Tool grinding machine

Hispano Suiza Albula

Condition: refurbished (used), Year of construction: 2010, load capacity: 200 kg, arm reach: 2,400 mm, As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. We can help you with: - Welding - Cutting - Machine Feeding - Palletising - Depalletising - Marble Processing Redpeq Dpxdofx Aglen - Apgant Machine Feeding and Metal Bending - And many other projects Brand: KUKA Model: KR200-3 Comp Condition: Refurbished with 1 year of warranty Version: V5.6.12 Year: 2010 Control Cabin: KRC2 ed 05 Rated Payload: 200kg Access Distance: 2400mm Included: Manipulator + Control Cabin + All Wiring Sets + Teach Pendant +1 Hertz Spindle Motor (New) + Delta Spindle (Set with the Mechanical System) + Tool Changer Table Not Included: 7th Axis, Engineering Design and Consultancy Shipping: NOT included in the price Payment: 100% payment before collection

Year of construction: 1960, condition: used, Surface grinder with magnet 250 x 135 400 Volt power 1,8 kw Redsiuz Tgepfx Aglen

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 500 mm turning diameter over support: 280 mm turning length: 1500 mm centre distance: 1500 mm Rsdeu Ixznopfx Aglon turning dia. in gap: 730 mm spindle bore of work spindle: 65 mm range of revolution per miute: 25-1250 / 32-1600 / 36-1800 - 18 step U/min feed:: 0,05 - 8,5 mm rapid motion - x-axis: 4 m/min rapid motion - y-axis: 1,26 m/min tailstock quill taper MT: 5 tailstock quill adjustment:: 200 mm total power requirement: ca. 8,2 kW weight of the machine ca.: 2,5 t dimension machine xH: 3,2 x 1,3 x 1,5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 - 2.8 mm (clutch end position switching not functional, manual switch-off necessary) Top slide with 4-fold tool holder Steel plate Ø 705mm with offset threaded holes *

Condition: used, turning diameter / mm turning length / mm swing diameter over bed slide / mm Technical data - Model 230 DIMENSIONS Centre height on the bed: 230 mm Spacing between centres:1600mm Bed width: 360 mm Largest turning Ø: on the bed: 465 mm on the carriage: 278 mm on fixed steady rest: 200 mm on travelling steady rest: 160 mm CROWNING Width of the crank: 300 mm Distance between face plate edge and offset: 150 mm Largest turning Ø on the offset: 690 mm SPINDLE Ø of front bearing (inside): 110 mm Ø of rear bearing (inside): 95 mm Ø of hole: 77 mm Mounting Type - Cam Lock: 6" Internal spindle taper - taper: 1 : 20 Spindle taper - C. M. - N.: 5 Speed ranges: Slow feed - rev. 1': 15÷1000 Normal feed - rev. 1': 22÷1500 Fast feed - rev. 1': 30÷2000 FEEDS (without gear change)-N.: 108 Longitudinal feed range at revs. : 0.04÷4 mm Transverse feed range at revolution: 0.02÷2 mm Rodpowz Rywjfx Aglon Lead screw - Ø: 40 mm Lead screw pitch: 12 mm THREAD (without gear change) Metric - N. 54 to: 0.5÷28 mm Module - N. 54 to Module: 0.25÷14 Whitworth - N. 54 to Wt. x 1": 56÷1 Diametral Pitch - N. 54 to D.P.: 112÷2 Inch - N. 54 to Inch: 1/32 ÷ 13 3/4" SPINDLE PIT Quill Ø: 75 mm Quill barrel: 220 mm Quill taper - vices N. 5 POWER Main motor - HP: 10 Pump motor - HP: 0.25 WEIGHT approx. - kg 2000-2220 2530-2720 2920 ON REQUEST Main motor - HP

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Condition: Used Year of manufacture: 2001 Operating hours: 56,376 Spindle hours: 26,451 Technical specifications: Travel X/Y/Z: 600 / 700 / 600 mm Motor power: 15 kW (40% duty cycle); 10 kW (100% duty cycle) Spindle speed: 18,000 rpm Tool holder: SK 40 Magazine positions SK 40: 60 Equipment: - 3D path control MillPlus IT - Horizontal double-arm tool changer - Automatic swivel milling head - Rotating safety glass - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B axis SK 40 (only in combination with SK 40 motor spindle) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Operating mode 4 extended manual intervention Rjdpfxsu Rnluj Aglen - Rinse gun with pump - Tool breakage control SK 40 mechanical version, range: 63...310 mm / +/- 3 mm - Intermittent chip conveyor operation - Internal coolant supply switchable from 40 bar to 80 bar

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Siemens, controller model: 828D + Shopmill, total height: 2,560 mm, total length: 2,350 mm, total width: 2,160 mm, table width: 550 mm, table length: 1,000 mm, table load: 800 kg, overall weight: 4,300 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 700 mm, spindle nose: SK 40, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 76 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Travel X/Y/Z: 850/550/550 mm Redpfx Agjdkh Tielon Max. speed range: 10000 rpm AC drive power (40 %): 13.5 kW (Siemens) Vertical tool magazine for 30 tools Tool holder: SK 40 Rapid traverse X/Y/Z: 36/36/36 m/min Including equipment among others: Preparation for 4th & 5th axis Robust roller guides in all axes Spindle cooling system (oil cooling) Fast double-arm gripper with preselection and vertical magazine with 30 tool positions Hinged belt chip conveyor Coolant through the spindle with 20 bar high-pressure pump Blast air through the spindle Coolant gun Movable electronic handwheel On request we can offer this machine including a suitable rotary table for 4th & 5th axis. Please indicate this in your inquiry!

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Rsdpfeq U R T Njx Agljn Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: not inspected (used), Year of construction: 2008, Parker Hannifin Instron Hydraulic power unit Year of construction 2008 Rsdpfx Agoq Nyw Aolsn Power 90KW Main fuse 200A Working pressure 285bar flow rate 165L/min Tank 850 litres The offer is aimed exclusively at traders within the meaning of § 14 BGB No sale to private individuals!

Condition: good (used), GMN flat grinding machine offered. Type: MPSE 200 Table: 140 x 260 mm Included coolant pump Machine height; 150 cm Rsdpfodypzxsx Aglon For more information call us or send an e-mail.

Condition: used, Year of construction: 1996, cutting diameter 260 mm saw band length 2910 mm cutting width 0,9 mm capacity 45 degrees: round 200 mm capacity 90 degrees: square 260 x 260 mm capacity 90 degrees: flat 300 x 260 mm capacity 60 degrees: round 165 mm capacity 60 degrees: square 150 x 150 mm capacity 60 degrees: flat 160 x 120 mm cutting speed 35 / 70 m/min dimensions of saw-band 2910 x 27 x 0,9 mm height of material-table 950 mm Redjtqql Tepfx Agljn total power requirement 2,0 kW weight of the machine ca. 400 kg dimensions of machine L x W x H 1,70 x 0,90 x 1,67 Accessories: coolant