Rolling rails

JOEMA

Condition: like new (used), Year of construction: 2012, Longitudinal profiles for machining on both sides Toothed transport chains for secure wood transport Solid wood planks, castle planks, flooring Wood width currently approx. 260 to 660 mm Wood height currently approx. 15 to 85 mm Chip removal per side up to 50 mm 2 machining motors, each 7.5 kW, on the right Itodpfx Aeduw Auohvol 2 machining motors, each 7.5 kW, on the left Feed gearbox motor 3.0 kW Condition: very good

Condition: refurbished (used), pressing force: 10 t, working height: 805 mm, total length: 1,700 mm, year of last overhaul: 2026, Hydraulic finger jointing cycle press (Keilzinkpresse), cycle press for finger joint connections with a pressing force of 10 t. Wood width 80 – 300 mm, wood thickness 18 – 100 mm. OPTIONS: With 300 l hydraulic unit and 5.5 kW motor, manufacturer GOD; with electrical installation. Itodpfxot Sc Sws Ahvsl

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), -300 mm x 2600 mm max. timber cross-section -circular saw blade D 900 mm determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount 8.500 € new electrical control cabinet 22.500 € without steel construction and without assembly Itjdpfx Ahecbq Nwevjl -the special saw was only used for about 5 hours after the overhaul >>Made in West Germany 100% massive steel construction with movable portal and mounted saw unit from above, circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and completely covered. machine overhauled without additional safety devices >> The working width can also be increased by conversion

Condition: used, heavy duty roller conveyor for buffering laminated beams or as a heavy-duty roller conveyor from length 6 m up to a length of 84 m Ijdpsk Iuglefx Ahvetl >also suitable for steel transport etc

Condition: like new (used), Socolest DAS 200 twin-shaft multiblade feeding and receiving table - Made in Italy - centering feeding table - discharge receiving table - top drawing rollers Iedpsqup Anjfx Ahvjtl TECHNICAL PARAMETERS: - cutting height 200 mm - cutting width 400 mm - engine power 2 x 55 kW - track width 630 mm - disc diameter max 350 mm - feed speed 40 m / min - hydraulic roller height adjustment - hydraulic cutting height adjustment - hydraulic feed - four top pulling rollers - four rows of anti-rejection latches - shaft diameter 70 mm - sleeve diameter 90 mm - pneumatic side pressure centering - diameter of ferrules 2 x 250 mm - minimum workpiece length 720 mm - laser - feeding table belt 5700 mm - width of table 600 mm - top roller pneumatic pressure roller - speed of table regulated on inverter - receiving table 9200 mm - width of rollers 800 mm - diameter of rollers 135 mm - four drop chains - distance between chains 1900 mm Transport dimensions 1300 cm x 240 cm x 200 cm weight 8 t

Condition: used, Steel structure for crane system Width: approx. 8.5 m Length: approx. 7.95 m System dismantled The system is sold "as is". Inspection: You are cordially invited to inspect the item – simply contact us and arrange an appointment at short notice. Ijdpfxobruzgj Ahvstl Note: no guarantee, no exchange, no returns possible.

Condition: new, Dimensions: W2500 / L5250 / H- 2100 Itedpfxeu E Ezps Ahvel

Condition: used, Year of construction: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Horizontal miter angle range: 45°-90°-25° Itsdpeiixxnofx Ahvol Vertical miter angle range: 60° - 90° - 30° Swivel adjustment with crank: yes Roller conveyor / support table: no Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Dust extraction port: 100mm Machine length: Machine width: Weight: 110 kg

Condition: used, Steel structure for crane system Width: approx. 8.3 m Length: approx. 5.1 m System dismantled Itodpfxebruzbe Ahvjl The system is sold “as is”. Inspection: You are cordially invited to inspect the item – simply contact us and arrange an appointment at short notice. Note: No warranty, no exchange, no returns possible.

Condition: used, Iseli BS 5 sharpening machine Iseli EBW leveling machine Itjdpfjwgh H Ejx Ahvjl