist extration unit Work piece measuring, Touch probe BLUM TC 60 - radio controlled Tool measuring BLUM LaserControl Micro Single NT Working area coverage Safety light sensors Documentation CE-certification Made in Germany

Condition: excellent (used), Heraeus Vötsch climatic test chamber Here we offer a Heraeus Vötsch climatic test chamber. Heraeus Vötsch climatic test chamber with humidity (water cooled) Test chamber dimensions: Width 800 mm x depth 800 mm x height 950 mm Housing dimensions: Width 1090 mm x depth 1960 mm x height 1995 mm Characteristic values for temperature tests: Temperature range: -45°C to +180°C temporal ± 0.1 to ± 0.5 K spatially ± 0.5 to ± 1.5 K Temperature change rate according to IEC 60068-3-5 heating: 4.0 K/min cooling: 3.0 K/min Characteristic values for climatic tests: Temperature range: -45°C to +180°C Temperature deviation in steady state, according to IEC 60068-3-5 depending on test room temperature Temperature range: - 10°C to +95°C temporal ± 0.1 to ± 0.3 K Fpodemt Du Tepfx Agdjb spatially ± 0.5 to ± 1.0 K Humidity range: 10 % to 98 % r. h. Humidity deviation temporal +1 to ±3 Electrical connection: Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 7,8 kW Rated current: 15,0 A Refrigerant R452A Test chamber capacity: approx. 600 liters Weight: approx. 620 kg net Type: VC³ 4060 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment.Condition: gebraucht / usedScope of delivery: (See picture) Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 retort heat treatment furnace - As good as new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts incl. TECHNICAL DATA Plant type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour. Working temperature: ≤ 1100 °C , ≤ 1050 °C in vacuum. Control constancy: ± 2 K Temperature homogeneity: ± 6 K in the range from 600 °C to 1150 °C at the end of the settling period Control voltage: 230 VAC / 24 VDC Working space furnace: 360 x 400 mm Loading: ≤ 50 kg Heating: three-zone Pressure: ≤ 350 mbar Final pressure vacuum when cold: < 5 * 10-5 mbar with clean, dry furnace. Fjdpfx Aeiryyaogdspb Installation area: 900 x 1900 x 3000 mm Total plant weight approx.: 1500 kg Sound pressure level: < 70 dB We do not assume any liability for the correctness, completeness and topicality of the information.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, 5-axis gantry machining center CYPORT CP 6830 Travels X/Y/Z: 6,800 / 3,000 / 1,200 mm Gantry passage Y/Z: 3,276 / 1,405 mm Rapid Traverse X/Y/Z 30/30/30m/min 2-axis-NC-swivel head M-Series of German manufacturer Cytec: Swivel range A-axis : +/-110° Swivel range C-axis +/- 360° Powerful milling spindle of German manufacturer Cytec: Tool taper: HSK-A100 Speed: 8,000 rpm Power: 50/64 kW (100%/40% DC) Torque: 240/300 Nm (100%/40% DC) Control: HEIDENHAIN TNC 530 (Heidenhain TNC 640 / 7 possible) 5-axis path control DXF-converter CAD-Viewer KinematicsOPT Energy efficiency certificate Remote Service Tool magazine: Number of pockets: 39 pcs. HSK-A63 max. tool diameter: 125/175 mm Fodpfx Aeigrikegdspb max. tool length: 300 mm max. tool weight: 15 kg Coolant system Manufacturer: KNOLL Tank volume: 1,600 L external coolant supply: 20 bar internal coolant supply: 50 bar Paper band filter, Spray gun Chip conveyor Coolant-airblast-changeover Work piece measuring system: Touch probe BLUM TC 60 - radio controlled Working area coverage Safety light sensors Documentation CE-certification Made in Germany

Condition: reconditioned (used), Year of construction: 2008, Partially overhauled milling machine Axes: 5 Control: Siemens 840 Solutionline Spindle: SK 40 / 18,000 rpm Equipment: Fedpfjv Acgyox Agdjpb 3D Quick Set for kinematic measurement, Heidenhain 3D measuring probe Handwheel Internal cooling system 40 bar Chip tray (no chip conveyor)