Milling spindles

Grecon Dimter

Condition: excellent (used), Year of construction: 1999, 1. Milling Head Debarker Baljer Zembrod - Year of manufacture 1999 - Heavy-duty cross conveyor for round timber, 4-strand - Debarking carriage - Milling head - Planing head for clean finishing Iodpfxewtpmgs Agzetr - Root reducer - Operator cabin - Rails - Discharge boxes

Condition: ready for operation (used), For turning plates, slices or trays up to 250 mm Ø Machine with vacuum clamping Isdpfx Agjrh Hntszetr

Condition: used, Year of construction: 2010, Milling machines Travel distance X: 760 mm Travel distance Y :510 mm Travel distance Z: 610 mm HSC-machines Itjdpfxev D U Apj Agzsr Number of axis: 3 milling machine / machining center Control: Hurco WinMax spindle chuck: SK - A40 spindle revolutions: 12000 rpm table size X: 1020 mm table size Y: 508 mm max. workpiece weight: 1350 kg tool changer: 24 - time input Power : 13,5 kW Torque: 214 Nm Rapid traverse: 35 m/min spindle cooling chip conveyor

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 Itodpfx Asqpdkcjgzor - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour

Condition: new, Year of construction: 2023, _____Bale dimensions 1.20 x 1.00 - 1.50 mMax. bale weight 1,100 kgTotal length: 4.55 metersTotal height: 2.51 metersLoading system: Side loading arm with clamping deviceWrapping table: 4 beltsBale guide rollers on the wrapping table: 2 x adjustable Film end sensor, wrapping process stops when the film runs out or breaksVT 30 terminalFully automatic film cutter1 EW and 1 pressureless return or 1 DWSpecial equipmentMagazine for 4 film rolls,Storage location:null Itedpfx Ageki Einezsr

Condition: good (used), Year of construction: 2008, functionality: fully functional, heating capacity: 50 kW (67.98 HP), Wood chip system with 50 kW heating capacity already disassembled complete with boiler, stocker unit, and discharge system Iedjv Ngq Aepfx Agzstr

Condition: used, Year of construction: 1980, No. 3192 Four-sided planing machine WEINIG U 17 A Used, year of construction 1980, machine available from February 2025 Machine still in operation 6 spindles Arrangement of spindles bottom - right - left - top - bottom - bottom Working width 170 mm (with a tool flight circle of 125 mm) Working height 120 mm (with a tool flight circle of 125 mm) Itjdpfx Aovkhccjgzsr Joining spindle 4 HP All other spindles 5.5 HP Feed 2 or 3 HP Speed of the work spindles 6000 rpm Work spindles Ø 40 mm Smallest flying circle Ø of the moulder spindles 100 mm Largest flying circle Ø of the moulder spindles 180 mm Continuous feed, infinitely variable 6 - 18 m/min Transport roller Ø (hardened) 140 mm Transport roller width 50 mm Adjustment range of feed table and joining ruler right 10 mm Adjustment range of vertical spindles under table 40 mm Adjustment range of the horizontal spindles (axial) 30 mm Dressing table length 2 m Sale on behalf of customer, ex location Upper Austria, without disassembly, without transport and assembly Errors in description and price excepted Disassembly, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: good (used), Year of construction: 2000, Schroeder Mosaic Press 160mm. Isdpfx Aer Iyvbegzotr Gluing patterns - brick / English pattern plate 640x274mm and halves 640x137mm glued in 6 variants: - single brick offset 50% - double brick offset 50 % - triple brick offset 50 % - single brick offset 25 % - double brick offset 25 % - triple brick offset 25 %

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total height: 2,070 mm, total length: 2,000 mm, total width: 1,200 mm, overall weight: 600 kg, Comafer K100, output 100 kg/h. 6mm pellets, chips with 8-12% moisture content. Material is ground by a mill to the appropriate fraction (5.5 kW), then fed by a screw conveyor into a ring die pellet mill (7.5 kW) where it is compacted. The process is fully automatic, controlled from an electrical control cabinet. Very high pellet quality. Isdpfx Aew Hnglogzstr

Condition: used, Year of construction: 2021, Number of spindles 5 St. Working width 250 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ----- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Itodpjwgwmnofx Agzjr Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled...