Holzprofi feeder Junior HP32,380V demonstration

Holzprofi VSHP32

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed Lrsdpfohfufgex Aglor -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Year of construction: 2006, condition: good (used), FIN Glue spreader SC2R/1300 with 2 rollers The year 2006 manufacture: FIN s.r.l. Italy main technical specification: Width of working: 1300mm The maximum passage between roller: 120mm The diameter of rollers: 185mm Advancement speed: 19m/min Net weight 390 Kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 200 x 153cm 400 V, 50 Hz, 037 kW Accurate and uniform spreading with any type of glue, excellent technical characteristics, added to the high practicalness, functionality and safety for the operator, place it at the Ljdpfxsfgunto Agljrr forefront among the 2 roller glue spreaders. Spreading roller covered in antiacid rubber, ground and furrowed, hard wearing, as they are built with a rational layer of rubber it is, therefore, possible to carry out 6-7 grindings. It is easy and quick to disassemble. Spreading, precise and uniform on one or both sides of the panels. Special shock-absorbers, on the roller supports, allow the rollers an automatic opening depth, so as to spread panels of different thickness within 5 mm. they also compensate for eventual parallelism differences of the panel. Uniform glue dosing by a rectified distribution tank, in sheet-iron, with very quick extraction to allow cleaning. Collecting tank, for glue and washing water, in galvanized sheet-iron, extractable for easy cleaning. Safety protections, in sheet metal on the rollers and glue distribution tank, a sheet metal protection prevents the introduction between the rollers of any object more than 5 mm. thick over the transit established, ensuring the maximum safety for the operator. Electrical installation, in a waterproof case with fuses, thermal switch for motor and transformer protection. Control panel, with starting button, stopping button and warning light (24 V). Rollers rotation chain with self-registrable turnbuckle pinion. Roller washing with a bored washing tube, for the water intake during this operation.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,550 mm, Used SCM Pratix S 15 - Year: 2012 - Available in January 2026 - 3 axes Lodpfx Ajxl D Sljglerr - Drill head - Videos available

Condition: used, Year of construction: 2001, total length: 2,680 mm, total width: 1,200 mm, total height: 2,200 mm, Colour: Grey Empty weight: 950 kg Price: On request Table milling machine Hofmann TFS 1200 Serial no. 127-01204 Year of construction 2001 7.8kW, 16amp, 400V 45 degree tilt adjustable. Aigner guide Feeder - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 127-01204 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 2680 - Table width [mm]: 450 - Tiltable spindle: Automatic - └ Min. tiltability [°]: 0 - └ Max. tiltability [°]: 45 - Feeding device present: Yes - Brand: Masterwood - Type: Euromeo - Number of wheels [pcs]: 4 - Number of speeds: 2 - Guide present: Yes - Brand: Aigner - Min. spindle speed [rpm]: 3000 Lrodpfx Aowl I E Esglsr - Spindle speed control: Incremental - Transport dimensions: 2680mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, Table saw/router combination minimax tw 45c With aluminum sliding table and pivoting router spindle – high performance at a low investment Article number 5502045 Brand Holzkraft / SCM TECHNICAL DATA Dimensions and weights Net weight approx. 290 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Work table Work table length 1000 mm, Sliding table length 1000 mm Work table width 435 mm, Sliding table width 270 mm Table height 900 mm Installation information Space requirement length 1945 mm, Machine body width/depth 710 mm Space requirement width/depth 2220 mm, Working area length 1600 mm Lrjdpfxohp Rcyo Aglor Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Working area width/depth 1600 mm Machine body length 1000 mm, Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Electrical data Connection voltage 400V, Power of drive motor 5.0 kW Mains frequency 50Hz Router spindle Spindle inclination 0 to -45°, Spindle speed 3500/7000/10000 min⁻¹ Usable length of the spindle 100 mm, Spindle arbor diameter 30 mm Maximum spindle overhang above the table 130 mm Maximum router tool diameter Maximum tool diameter, plunge-cut 180 mm, Maximum tool diameter, mortising cutters 275 mm Maximum tool diameter, profile cutters 210 mm DELIVERY SCOPE Arched router guard Anodized aluminum sliding table Telescopic miter fence Aluminum fence cheek

Year of construction: 2024, condition: new, Rollers: 3 Roller width: 60 mm Roller diameter: 120 mm Suspension travel: 20 mm Speeds: variable, 3 - 18 m/min. Stand options: Supplied without a stand / the following stands are available as options: Standard / 1050 / PLUS with counter Motor power: 0.75 kW Lredpfx Agjg Ez Smjlor

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM500 Dust Collector is a heavy-duty industrial dust extraction system designed for intensive use in large woodworking shops, furniture manufacturing plants, and production facilities. With an impressive 5,000 m³/h airflow capacity, a robust steel construction, and the ability to connect up to four woodworking machines simultaneously, the FM500 delivers reliable, continuous dust extraction while maintaining a clean, safe, and efficient working environment. Key Features 2.8 kW (S1) three-phase motor / 400 V – designed for continuous industrial operation. Airflow capacity of 5,000 m³/h – efficiently extracts sawdust, wood chips, and fine dust from up to four machines at the same time. Vacuum pressure up to 2,500 Pa – provides consistent suction performance, even under heavy dust loads. High-efficiency metal impeller – dynamically balanced for smooth, low-vibration, and quiet operation. Quick-release collection bag system – allows fast and tool-free bag replacement. Large 480 L waste collection capacity – minimizes downtime by reducing the frequency of bag emptying. Multi-port inlet manifold (Ø200 mm / 4 × Ø100 mm) – compatible with multiple woodworking machines. Mobile wheeled base – enables easy movement around workshops and production facilities. Construction and Technology The FM500 is built around a heavy-duty steel frame that ensures durability and long-term stability. A large-diameter, high-performance fan operating at 2,950 rpm generates an air velocity of up to 31 m/s, delivering powerful and consistent extraction performance. The machine is equipped with woven fabric filter bags (Class II filtration) capable of capturing dust particles as small as 5 microns, helping maintain clean air in the workplace while supporting compliance with occupational health and safety standards. Performance and Efficiency The CORMAK FM500 woodworking dust collector maintains stable suction power during prolonged operation, making it suitable for continuous production environments. It can effectively serve up to four workstations simultaneously without compromising extraction performance. The large filter surface area and high-capacity collection bags reduce maintenance intervals and maximize productivity. Applications The FM500 is ideal for: Woodworking and furniture manufacturing workshops Timber processing and panel production facilities Technical schools and vocational training centres with multiple workstations Production lines requiring centralized dust extraction systems Standard Equipment Two fabric filter bags Two waste collection bags Inlet manifold (4 × Ø100 mm + 1 × Ø200 mm) Mobile base with heavy-duty wheels Optional Equipment Cartridge filter (2-micron filtration) Flexible extraction hoses (Ø100 mm / Ø200 mm) Galvanized hose clamps Technical Specifications Specification Value Motor power (S1) 2.8 kW Power supply 3-phase, 400 V / 50 Hz Motor speed 2,950 rpm Airflow capacity 5,000 m³/h Maximum vacuum pressure Up to 2,500 Pa Air velocity Up to 31 m/s Ledpfx Aevu Aqpoglerr Filter bags Woven fabric (Class II filtration) Waste collection capacity 480 L Inlet connections 1 × Ø200 mm / 4 × Ø100 mm Overall dimensions (L × W × H) 1,525 × 560 × 2,460 mm Weight 64 kg

Condition: used, Year of construction: 1987, Wide belt sanding machine Manufacturer: Samco Type: EG Lsdpfjxdnrgox Aglsrr Year of manufacture: 1987 Sanding length: 3,000 mm Includes spare belts ä3826

Condition: reconditioned (used), machine/vehicle number: 10728, functionality: fully functional, Table size: 2300 x 900 mm. Lrjdoiyp Rfopfx Aglor

Condition: new, Year of construction: 2023, Exhibition machine Year of manufacture: 2023 Ledpfx Agsxvnmnelorr Features and technical data: - Double-sided operation with surface and contact grinding sides - Abrasive belt size: 200 x 2000 mm - Belt drive motor: 3 kW - Programmable oscillation stroke: 10–90 mm - Grinding unit motorized tilting up to 45 degrees - CE-compliant / Dust-tested Accessories: Semicircular table at the belt drive roller Dimensions (LxWxH): 1800 x 1000 x 1500 mm Weight: 610 kg Location: Solingen Availability: short-term