Retort heat treatment furnace

MUT 360/400-1150

Condition: good (used), Year of construction: 1971, machine/vehicle number: 170119003210A0, Offer 25217 Technical data: - Groove width: 3 to 36 mm Bwjdpfewu Suvjx Anxsp - Max. groove length: 340 mm - Bore diameter: 10 to 350 mm - Feed rate: 0.01 - 0.22 mm - Cutting speed: 2 - 10 m/min - Return speed: 20 m/min - Max. pulling force: 1.5 t - Max. workpiece weight: 3 t - Table size: 350 x 450 mm - Working / operating height: 1050 mm - Drive: 400 V / 3 kW - Space requirement: approx. W 900 x H 1250 x D 700 mm - Weight: approx. 900 kg - Extensive accessories as shown

Condition: new, Year of construction: 2024, ✅ New & in stock ✅ Up to 100mm branch thickness ✅ Shipping possible SCHORR WOOD CHIPPER 100MM BRANCH THICKNESS RR100THX Powerful wood chipper for branches up to 10cm in diameter. Extremely robust and compact. Bwedot Ivaaepfx Anxsp -- 196cc petrol engine with 5.6 HP -- Self-feeding no additional pressure necessary -- 360° ejection -- Compact size -- High user-friendliness -- Extremely robust and reliable EQUIPMENT / FEATURES POWERFUL LIGHTWEIGHT The SCHORR RR100THX wood chipper impresses with its practical size, which maximizes flexibility when used in different locations. Thanks to its width of just 600 mm, the shredder fits easily through any standard door and can therefore also be used in places that are difficult to access (e.g. gardens). With an operating weight of 93 kg in combination with the two tubeless wheels, the shredder is easy to store and transport, even in confined spaces. RELIABLE IN EVERY RESPECT The high-quality cutting unit of the shredder has 2 blades and 1 counter blade made of high-strength steel. The material of the blades is designed for the special requirements of the shredder, it is extremely resistant and at the same time not brittle. The low feed height of 910 mm makes it easier to feed in the wood and thanks to the large feed hopper, you save time by processing large quantities quickly. HIGH LEVEL OF SAFETY AND EASE OF USE Important safety features such as an emergency stop bar on the handle or the central emergency stop button maximize work safety. The integrated catch guard in the feed hopper prevents small pieces of wood from flying out of the hopper. The motor is also equipped with a low oil sensor. This prevents the engine from starting if the oil level is too low to avoid serious engine damage. The ergonomic design of the controls and easy access to maintenance areas complete the practicality of the wood chipper. LOW FUEL CONSUMPTION A major advantage of the efficient engine is the low fuel consumption and the associated reduction in environmental impact. The 196 cc engine also produces less noise than larger machines, making this shredder ideal for residential areas. Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR100THX Drive type: V-belt 13x860Li Max. Branch thickness: 100mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter blade Own weight: 93kg Basic dimensions Total length: 1450mm Overall width: 600mm Total height: 1080mm Discharge angle: 360º Engine capacity Displacement: 196ccm Power max: 4,1kW / 5,6PS Starter: Reversing starter Our expert team will be happy to answer any questions you may have about the SCHORR HOLZHÄCKSLER 100MM ASTSTÄRKE RR100THX. We look forward to hearing from you and assisting you with advice. Are the purchase costs for a wood chipper too high for you? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing offers, which you can take advantage of, please contact us.

Year of construction: 2025, condition: new, Automated pallet dispenser is the backbone of your automation processes. Loaded with up to 10 euro pallets (1200x800 or 1200x1200), it removes the need to prepare each pallet manually, saving time and reducing strain on employees. Instead, the unit dispenses pallets with a push of a button, or a pre-set algorithm onto a motorised roller conveyor, which transports them for further processing. PD-10 can be used in line with various palletising solutions. Bsdshbg Uxopfx Anxowp Fits up to 10 euro pallets Loaded up with a forklift Reduces physical strain Increases efficiency

Condition: excellent (used), Year of construction: 2004, year of last overhaul: 2004, 4-Hi CRM Rolling Mill Head – Froehling Froehling is a renowned brand known for its reliability and robustness in the rolling mill industry. 4-Hi rolling mill head with bending and tension control. The following are its features: Manufacturer: FROEHLING (Germany) – Refurbished in 2004 Material processed: Aluminum alloys – brass – copper – low-carbon steel Strip width: 282mm (300mm) Strip thickness: 0.15 – 2mm Coil dimensions: ID 400mm – OD 1500mm Maximum rolling speed: 400m/min Work rolls: Diameter 130mm – Face 340mm Back-up rolls: Diameter 390mm – Face 335mm Complete with: Uncoiler and coiler Bwsdsg Ryqkopfx Anxop Many sets of spare work rolls and back-up rolls Sold EXWORKS, disassembled and loaded onto a truck. Ready for any inspection by a prospective buyer. For any questions, please do not hesitate to contact us. IF YOU ARE INTERESTED, PLEASE SUBMIT YOUR OFFER; WE ARE SURE WE CAN REACH AN AGREEMENT.

Condition: good (used), Year of construction: 2020, functionality: fully functional, cooling capacity: 20 kW (27.19 HP), type of input current: three-phase, type of cooling: air, overall weight: 281 kg, input voltage: 400 V, total width: 600 mm, total length: 1,600 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 20 kW (27.19 HP), Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 20 AIR EVO HP 20 kW/20 kW Cooling capacity: 20 kW / 5.69 tons (12/7 — 35°C) Heating capacity: 20 kW / 5.69 tons (40/45 —7°C) Year of manufacture: 2020 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi Electric ANB42FPJMT (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump EBARA matrix 5-2t Dimensions: 1.6x0.6x1.8 m. Weight: 281 kg. Working hours: 2330 h. Condition: Good CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT Bwedswp Dq Sopfx Anxsp The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Bwedpfx Aer Nfvmonxep Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Year of construction: 2023, condition: like new (used), functionality: fully functional, Our compact extruder model EX20-25d Bwsdpfx Ansq R Tkwoxep Manufacturer: PMH GmbH Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Year of construction: 2006, condition: good (used), Agfa chiller (cooling system) for Agfa and Screen CTP systems. Inspected and tested. Bwodpfxsdtr A Tj Anxjp

Year of construction: 1999, condition: used, System: Used decanter / centrifuge Manufacturer: Baker & Hughes Model: full coat screw centrifuge Type: CP 3054 Year of construction: 1999 Hoechstzul. Speed: 3132 I/min Inner diameter drum: 552 mm Drum wall thickness: 14.5 mm Engine: 2 electric motors, new Auger motor Control Panel: no Frequency converter: Yes Bwsdpfscbukrsx Anxjp Documentation: Yes Maintenance: regularly twice a year In operation: By early 2015 Buying and renting possible.

Condition: used, Year of construction: 1989, pressure 250 t stroke 20 - 190 mm no. of strokes 24 / 48 /min throat 500 mm passage to the back 1000 mm dayligth 615 mm table surface area 1400 x 880 mm hole in the table 450/500 mm table height over floor 800 mm ram surface 1380 x 620 mm ram adjustment 125 mm power requirement 29,0 kW Weight 27,0 t dimensions of the machine ca. 2,0 x 2,6 x 4,1 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor with 2 speeds, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, motoric centralized lubrication, two-hand operation Bwsdpfx Aevut Ncjnxjp can be inspected in running function in our warehouse