Measuring and control panel with cabinet base

GARANT 430190

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 Lhsdpfx Aju Nc Riekqjn spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Ledpfxsuiy Ngs Akqshn Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Year of construction: 2014, condition: excellent (used), DMG PH 150-8 . year of construction 2014 . with pallets . Lhedpfjin Dklex Akqjn Touch screen . plant in very good condition .

Condition: ready for operation (used), Year of construction: 2010, controller manufacturer: MAZATROL, controller model: MATRIX, This 3-axis Mazak QTN 250 M X 1000 horizontal turning machine was manufactured in 2010. If you are looking to get high quality turning capabilities consider the Mazak QTN 250 M X 1000 machine we have for sale. Contact us for more information. Ledpjyalpcjfx Akqohn Machine Benefits Technical Machine Benefits • Max. Capacity: 640 • X-axis rapid traverse speed: 36000 / z-axis rapid feed speed: 36000 / c-axis rapid feed speed: 555 • Machinable diameter: 380 • Maximum machinable length: 600 • Bar capacity: 76 • Self-centring dimensions (main spindle): 250 • Stroke: 1000/cone: cm 4 • Coolant tank: 300 l

Year of construction: 1999, condition: like new (used), functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Type: horizontal broaching machine Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence - the machine has an integrated coolant system - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Lhodpfxor A Hcbs Akqen Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G551-1586, travel distance X-axis: 800 mm, travel distance Y-axis: 770 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, position of the milling head: Horizontal, table load: 1,000 kg, overall weight: 22 kg, input voltage: 400 V, Equipment: documentation/manual, GROB G550 / G551 5-axis machining center with TM167 tool magazine and Schuler LoadMaster LMC 900 Price upon request Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end-users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany or the EU • Inclusion of a dual-use statement in the purchase agreement (legally required) Sales/Transfer conditions: • Dismantling, removal, and transport are the responsibility of and at the risk of the buyer. • The buyer is responsible for personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. Technical data Manufacturer: GROB-WERKE GmbH & Co. KG Model: G550 / G551-1586 Machine type: 5-axis universal machining center Year of construction: 2015 Control system: Siemens Sinumerik 840D Axes: 5 Tool holder: HSK-A63 Spindle speed: 16,000 min⁻¹ Spindle power: 35 kW Spindle hours: approx. 19,125 h X-axis: 800 mm Y-axis: 770 mm Z-axis: 500 mm Measuring probe: Renishaw IKZ: 70 bar Tool management Lhjdjzxf Hkspfx Akqen GROB TM167 additional tool magazine Year of construction: 2021 167 additional tool positions Total number of tool positions: 287 Fully integrated into the system Automation Schuler Automation LoadMaster LMC 900 Year of construction: 2015 Linear pallet changing system 9 pallet positions Beckhoff/TwinCAT control System is fully functional and ready for operation Condition The production cell is in good condition and has been in continuous operation. The machine has a relatively low number of spindle hours and is equipped with a TM167 additional magazine installed in 2021. According to the operator, there are no known defects. The system is ideally suited for the automated production of demanding 5-axis components in the following areas: Mechanical engineering Automotive industry Aerospace Medical technology Tool and mold making Scope of supply GROB G550 / G551 machining center GROB TM167 tool additional magazine Schuler LoadMaster LMC 900 9 pallets Documentation Inspection Inspection possible by appointment. The machine can be inspected while powered on. Location: Germany / Waiblingen If you are interested, we look forward to hearing from you so that we can discuss the further details. Keywords GROB G550, GROB G551, 5-axis machining center, Siemens 840D, TM167, tool magazine, Schuler LoadMaster, LMC900, pallet automation, HSK63, CNC machining center, 5 Axis Machining Center.

Condition: used, Year of construction: 1998, grinding length 2000 mm grinding width 600 mm total power requirement 17 kW weight of the machine ca. 10 t Lodsv S Ip Ejpfx Akqohn

Condition: good (used), Year of construction: 2003, All parts shown by hand not come. Ledsyyniaspfx Akqjhn Technical details are shown on picture.

Condition: good (used), Year of construction: 2005, Mazak Integrex 300 - III turning/milling center, year of manufacture 2005, CNC control 640 MT, travel X/Y/Z 630/230/1,585 mm, B axis NC swiveling head -30°/+195°, Lsdjyzfr Iepfx Akqohn tool magazine with 80 positions Capto, main spindle 26 kW, C axis 0.001°, tailstock MK 5, high-pressure coolant system 70 bar with filtration unit, Tooleye, 5-axis simultaneous machining package, Mazak Monitoring System, chip conveyor,

Condition: ready for operation (used), Rotation diameter over bed/slide: 560mm/300mm, max. workpiece weight between centers: 2500kg, max. workpiece weight in chuck: 800kg, center width: 1000mm, machining length: 980mm, feed: 8m/min, bed width: 433mm, tool positions: 8, tool holder: VDI40. Machine dimensions X/Y/Z: approx. 3000mm/2300mm/1800mm, weight: approx. 3700kg, control: Siemens 810D Manual Turn. Documentation available. On-site inspection is possible. Ledpfx Ajwynvtekqehn