Band saw KASTO - KASTOTWIN A2

KASTO KASTOTWIN A2

Condition: used, Year of construction: 2002, cutting range 260 x 260 mm cutting speed 20 - 110 m/min weight approx. 2.100 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Fjdpjx I Siyjfx Agdsft Prior sale is reserved.

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Ffodpfxjwuddvj Agdst Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA)

Year of construction: 2005, condition: ready for operation (used), A hydraulically operated high-performance bandsaw with two-column guide and full enclosure. Cutting range: 260×260mm, cutting speed: 20–110m/min (infinitely variable), weight: approx. 1700kg. Machine dimensions: approx. 1800×2200×1600mm. An inspection can be arranged by appointment. Ffjdpfxjxtpq Aj Agdst

Condition: good (used), Year of construction: 2011, Smallest diameter 10 mm Shortes length singel stroke 15 mm Shortes length automatic mode 100 mm Working height 700 mm Max. stroke 9999 mm Touch screen 6.4" color screen Memory 99 program with  Bundel clamp device  New price 45.000 Capacity 90°: 260° Cutting flat 90°: 260 x 260mm Feed single stroke: 750mm Feed multiple stroke:7500mm Min. cutting length:100mm Fjdpfx Agew Ryg Rsdoft Cutting speed Vario:20 - 110 Circle blade size: 4530 x 34 x 1,1mm Power: 5kW Length: 1800mm Width: 2150mm Height: 1600mm Weight: 1700kg

Condition: like new (used), Year of construction: 2024, CNC SMOOTH AI, Travel X axis 650 mm, Y axis 550 mm, Z axis 530 mm, B axis +120° to -30°, indexation 0.0001°, C axis 360° indexation 0.0001° and continuous, Max. part diameter 730 mm, Max. height 450 mm, Spindle 18,000 rpm BT 40, 90-tool magazine, RENISHAW RMP 600 probe, 70 bar through-spindle coolant, CROMAR chip conveyor. Options: electronic handwheel, robot interface preparation, and automatic side door, simultaneous 5-axis machining and engraving function. Ffodpsxw S Rasfx Agdot

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 6459103320, Technical data KASTOtwin A 2 Dimension standard machine Length 1 755mm Width 2 475mm Height 1 570mm Total weight approx. 1 700kg Total drive power 5.0kW Cutting range in mm approx: Cutting area Ø 260 mm Cutting area, flat ( W x H ) 260 x 260mm Smallest dimension round Ø 10mm square, H x W 10mm Material feed length single max. 750mm Multiple feed 9 999mm Shortest cut-off length 6mm Smallest diameter to be sawn 10mm Minimum remaining piece in single cut 15mm Shortest remaining piece length in automatic mode 100mm Cutting speed, infinitely variable 20 - 100m/min Saw blade dimensions 4530 x 34 x 1.1mm Material support height 700mm Ffjdjtiwz Iopfx Agdot Cutting feed: infinitely variable Material feed ball screw Hydraulic belt tensioning

Condition: used, Year of construction: 2009, cutting range 260 x 260 mm cutting speed 20 - 110 m/min weight approx. 1.700 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Roller conveyor - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Fjdpfjx I Sitjx Agdoft Prior sale is reserved.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 810 mm, turning diameter over cross slide: 800 mm, turning diameter: 320 mm, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 810 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, CNC FANUC MSX-701 / MAPPS IV CAPACITY Swing diameter over bed: mm 800 Swing diameter over cross slide: mm 800 Maximum turning diameter: mm 320 Standard turning diameter: mm 200 Maximum distance between the center: mm 1.130 Maximum turning length: mm 810 Maximum workpiece size: mm 300 TRAVELS X axis turret 1 and 2: mm 210 Y axis turret 1 and 2: mm +65 / -45 Z axis turret 1 and 2: mm 810 B axis headstock 2: mm 920 MAIN SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 SUB SPINDLE Maximum speed: rpm 5.000 Drive power (30 min / continuous operation): kW 25/22 Maximum bar diameter: mm 65 Ffsdewlvlgspfx Agdst Spindle bore: mm 73 Spindle diameter in front bearing: mm 120 Spindle mount: JIS A2-6 C-axis resolution: degrees 0,001 FEED DRIVES Rapid traverse turret 1 X/Y/Z: m/min 30/20/50 Rapid traverse turret 2 X/Y/Z: m/min 30/20/50 TOOL TURRET Number of turrets: 2 Number of tool stations per turret: 16 Shaft cross – section for turning tools: mm 20 x 20 Maximum shaft diameter for boring bars: mm 32 Turret switching time (1 station): s 0,18 Maximum speed of the driven tools: rpm 6.000 Drive power for driven tools (5 min/continuous operation): kW 7,5/5,5 DIMENSIONS Installation area with chip conveyor: mm 5.120 x 2.720 Net weight: kg 8.300 Macchina equipped with: • High pressure cooling system • Bar loader interface • Gantry-type piece unloading arm • Cutting effort management system and load monitor • No. 1 double radial motorized tool holder • No. 3 axial motorized tool holders • No. 2 external tool holders • No. 2 double boring bar holders • No. 2 single radial motorized tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centering chucks diam. Mm 210 • No. 1 set of jaws for each self-centering chuck • Instruction manuals and CE declaration Year of manufacturing: 2010

Condition: like new (used), Year of construction: 2014, operating hours: 15,000 h, Atlas Copco compressor stage after refurbishment. Ffsdpfx Ajmzbdwsgdet

Condition: good (used), functionality: fully functional, Year of construction: 2011, working width: 1,300 mm, throat depth: 410 mm, distance between stands: 960 mm, operating speed: 20 mm/s, reverse speed: 20 mm/s, overall weight: 3,600 kg, total length: 2,740 mm, total width: 2,140 mm, total height: 2,317 mm, input voltage: 200 V, pressing force: 36 t, working length: 1,300 mm, CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 Year of construction: 2011 Pressing force: 352 KN Table length: 1300 mm Bending length: 1300 mm Distance between uprights: 960 mm Frame depth: 410 mm Fjdpfx Agowgw Hhjdeft Maximum stroke: 150 mm Opening: 420 mm Motor power: 200 V with transformer for 400 V Power: 13.2 kVA Total length: 2740 mm Total width: 2140 mm Total height: 2317 mm Machine weight: 3600 kg