Welding table equipment

WMT Schraubzwingen 5

Condition: excellent (used), Year of construction: 2024, Tires for sale: Firestone Destination Tires M/T 255/75 17 Kodpfxowq Sa Rj Ab Tolp We have 5 tires: 2 tires are new, they were used for about 1 month.

Condition: ready for operation (used), Year of construction: 1980, load capacity: 3,000 kg, Equipment: pallet forks, The forklift was used in warehouse operations. The installed forks have a length of 1,600 mm and additional forks with a length of 1,200 mm can also be supplied. Kljdpfx Asx Dk Rfsb Tsp

Condition: good (used), Year of construction: 1985, machine/vehicle number: 4888, Offer 25234 Technical Data: - Drilling capacity in steel ST 60: 32 mm - Maximum drilling diameter in steel ST 60: 40 mm - Long spindle MK 3 - Drill spindle speeds steplessly adjustable - Range 1: 160 – 1125 rpm - Range 2: 320 – 2250 rpm - Drill spindle stroke: 120 mm - Feeds: 0.1 + 0.2 mm/rev - Throat depth: 293 mm - Column diameter: 115 mm - Table size: 300 x 300 mm - With 2 T-slots 14 x 224 mm - Emergency stop button - Machine vice - 10 pcs. HSS drill bits 10 – 25 mm - Required space approx.: W 500 x H 1750 x D 900 mm Kodpfswylvqjx Ab Tolp - Weight approx.: 270 kg

Condition: new, functionality: fully functional, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3,020 mm Pressing force: 320 t Approach speed: 140 mm/s Bending speed: max. 10 mm/s Return speed: 130 mm/s Y-axis stroke: 400 mm Installation height: 650 mm Throat depth: 450 mm Clear distance between uprights: 2,555 mm Machine length: 3,785 mm Machine width: 2,290 mm Width without support arms: 1,740 mm Overall height: 3,100 mm Table height: 920 mm Motor power: 22 kW Oil tank: 300 l Machine weight: 14,450 kg (Data may vary depending on equipment configuration.) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Press beam double-guided, stable and precise - Robust, double-guided backgauge Ksdpfx Abeuf Nr Ae Tolp - Backgauge fingers double-guided on linear rails - Movable front support arms with height adjustment - Side and rear safety covers - Lower die adapter rail 60 mm - Manual top tool clamping system (Promecam system) - Foot pedal with emergency stop - 380 V, 50-60 Hz, 3 phases - LED lighting Additional equipment: - Delem DA 66t CNC control - R-axis backgauge CNC-controlled - CNC-controlled crowning - Fiessler Akas 2M laser safety device - 2 additional backgauge fingers (4 in total) - 1 set of upper and lower tools Further bending lengths and capacities available with appropriate accessories!

Condition: new, functionality: fully functional, Year of construction: 2025, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Kjdpfx Aorq D Nieb Telp Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: used, Year of construction: 2025, operating hours: 50 h, functionality: fully functional, machine/vehicle number: SN078146, 12 months warranty / 1800 operating hours Ksdpfx Absxp Nd Io Telp

Condition: new, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3,020 mm Pressing force: 135 t Approach speed: 140 mm/s Bending speed max.: 10 mm/s Return speed: 130 mm/s Stroke: 320 mm Installation height: 550 mm Throat depth: 450 mm X-axis travel: 750 mm X-axis speed: 300 mm/sec R-axis travel: 250 mm R-axis speed: 100 mm/sec Clear distance between frames: 2,555 mm Machine length: 3,730 mm Machine width: 2,300 mm Total height: 2,850 mm Table height: 900 mm Motor power: 15 kW Oil tank: 190 l Machine weight: 9,500 kg (Technical data may vary depending on equipment) Standard features: - 3 CNC axes (Y1, Y2, X) - Double-guided, stable, and precise ram - Robust, double-guided backgauge - Manually adjustable, double-guided stop fingers on linear guides - Adjustable front support arms with height adjustment - Lateral and rear safety covers - Lower die adapter rail, 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3-phase Kljdpfx Aoq Rdtqeb Top - LED lighting Recommended options: - Dener DA 66T control - Fiessler AKAS 2M laser finger protection - FPSC Safety PLC (manual) - X and R axes with servomotors - CNC crowning for high bending accuracy - 2 additional stop fingers - Other working lengths and thicknesses available with suitable accessories! -

Year of construction: 2025, condition: new, lxbxh 7500x2550x3000mm stainless steel frame with aluminium bottom and aluminium outside walls and roof this container is made for changing systems on trucks with hydraulic feet, to lower down the platform to the ground Kljdpfxjcltl Ej Ab Tep - Central control panel (for belt press and washing elevator): it is fixed that it is not on the belt press. It is either in the center of the container or on the washing elevator. - Canvas cover: Additional hanging cover side doors: on the heater side in two parts - Water supply: Connection and system in 1" - Hydraulic system: Operation with 24V DC and 400V power supply; 24V DC magnetic valves

Condition: used, x-travel 800 mm y-travel 400 mm z-travel 300 mm Kledpfjqpl Uujx Ab Tep digital readout Heidenhain table surface area 1000 x 520 mm turning speed range 40 x 2000 U/min spindle taper SK 40 total power requirement 2,2 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 1700 x 1600 x 1800 m

Condition: new, Year of construction: 2025, Manual operation with our ultrasonic cleaning technology, analogue control panel and temperature control via a digital thermostat Optional functions can be added to the PRO series. We have volumes from 60 to 7,500 L to meet all requirements. Tank capacity: 110L Außenmasse:1970x670x970mm Useful dimensions grate:550x350x250mm Ultrasonic frequency: 40kHz Ultrasonic power:1000W Klodpfxef Hqavs Ab Top