Band Saw - Automatic - Horizontal

KASTO KASTOtwin A2

Condition: used, Year of construction: 2008, functionality: fully functional, operating hours: 1,757 h, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 250 mm, cutting width (max.): 250 mm, control type: NC control, overall weight: 1,700 kg, Equipment: documentation/manual, For sale is a KASTO KASTOtwin A2 fully automatic bandsaw from 2008. Bodpfx Aezyarwoknjln The machine was in use until recently, has been regularly maintained, and operates reliably. It will be thoroughly cleaned before collection. Technical specifications: Manufacturer: KASTO Type: KASTOtwin A2 Machine No.: 6459 104 007 Year of manufacture: 2008 Control system: KASTO BasicControl Connection: 400 V / 50 Hz, 3~ Connected power: 5.0 kW / 16.0 A Weight: approx. 1,700 kg Operating hours (control system): 3,756.6 hours Operating hours (saw): 1,702.9 hours Total number of pieces cut: 12,480 Equipment: Roller conveyor 4,100 mm Chip conveyor Coolant system Several new, unused saw blades included Operating manual and documentation available The machine can be inspected and demonstrated in operation after prior arrangement. Loading is possible without any problems; a forklift is available on site. Invoice with VAT shown. Sold as a used machine, excluding any warranty, guarantee, or right of return.

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min Bljdpfoz N Amex Aknsn cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

Year of construction: 2005, condition: ready for operation (used), A hydraulically operated high-performance bandsaw with two-column guide and full enclosure. Cutting range: 260×260mm, cutting speed: 20–110m/min (infinitely variable), weight: approx. 1700kg. Machine dimensions: approx. 1800×2200×1600mm. An inspection can be arranged by appointment. Blsdpfx Aksxtpq Aensn

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 6459103320, functionality: fully functional, Technical Data KASTOtwin A 2 Dimensions of standard machine Length: 1,755 mm Width: 2,475 mm Height: 1,570 mm Total weight approx. 1,700 kg Total drive power: 5.0 kW Cutting range in mm approx.: Cutting range Ø 260 mm Cutting range, flat (W x H): 260 x 260 mm Smallest round dimension Ø 10 mm Square, H x W: 10 mm Single feed length max. 750 mm Multiple feed: 9,999 mm Shortest cut length: 6 mm Smallest diameter to be cut: 10 mm Bodpotiwz Isfx Aknjln Minimum remnant per single cut: 15 mm Shortest remnant length in automatic operation: 100 mm Cutting speed, infinitely variable: 20 - 100 m/min Saw band dimensions: 4,530 x 34 x 1.1 mm Material support height: 700 mm Cutting feed: infinitely adjustable Material feed: ball screw spindle Band tension: hydraulic

Condition: used, For sale is a high-quality TESA Micro-Hite 3D height gauge in a large, motorized version, offered as a complete measuring workstation. This system combines precise height measurement with extended 2D/3D coordinate functions, making it ideal for use in quality assurance, metrology, and production. Particularly noteworthy is the extensive range of accessories and the existing PC connection with printing capability, which allows measurement reports to be created and documented directly. Technical specifications: Manufacturer: TESA (Switzerland) Model: Micro-Hite 3D Type: Height gauge / 3D-capable measuring column Measuring range: approx. 600 mm (large version) Resolution: up to 0.0001 mm (0.1 µm) Drive: motorized adjustment Measuring system: digital / electronic Data output: interfaces for PC / peripherals Measuring functions: Height measurement Internal and external measurement Diameter measurement Distance measurement 2D/3D point measurement Geometry and position calculations Equipment: Granite measuring plate Stable machine base Motorized measuring column Integrated control unit External PC workstation (monitor, computer, input devices) Printer for report output Accessories: Extensive set of measuring probes (ruby tips, extensions, etc.) Tool holders and fixtures Accessory case / wooden box The measuring device has already been disassembled and packed. Bodpfx Akjy Tkg Usnjln

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg +++++ Please note: Bedpfx Asf Dwa Uokneln The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2007, condition: ready for operation (used), Cutting range round: 560mm, cutting range flat (W x H): 620/560mm, material feed length, single: 900mm, multiple feed: 9999mm, shortest cut length: 6mm, minimum diameter to be cut: 15mm, minimum remnant in single cut: 15mm, shortest remnant length in automatic mode: 80mm, saw motor power, frequency-controlled: 5.5kW, cutting speed, stepless: 13-127m/min, saw blade dimensions: 7400/54/1.6mm, material support height: 700mm, total drive capacity in basic configuration: 12kW, length: 2370mm, width: 3610mm, overall dimensions with chip conveyor (L/W): 2370/3610mm, machine table height lowered: 2230mm, weight: approx. 5.2t with chip conveyor. An inspection on site is possible. Blodpfsxg Rhvex Aknsn

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump - Control cabinet air-conditioning unit - Kupa loader Bjdeycvaqspfx Aknsln - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately

Condition: excellent (used), Year of construction: 2018, operating hours: 15,845 h, functionality: fully functional, machine/vehicle number: S6E182501, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 22 W, The machine is very well maintained, with 90% of its operation carried out by a single user. Serviced according to the manufacturer's recommendations. Bedpfx Aoyvtugsknjln

Condition: used, O F F E R We can offer you ex stock, subject to prior sale and errors: TSCHUDIN (CH) Centerless cylindrical grinding machine Model TC-300 Year of manufacture 2001 Grinding range – Ø 0.5 – 25 mm (30) Max. workpiece length for plunge grinding 125 mm (140) Max. workpiece length for through-feed grinding 300 mm Grinding wheel dimensions: Ø x width Ø 300 x 125 mm (140) Regulating wheel dimensions: Ø x width Ø 225 x 125 mm (140) Grinding wheel peripheral speed 35 m/sec Grinding wheel infeed 3 mm Regulating wheel speeds, steplessly adjustable 0 – 444 rpm Regulating wheel inclination Degrees Grinding wheel drive approx. 7.5 kW Total connected load approx. 13 kW – 380 V – 50 Hz Weight 2,500 kg Accessories / Special equipment: • The machine operates with a fixed workpiece position, allowing both the grinding spindle and the regulating spindle units to be adjustable. This simplifies machine setup as well as automatic workpiece loading and unloading. • SIEMENS PLC control for automatic operation with SIEMENS touchscreen. Complete electrics and PLC control renewed in 2016! • Electromechanical profile dressing device for the regulating wheel • Regulating and grinding wheel speeds are steplessly adjustable. • Adjustable plunge guide bridge with mounted plunge workpiece rest • Electromechanically controlled workpiece pusher & automatic pneumatic workpiece ejector • Additional outfeed cylinder for automatic tilting of workpieces after plunge grinding (adjustable 4–30 mm) • Machine is prepared for use with a HELP-TEC bar loader MSHL08/400P, which is currently not present. • Complete enclosure of working area with monitoring technology • Separate control cabinet, operating and electrical manuals for the retrofit Blodpfx Aswftt Usknon Condition: Very good! Fitted with new electronics in 2016! Click here for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – after receipt of invoice Always a large selection of grinding machines in stock – please inquire for your requirements!