Grinding table

Hurrican Easy FA 1000

Condition: new, Year of construction: 2025, Manual operation with our ultrasonic cleaning technology, analogue control panel and temperature control via a digital thermostat Optional functions can be added to the PRO series. We have volumes from 60 to 7,500 L to meet all requirements. Tank capacity: 110L Außenmasse:1970x670x970mm Useful dimensions grate:550x350x250mm Ultrasonic frequency: 40kHz Nkodpof Hqavsfx Ag Ieu Ultrasonic power:1000W

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. Nksdpofyadbjfx Ag Iou The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Year of construction: 2022, condition: as good as new (ex-display), AL-KO grinding table AST 1.5 BASIC The AL-KO grinding table AST 1.5 BASIC is the entry-level model for the AL-KO grinding table program. He is certified according to GS-HO-11 and carries the seal of "Holzstaubgeprueft according to BGI 739-1" THEIR advantages accessible from 4 sides Take loads up to 150kg Manual, tool-free height adjustment with scale Contrasting sides for edge grinding Workpiece-friendly beech wood grid (removable) Funnel-shaped air Guide to the dust extraction spout Njdjdqzhbepfx Ag Isku TECHNICAL DATA LOAD 1.5 BASIC Intake 140 / 160 mm Required suction power 1.500 m ³/h Negative pressure at the connection at 22 m/s 1.000Pa in DN140mm 700Pa at DN160mm Working height adjustable from 735-1.015 mm Working surface (BxL) 946 x 1, 500 mm Dimensions (Wxl) 1, 000 x 1 600mm Weight 73 kg

Condition: new, table height: 650 - 1050messurements (LxWxH): 1950 x 950 x 650 bis 1050table width: 950table length: 1950weight approx.: 365This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. Nkodpfsfk Aivsx Ag Isu For more information please follow this link:

Condition: new, Year of construction: 2024, load capacity: 1,500 kg, Special price promotion 2000.-€ discount Perforated table 1200 x 2400 x 200mm Thickness of the table top 20 mm, diameter of the holes 28 mm Swivel range 360 Height adjustment Hydraulic motor 800 to 1200mm Nedpfxouua Ino Ag Ijku Speed 0.5 rpm Motor power 0.75 KW We offer the tables in many sizes and load capacities: Load capacity 500 Kg, dimensions 1000mm x 1500mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 1000 kg, dimensions 1000mm x 2000mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 1500 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 2000 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 3000 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 5000 kg, dimensions 1500mm x 3000mm x 200mm, bore 28mm with manual or automatic height adjustment

Condition: new, table height: 800messurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 288 Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable high-quality production of small and medium-sized series. The special worktables have a 16 mm (dual standard) or 25 mm (triple 24 + 1) worktop, which is provided with a Ø28 mm hole pattern. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or devices. The table perforation allows the use of a wide variety of clamping elements and fixing aids. For special applications, deviating from the standard, the table top surface can optionally be equipped in stainless steel 1.4301, aluminum, plastic or even high-strength materials ST70. Due to the fully screwed construction of the clamping plate, the work surface can be replaced inexpensively in the event of later wear. As a result, the table system remains particularly sustainable. Table 1 below gives an overview of the available standard models. Nodpfx Agjgrvwfe Ieku For more information, follow the link:

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system Nodpfx Agefzk Ewe Isku The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Condition: new, number 10 Positionen weight 30 kg condition neu 28 mm 10m length of screw clamps Thrust length 120 mm Length 300 mm Condition: new Nkodevn U Hcspfx Ag Iou Hole diameter 28 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,583 h, control type: CNC control, controller manufacturer: Bosch-Rexroth, controller model: Rexroth IndraMotion MTX, laser type: diode laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 3000, laser hours: 7,583 h, laser power: 3,000 W, punching force: 16 t, punching diameter: 76 mm, sheet thickness steel (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, overall weight: 13,200 kg, Equipment: CE marking, cooling unit, dust extraction, emergency stop, safety light barrier, Extended Station Equipment - Multitool function - MultiBend function - Thread forming function with thread counter Thread former breakage monitoring Lubricant level monitoring - Marking/fast bead function - Engraving function - Deburring and rolling technology function Extended Machine Equipment Nkedpfx Agsyic Sdo Isu - 1x additional hydraulic clamp Data Transmission - Wireless Operation Point - Mobile app control Standard Equipment: Machine - Enclosed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamps and tools - Hydraulic clamps (3 pieces) - Drives with maintenance-free three-phase motors - Repositioning device with programmable hold-down - Foot pedal for closing clamps - Beam protection with direct access - Part chute right - Part flap left - Sensor for part flap - Work area lighting - FocusLine - Retrofit capability for SortMaster Compact - Protective tool - Transport and assembly device TRUMPF Laser - Laser light cable according to standard layout (10m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser light cable (LLK) - Separate power supply for TruDisk Compact Cutting Unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch Head - Delta Drive - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Spray lubrication for punches - Punch slug extraction - Forming function - Stroke counter for punches Control - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Shutdown automation with wake-up function - Program management - Production plan Data Transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Two-beam safety light curtain Enhanced Standard Equipment - TruDisk 3001 solid-state laser with 1 LLK output - Cooling unit (water-air) - Compact extraction unit - 1st locating pin (inside right) - Ball tables - Good part container for part chute - Chip container for rear removal

Condition: new, Year of construction: 2024, functionality: fully functional, Extraction table without rear panel/side panels Technical data: Work surface: 2,000 x 1,000 mm Working height: 850-950 mm (manual adjustment) Width: 2250 mm (including energy bar) Power strip with tool tray: 2x 230 V socket with hinged cover, 2x compressed air couplings, mains cable and main switch Nkodpfjuzf Ihox Ag Ieu Extraction nozzle Ø 160 mm, with shelf