Belt Grinding Machine

HBM 100 x 1220

Condition: excellent (used), Maximum machinable diameter above the bed: 575 mm Maximum machinable diameter above the slide: 525 mm Maximum machinable diameter above the small cross slide: 300 mm Distance between centers: 2000 mm Spindle passage diameter: 51 mm Number of spindle speeds: 18 Spindle speed range: 32 to 2500 rpm Bed width: 400 mm Ncsdpfjwlgdyex Ahfsu Maximum cross slide travel: 305 mm Maximum upper slide travel: 140 mm Maximum tailstock travel: 150 mm Overall dimensions: 3405 x 1175 x 1345 mm Machine weight: 2200 kg

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Extreme plasma nitrided version with scale Nsdpfx Ahexab Rnefjcu - Sidewall with diagonal grid - Including 4x basic equipment

Condition: used, Year of construction: 1996, Vollmer CHC 260 Ncsdpfx Aeyuc Ifjhfju Year of manufacture: 1996

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Ncjdpfxow Rm Sao Ahfeu Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: new, sheet width 1270 mm Nedpfx Ahoupxcgjfscu plate thickness 2,0 mm distance between columns 1300 mm daylight opening 48 mm 135 ° total power requirement Handbetrieben weight of the machine ca. 0,4 t dimensions of the machine ca. 1,6 x 0,9 x 1,2 m Segment-bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.

Condition: good (used), Year of construction: 1995, Offer 24315 Technical data: - Sanding belt dimensions 2000 x 100 mm - Surface sanding opening 400 x 100 mm Nsdpfxot Stfhj Ahfecu - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment via hand wheels - Sanding belt speed 30 m/sec. - Contact wheel / sanding roll Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - 10 contact grinding rollers approx. Ø 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm

Condition: new, width of the strips 150 mm band length 2000 mm band speed 30 - 34 m/sec total power requirement 4 kW weight of the machine ca. 100 Kg dimensions of the machine ca. 1,2 x 0,5 x 0,85 m Nsdpfxoirwwpj Ahfjcu

Condition: new, Special offer for in-stock items! Only while supplies last! Price ex warehouse, plus VAT. Belt sander: Bernardo Type/Model: MS 75 x 2000 S-2 Condition: New Belt dimensions: 75 x 2000 mm Belt speed: 14.5 / 29 m/s Contact wheel Ø x W: 200 / 80 mm Platen table: 460 x 75 mm Dust extraction connection Ø: 100 mm Ncjdpfx Aeb Hhkgshfju Motor output power S1 100%: 2.4 / 3.0 kW Motor input power S6 40%: 3.0 / 4.0 kW Voltage: 400 V Dimensions (L x W x H): 1080 x 440 x 1000 mm Weight approx.: 67 kg New item in original packaging.

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts Ncsdpjxfrv Eefx Ahfsu are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Condition: new, functionality: fully functional, Year of construction: 2024, control type: manual, working width: 1,270 mm, folding beam adjustment: 46 mm, bending angle (max.): 135 °, sheet thickness (max.): 2 mm, back gauge adjustment: manual, back gauge: 760 mm, overall weight: 380 kg, total length: 1,600 mm, total width: 850 mm, total height: 1,175 mm, Equipment: documentation/manual, Top and bottom blades removable in segments Includes manual backstop PNEUMATIC CYLINDER!!! Max. bending capacity over the entire working length ----- 2 mm Ncodsga T A Iepfx Ahfsu Max. working length ----- 1270 mm Max. opening width ----- 46 mm Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 250 | 275 mm Max. bending angle ----- 0 - 135 degrees Weight ----- 380 KG Width ----- 1600 mm Depth ----- 850 mm Height ----- 1175 mm