Wood shredder

Kara 800

Condition: used, Year of construction: 2026, Special price – demonstration machine, Garbsen. Our WL 6 machine concept. The Weima high-performance shredder, with its flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, achieving a significant volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be loaded via a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without requiring manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent controlled. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive, and four-way rotatable knives/cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction in the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption, and an optimal discharge of the shredded material. The screen located under the rotor determines the chip size (10 - 100 mm). An optionally available, hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor shaft on one side. Precise cutting at high throughput with a profiled V-rotor. The V-rotor, developed specifically by WEIMA, is universally applicable and made of solid material. Its aggressive material feed, with up to two knife rows, guarantees a high throughput with low power consumption. It can be equipped with hardened cutting knives made of steel with edge lengths of 30 mm and 40 mm. These can be repeatedly rotated when worn, which drastically reduces maintenance costs. Intuitive operation thanks to a Siemens PLC control with a touch display. To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. In doing so, we use only high-quality components – for example, from Siemens or Rittal. Intuitively operable touch screens guarantee quick adjustments. Functions such as adjusting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. Technical specifications WL 6: Feed opening 800 x 1,250 mm. Hopper capacity 0.9 m³. Rotor length 800 mm. Rotor diameter 256 mm. Drive power 22 kW. Rotor speed 90 rpm. Max. number of knives 42 pieces. Type and size of knives: concave / 40 x 40 mm, cutting crowns. Screen size 10-60 mm. Paint: WEIMA standard RAL 2022 / 7016. Connection value 400 V +/- 5% / 50 Hz. Weight approx. 1,600 kg. Including: - Control cabinet* (Rittal) incl. electrical control (Moeller / Siemens) and S Tjdoy D E Tdopfx Aknec

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 230 V, planing width: 330 mm, rotational speed (max.): 9,000 rpm, total width: 615 mm, total height: 555 mm, total length: 850 mm, chip removal: 3 mm, height adjustment type: mechanical, number of feed rollers: 1, number of planer blades: 36, planing height: 156 mm, PS33 with spiral shaft • Innovative design and powerful motor. • Chip removal of up to 3.2m. • IN & OUT TABLE. • Double knife cylinder with double-sided knives. • Indicator shows the material removal on the front of the machine. • Planer shaft with reversible knife • No extraction system required thanks to integrated fan to remove sawdust from the planer cylinder • Depth stop with seven positions for repeated thickness planing at the same height • Maximum part width up to 330 mm • Type: PS33 • Recommended use: Craftsmen • Input power (230 V): 1.8 kW • Planer shaft speed: 9,000 rpm. • Planer shaft diameter: 46 mm Tsdpfx Aovncu Ieknoc • Number of reversible plates in planer shaft: 36 pieces • Reversible plate size: 15 x 15 x 2.5 mm, R=150 • Feed speed: 7.9 m/min. • Max. material removal: 3.2 mm • Max. planing width: 330 mm • Max. planing thickness: 156 mm • Min. workpiece length: 120 mm • Extraction: integrated fan, 62 mm suction nozzle or fabric bag • Noise level: 96 dB • Machine dimensions (length x width x height): 340 x 615 x 555 mm • Machine dimensions with tables unfolded (length x width x height): 850 x 615 x 555 mm • Machine weight: 35 kg • Packaging dimensions (length x width x height): 415 x 660 x 545 mm • Package weight: 39 kg Included in the package: • 36 carbide inserts (in the planer shaft) • 5 replacement carbide inserts and screws • Waste bag for sawdust and Dust • Connection set for waste bags • Torx key for changing the inserts (TX25)

Condition: new, Year of construction: 2026, The ball mill is ideal for mineral ores. Tsdpfx Ajpahwvoknsc

Condition: repair required (used), functionality: unexamined, Dovetail slotting machine for wood packages dimter HK 400 Dovetail slotting machine Input lengths: 800–6000 mm Cutting height: 285 mm, optionally 300 mm Color: Blue Consisting of: Pos. 01 Packaging unit Pos. 02 Package roller conveyor Pos. 03 Central milling cutter Pos. 04 Package roller conveyor Pos. 05 Package singulation unit Pos. 06 Chain cross conveyor Pos. 07 Infeed roller conveyor Pos. 08 Cycle press Todpsvi Hw Nsfx Aknoc Pos. 09 Feed unit Pos. 10 Cut-off saw Including control cabinets and operator panels The machine requires repairs and is sold in its current condition. It has already been dismantled and is stored in Achern. All technical documentation is available. We are available at any time to answer questions about the machine and provide technical information. We will provide consulting support for repair and reassembly.

Condition: excellent (used), SICAR Forte 400 thicknesser Working width 400mm Planing height 300mm Shaft with conventional knives Todpfxst Rp Hxs Aknec Shaft with 4 knives Shaft speed 5200r.p.m Electric lifting and lowering of the work surface Main motor 3kw 3 feed speeds CE certificate

Year of construction: 2022, condition: new, Complete solution for transporting bulk goods such as wood chips, wood pellets, shredded goods, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 4,000mm (customizable) Angle in the bend freely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, ​​felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x30mm T-40 lugs - 300mm pitch 2-layer particularly laterally stable We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Tedpfoilg U Eex Aknoc Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Year of construction: 2002, condition: reconditioned (used), Fully automatic tenon and mortise system: Double-Pack type with automatic feeding with multiple cross-cutting saw with stacking system Specification: Wood input length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Wood output length: 6030 mm Max. wood cross-section with 10 mm tenon size: hardwood 120 cm² softwood 150 cm² Tenon design: vertical and horizontal Adhesive type: PVAC white glue, two-sided adhesive application Electrical power: Connection voltage: 400 V Control voltage: 24 V 50 Hz System completely wired up to the control cabinet. Tenon length / optional wood cross-section and adhesive type can still be adjusted. Performance: 6 milling stations/min Working height: 960 mm Tsdpfxjg D Ugke Aknoc Table width: 600 mm Adhesive application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Bundle width: 600 mm Glue application: double-sided application (on both sides of the

Condition: used, Year of construction: 2012, functionality: fully functional, Milling head debarking, max. 6000 mm length, 35 kW, with mechanization. Tsdexpuzrepfx Aknec

Condition: good (used), Year of construction: 1991, power: 22 kW (29.91 HP), suitable for pallets or other residual material Tedpfx Aot Tvk Asknoc Rotor width = working width 98 cm 22 kw motor with discharge auger

Condition: as good as new (ex-display), Year of construction: 2025, Complete solution for transporting bulk goods such as shredded goods, wood chips, wood pellets, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 5,000mm (customizable) Angle in the bend 35,40 or 45° Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 500mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x25mm T-50 lugs - 400mm pitch 2-layer particularly laterally stable Fixed overbelt magnetic separator: Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Todpji Igdfjfx Aknoc Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator