Rotary indexing table polishing machine

HAU

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1000 (maximum part processing length 1000 mm, respectively), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm Nodpfx Aow Avptokqedc The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Year of construction: 2002, condition: used, Balpe SAS model: 9PL/20 Nedpob Uanqofx Akqedc serial: 88 Stainless, 9 electrically heated angled plate with, 200mm diameter, adjustable temperature.

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1500 (maximum part processing length 1500 mm), with 1 PES/3 polishing station and a control cabinet. The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Ndedpfx Akow Au A Esqec Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.

Condition: used, machine/vehicle number: HR6-1200, Used rotary indexing table polishing machine HR6-1200 Manufacturer: Hau Rotary indexing table with 6 working spindles and 3 polishing stations equipped with high-pressure guns, 5.5 kW motors, Pneumatic clamping with Schunk PZN 100 clamping grippers, Schunk distributor. Nodpfx Ajyntrhskqodc Control cabinet. Three rotary table polishing machines are available.

Year of construction: 2014, condition: good (used), Multivac R145 Thermoformer The Multivac R145 Thermoformer is a versatile and efficient packaging machine, designed for high-speed and precision packaging in various industries such as food and medical sectors. Built in 2014, it offers advanced technology and customizable tooling to meet a wide range of packaging needs. Will be shipped with 1 tool, but we can arrange new tools for this R145 for very comparative prices. Tool 1x4: Packing Size 80x195 mm. Manufacturer:Multivac Model:R145 Year:2014 Production hours: 2.451 Power Supply:400/230V / 50 Hz Power:12,5 kW Njdpfxoyz Shij Akqsdc Machine dimensions (LxWxH): 4.600x1.050x1.900 mm Film width: 360 mm Max. cut off length: 195 mm Vacuum Pump: Busch 250m3/h Machine weight: 1.000 kg.

Condition: used, Year of construction: 1976, We are selling a used rotary indexing table with four polishing stations. This rotary table is also equipped with four rotary unions. The polishing stations are designed for polishing wheels with a maximum diameter of 500 mm. The stations feature automatic feed. The drive power of the polishing stations is 5.5 kW. If you have any further questions, please feel free to contact us! Nodpfsxxv D Hsx Akqedc

Condition: good (used), Used rotary indexing table polishing machine Manufacturer: Hau Rotary indexing table with 6 work spindles and 3 polishing stations with oscillation and high-pressure guns, Ndodoqmfv Sepfx Akqsc 5.5 kW motors, gripper clamping system, switch cabinet

Year of construction: 1979, condition: used, pressure 160 t Nodolp Uz Rjpfx Akqedc distance between columns 850 mm stroke 400 mm ram surface 800x700 mm 300 mm pressure of ejector 20 t table surface area 800x700 mm total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 1800x1800x4200 m

Condition: good (used), Indexing table HAU RK 4-800, 4 work piece spindles, max. 3 polishing units, more details and inspection on request. Pictuer shows RK 6/800 Ndedjv Na Sepfx Akqjc

Condition: good (used), Indexing table HAU RK 6-1200, 6 work piece spindles and 4 polishing units type PES, 11 kW each, max. width polishing wheel 300 mm, incl. oscilation, electr. driven hight adjustment, liquide compound feeding system (spray guns + pressure tank, control cabinet Ndodpfx Ae R Ecgekqsc Price and additional information on request.

Condition: new, pressure 8,5 kN stroke 40 mm Nsdsfv Awajpfx Akqsdc throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm

Year of construction: 1970, condition: used, engine: 380 V, 5,5 kW space needed: 1200 x 1600 x 3200 mm Ndedpfxs Sxmio Akqsc weight: 1200 kg

Year of construction: 1976, condition: ready for operation (used), machine/vehicle number: 12321, Hydraulic unit, consisting of an oil tank with a drive motor mounted on it with a flanged hydraulic pump and 2 valve blocks above it Ndjdjghgtrepfx Akqoc 1. valve block: Operating pressure 160 bar Delivery rate 20 l / min 2. valve block: Operating pressure 319 bar Drive motor KATT: 220/380 V, 1420 rpm, 2.2 kW Required space: 700 x 620 x 1050 mm Weight: including hydraulic oil (90 l) 193 kg

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 540 h, pressing force: 1,000 t, stroke length: 800 mm, reverse speed: 150 mm/s, table width: 2,300 mm, table length: 3,000 mm, total length: 4,500 mm, total width: 3,500 mm, total height: 6,000 mm, overall weight: 101,000 kg, working height: 1,300 mm, working range: 1,300 mm, Hydraulic press 1000t - in very good condition, used for stamping first series parts from progressive tools -we bought this maschine as new for 340 000 EUR in year 2019 Nedjyilh Ispfx Akqsdc

Year of construction: 1970, condition: used, Headstock can be manually adjusted transversely: 600 mm Spindle can be manually adjusted in height on the column: 1200 mm Hydraulic automatic vertical movement: 900 mm Ndsdpob N Dgmjfx Akqjc Hydraulic automatic transverse movement: 200 mm Maximum distance between table and spindle mounting (long spindle): 600 mm Drive motor: 380 V, 2800 rpm, 5.5 kW Table diameter: 550 mm Space requirement: 1600 x 1200 x 3200 mm Weight approx.: 1.2 t Hydraulic unit: 2.2 kW; space requirement: 800 x 800 x 1200 mm; weight approx.: 300 kg