Wheel Balancing Machine

HOFMANN NG-1

Condition: good (used), Year of construction: 1996, Test specimen diameter: 320 mm Test specimen width: 140 mm Test specimen weight: 20 kg Test mandrel length: 178 mm Test mandrel pin diameter: 15 mm Weight: 4.7 kg Hedpsv E D Nuefx Agzsg Space required: 420 x 280 x 350 mm

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH Hjdpjh Rdwxsfx Agzsg *Depending on the filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: used, workpiece weight 100 kg workpiece length 1000 mm Hjdjv Nq Swepfx Agzsg diameter 500 mm centre height 280 mm total power requirement 2,5 kW weight of the machine ca. 1 t dimensions of the machine ca. 1,6x 1x1,6 m

Condition: used, amplification -fold ? diameter 380 mm workpiece height max. 200 mm voltage 230 V weight of the machine ca. 245 kg dimensions of the machine ca. 0,80 x 1,20 x 2,00 m Hsdpfxjgbgd Te Agzsg - Serial-No.: 1740

Condition: used, Year of construction: 2013, Chip conveyor, manufacturer BMF - BÜRENER, with filter system and high-pressure pump. Hedpfxeiicnko Agzog Chip conveyor dimensions: Neck width: 600 mm, neck height: 200 mm, conveyor length: 3000 mm.

Condition: used, Year of construction: 1980, grinding length 500 mm grinding width 200 mm workpiece height 290 mm Machine from the German Federal Institute of Physics and Metrology - geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced - colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdown Manual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kg Warranty: 1 year on geometry and electronics, Germany-wide Delivery: ex works Shipping time: immediately Payment: before pickup Hodpfxjwb Hygs Agzsg Acceptance at our premises Shipping according to your specifications

Condition: new, Technical Data: Capacity: 60 t Installation height: 820 mm Max. working area: 820 x 300 mm Piston stroke: 400 mm Advance speed: 6.1 mm/s Return speed: 10 mm/s Motor power: 3 kW Width: 1460 mm Hjdpok Nz Ndofx Agzog Depth: 850 mm Height: 2400 mm Weight, approx.: 700 kg Features: - Laterally movable cylinder - Generously sized working area - Height-adjustable table - Torsion-resistant design made from welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump Support prisms available at extra cost.

Year of construction: 1972, condition: used, This machine is 3x available. Data: Hjdpfxog Umits Agzeg Manufacturer: Landis Type: FRM 50 E-8 Year of manufacture: 1972 

quill travel: approx. 100mm

 Distance between spindles in retracted position: approx. 550mm Workpiece diameter max.: 75mm travel: per unit 200mm 3 drive powers:
 8,5kW/ 750 1/min 12kW/ 1450 1/min 18kW/ 2960 1/min Remark: the machine is equipped for ø20 and 65mm long Accessories: with magazine

Year of construction: 2002, condition: used, Drum diameter: 682 mm Height: 539 mm Max. Filling quantity: 167 kg Max. Speed: 980 min-1 Control cabinet not available, can be ordered directly from Steimel (approx. 8,500 Euro - as of May 2021) Hsdpfx Ajfmqv Ujgzog Operating instructions available

Condition: new, Year of construction: 2025, functionality: fully functional, Fiber laser marking and engraving machine Galvo fiber laser marking and engraving machine for metals and plastics. Working area 150 x 150 mm Power 30 W Galvo head Electric Z axis 250 mm Max. speed 7000 mm/s Minimum line thickness 0.02 mm Software included Supported formats BMP, JPG, JPEG, GIF, TGA, PNG, TIF, AI, DXF, DST, PLT Hedouxc Nwepfx Agzog Machine dimensions 800 x 800 Machine weight 150 kg Standard accessories included Software, Usb cable, European power cable, External laser start pedal, Installed optics, Red laser pointer for positioning, Anti-radiation and eye protection cover, Optional accessories focal lens 110x110mm CE Certifications. Workable materials: Metals (steel, iron, aluminum, brass, silver, gold, etc...+ anodized, paintedat, chrome plated) Plastics and polymers (ABS, PP, PE, PC, PET, PES, PEEK etc...+ painted)