Stationary extraction system

IMAS MAXMATIC

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW Lodpfxju Nigko Afuort weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: good (used), Surface grinding machine, grinding machine -hydraulic horizontal surface grinding machine -Magnetic plate: 300 x 150 mm -Grinding wheel motor: 1.1 kW 2800 rpm -Water cooling with: filter Lrjdpfx Afsd A Idxjust -Grinding disc diameter: 200 mm -Transport dimensions: 1470/1170/H1920 mm -Weight: 1090 kg

Condition: used, machine/vehicle number: 008205, X axis working area: 4250 mm Y axis working area: 1320 mm Working Table: Pod and Rail Ledpsx A Th Refx Afusrt Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 22

Condition: reconditioned (used), Year of construction: 2004, AUTOMATIC WINDMILL PRESS WITH MECHANICAL LOCKING AND FEEDING AFTER A COMPLETE RENOVATION Lsdpfx Afelnanweusrt

Condition: excellent (used), 4 kW motor Transport dimensions Height 310 cm Width 90 cm Length 180 cm Ljdpfjup Ulqsx Afujrt

Condition: new, Finger-setting machine with a segmented top clamp PNEUMATIC CYLINDER!!! Lrsdpfxoga T Dle Afuet Max. setting capacity over the entire working length ----- 1.5 mm Max. working length ----- 1500 mm Max. opening width ----- 48 mm Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 2x 250 | 275 mm Max. setting angle ----- 0 - 135 degrees Weight ----- 430 kg Width ----- 1820 mm Depth ----- 850 mm Height ----- 1175 mm

Year of construction: 2005, condition: good (used), TMG roller row, roller conveyor 45cm wide, in several lengths, gravity or driven version. Roll: 40 x 450 mm bearing shaft. Track width: 500mm plus side guides Length: 0.7-4m lateral guide rail on request Meter price. Without drive: 150 euros With drive: 200 euros Lrsdpfx Aegy Hapjfuot

Year of construction: 2012, condition: excellent (used), Used modern, very clean & fully serviced Bystronic Xact 160 3metre x 160ton cnc pressbrake for sale: Model: Xact 160 Make: Bystronic Xact Smart 160 Year 2012 Cybelec 880S cnc control Working length mm: 3100mm / 3metre Max. press force kN: 1600 / 160ton 2 axis back gauge – R and X axis 4 axis in total Lrjden E Tryspfx Afuot Max.stroke mm: 200 Rapid approach mm/s: 100 Working speed mm/s: 1-10 Return speed mm/s:95 With crowning Weight kg 9800 Machine will come with tooling

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood shavings and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Description of the filter: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Lodpfjcnw T Isx Afusrt Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg.

Condition: new, Year of construction: 2026, The manufacturer guarantees the cleaning quality The system of automatic vibrating cleaning of the filter cloth - during breaks and during filter operation, it allows for constant monitoring of the correct operation. Technical specifications: • Conforms to H-2 standard • Extraction capacity ~ 4500 m3/h • Motor power 3.0 kW • Speed 3000 rpm • Voltage 400V, 50Hz • Suction connection 200 mm • Polyester filter material, 5 microns • Filter surface 8.8 m2 Lodpfjgyfmajx Afuert • Speed 28 m/sec. • Number of filters 18 • Dimensions 752 x 1502 x 2144 mm • Weight 180 kg • Category of filters G • Polyester filter material • Noise 80 dB without connection, 65 dB when connected to the machine via pipe Delivery set: - 5 micron polyester filter - 1 container - Running gear - Filter cleaning using a controlled vibration system - Fire extinguisher - Fulfill H-2 Norms + 850 euros for the model with fire extinguisher (Safe System)