Etikettierer für selbstklebende Etikettetten Gernep

Gernep Labetta 8-480-3 SK

Condition: used, Year of construction: 2019, Overview The fill level inspection was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Techn. details: Capacity: 50,000 bph Inspection via gamma ray emitter Krones Checkmat with push-off belt Ncsdpfx Abol Hxnis Ten

Condition: used, Year of construction: 2018, Overview  The Gruber AFD6 is a filling machine for bottles and party KEGs that was produced by the German manufacturer Gruber in 2018 and has an operating time of 725 hours. The machine is available immediately. Technical details Output 800 bph (at 0.33l) 750 bph (at 0.5l) 600 bph (with 1.0l) 400 bph (for 2.0l) 240 bph (with 5.0l party KEG) Output varies depending on CO2 content and beer temperature (in practice, 1,000 bph could be achieved at 0.33l) Long tube filler with 6 filling points Fully automated filling process Single or double CO2 flushing Siemens S7 control system with touch panel Operating hours: 725 hours Nsdpfju I Hr Ujx Ab Tecn

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Nedsl Hx Adjpfx Ab Tjcn

Condition: used, Year of construction: 2012, functionality: fully functional, Used Sacmi 3 LT Bag in Box Line: Carton former: Sacmi Packaging EC 25 – 2012 Ultra – Clean filler: Sacmi Pakim FB-2 – 2007 Carton closer: Sacmi Pakim C.R.C.E. bib – 2007 Handle applicator: Sacmi Pakim – 2007 Speed on 3 LT format: 1,200 pieces/hour Format included: 3 liters Accident prevention protections Carton erector melting unit – MELER Micron 4/2 120P – 2012 Carton closing melting unit – MELER Micron 4/2 100P – 2007 Carton belts included Code: OP 10 Used Sacmi 3 LT Bag in Box line from 2012 is a machine designed for the production of cardboard packages and for filling 3-liter containers. The line includes a Sacmi Packaging EC 25 carton erector, a Sacmi Pakim FB-2 Ultra – Clean filler, and a Sacmi Pakim C.R.C.E. carton closing unit. bib. In addition, there is a Sacmi Pakim handle applicator. This equipment has a production speed of 1,200 pieces per hour for the 3-liter format. Safety devices are included to ensure a safe working environment. The system is equipped with a melting unit for the MELER Micron 4/2 120P carton erector and a melting unit for the MELER Micron 4/2 100P carton sealer. Carton belts are also included for operation. Njdpfjv Dadlox Ab Tscn

Condition: used, Year of construction: 2004, Overview The filler was manufactured in 2004. It was used in a brewery in France during the last years. The complete brewery was sold to a company in Belgium. The filler is not needed anymore and therefore for sale. It can be used for filling beer and soft drinks. The machine is disassembled and properly stored. Tech Specs: Capacity: 2500 b/h at a Volume of 0,75 l/b 3300 b/h at a Volume of 0,33 l/b 20 rinsing nozzles 20 filling valves 3 capping elements Formats: 0,33l; 0,75l Working direction: clockwise Njdpol Hxl Ijfx Ab Tecn

Condition: used, Working width 410 mm Length of the planing table 1450 mm Number of knives 4 St. Motor output 4 kW Dimensions (L/W/H) 2650x850x1100 mm weight of the machine ca. 750 kg Surface planer F 410 N Ncedpfjwzmu Dsx Ab Tjn ----- Technical manufacturer's description: Planing width: 410 mm Total table length: 2600 mm Table height: 855 mm Feed table length: 1450 mm Aluminum planing fence swivels up to 45° Planing fence dimensions: 1100 x 170 mm 4-knife planing shaft diameter: 120 mm Knife shaft speed: 5000 rpm Motor power: 4 kW TERSA monobloc one-way reversible cutterhead SCM dressing protection device integrated in machine stand 120 mm diameter extraction nozzle Manual star-delta switch Motor protection switch, undervoltage release Lockable main switch Automatic motor brake Pivoting auxiliary fence ----- Price of the above machine on request! ----- (technical data according to manufacturer - without guarantee!) All prices quoted are net and subject to VAT.

Condition: used, Year of construction: 1995, Overview The bottle washer "Sirio 7" from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar Njdpfxjtrbrqe Ab Tscn

Condition: used, Year of construction: 2009, Model: Contiroll Nodpfxswu Rf He Ab Tocn Year of construction: 2009 Speed: 18,000 BPH Counterclockwise directions Automatic head adjustment with program from panel 15 plates Mechanical cam plate movement 1 station Type of labelling of the stations: roll-fed Machine dimensions: 2000 mm x 2000 mm x 2500 mm (h) Safety protections Code: EA 650

Condition: used, Year of construction: 2022, Overview  The GAI filler was manufactured in 2022 by the Italian company GAI. This machine is used to fill sparkling wine into cylindrical bottles from 0,2L until 1,5L. It is equipped with a rinser (air or water) 16 nozzles, 24 electropneumatic filling valves and 3 capping turrets (3 capping heads on each turret). Each capping turret has its own cap feeding and alimentation system. Dedusting unit for the corks is installed. Integrated overpressure roof with prefilters and absolute filters. This machine is sold with an automatic CIP and 2 pallets of microfiltration Win&tech. The machine is still in production and can be visited. The condition of the machine is like new, as it has only 200 working hours. Technical details  Working direction: left to right Capacity: 0,187ml - 4500bph 4°C & 15°C 0,375ml - 4500bph 4°C & 15°C 0,750ml - 4000bph 4°C &  2900bph 15°C 1500ml - 2000bph 4°C & 1500bph 15°C Currently set up for: Glass Bottles: 0,187ml 0,375ml 0,750ml 1500ml  Caps/Corks Cork (boucheuse liège) Screw cap Decorative Cap (Champagne style) Incl. CIP and wine filtration Ncedpfjv Aag Dox Ab Tjn

Condition: used, Year of construction: 2013, Overview The bottle washer was manufactured by the German company Krones in 2013 and put into operation in 2014. It has been serviced annually. In addition, tenside lye cleaning and spare parts can still be purchased. DISMANTLING INCLUDED. Technical data  Capacity: 66,000 bph Maximum bottle diameter 69 mm Set up for the following formats:  Vichy 0,33l Long-Neck 0,33l Long-Neck 0,5l NRW 0,5l  Steinie 0,33l Ncedol Hx Enepfx Ab Tjn