Hacksaw

KASTO VBS 242

Condition: used, Year of construction: 1980, machine/vehicle number: 19780, grinding length:600 mm grinding width:300 mm workpiece height:375 mm number of spindle speeds:1000 - 3000 UpM grinding wheel dimensions::300 x 50 x 76,2 mm grinding spindle drive:2,8 - 8,4 kW weight of the machine ca.:3,5 t Phedpfecxxrzsx Agzea CNC-controlled, 3D-controlled profile-dressing unit, Unicom ELB-CNC control with integrated 024 CNC Unicon electric hand wheel, display screen, analogue spindle load display, stepless adjustable cross feed, coolant device with magnetic-roller chip collector, full housing, separate electrical cabinet, additional grinding wheel with flange

Condition: new, Year of construction: 2025, POSSIBILITY TO CALCULATE ANY CRANE CONFIGURATION – from 500 kg lifting capacity up to 10 tons. Any dimensions available. Pedpfxsv Ni Ikj Agzoha Thank you for your interest in our offer. WNM Sp. z o.o. offers the following equipment: gantry cranes, semi-gantry cranes, wall-mounted jib cranes, column-mounted jib cranes, underhung bridge cranes, and top-running bridge cranes. A VAT invoice is issued for all machines. If you have any questions, please do not hesitate to contact us.

Condition: refurbished (used), Brenta bought a new one in Italy, worked a little. A complete overhaul and service was done. It is in excellent condition. Phedpfx Ash Hnn Uogzja

Year of construction: 2011, condition: like new (used), For sale is 1 roller conveyor incl. one geared motor each: Technical data: Year of construction: 2011 Length: 12,75m Width: 1.40m Height: 1.00m Loading: 4 tons possible Gear motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details see picture on the type plate) Three of the four roller conveyors have a wooden wall on one side over the entire length and one roller conveyor has a side wooden wall with a length of 5.20! Two of the four roller conveyors are each equipped with 3 lateral removal systems. (see pictures) Pedpfx Asihpn Njgzoha

Condition: excellent (used), Circular saw flat motor KATT 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second stub shaft for hydraulic pump drive with pulley 150 mm Ø, tested and with new bearings. Psdpfeh D Rt Aex Agzjha

Year of construction: 2000, condition: good (used), CNC surface and profile grinding machine Phsdpfx Asfrbckogzea Fabr.Ziersch & Baltrusch Type:PROFITLINE ZB 62 NC Year of manufacture.2000 grinding range : 600X270mm Electromagnet with continuous transverse pole pitch 600X200mm. P = 4 mm Wet grinding device, with automatic paper belt filter, machine trough. Complete machine documentation available.

Condition: excellent (used), ZEISS Type: DSM 962 The digitized scanning electron microscope DSM 962 is equipped with an integrated 4 MB image memory, a 40 MB hard disk for internal image storage and drives for external storage of data and images. hard disk for internal image storage and drives for external storage of data and images. This makes it possible to quickly and easily gain insights into the composition and morphology of morphology of specimen surfaces far into the sub-micrometer range. With magnification range from 5x to 300,000x, both macrostructures and microstructures can be examined. as well as microstructures is possible. The range of applications can be extended considerably by adding special accessories, allowing, for example Psdpfofcwwnox Agzjha analytical investigations in micro areas of the surface are possible. The device can be operated both via conventional switching elements and via the keyboard or mouse (add-on). or mouse (add-on). Electron optics and vacuum control are conventional. Functions of the Image memory functions are operated using the keyboard or mouse (add-on). A separate information screen is located centrally on the separate information screen for displaying the menus. These operating instructions are intended as a guide to help the user achieve the best possible results with the device. results with the appliance. The explanations have been kept as simple as possible so that even a less experienced user less experienced users the necessary tools. Magnification range: 20x to 300,000x at 7 mm working distance Stages in a sequence of 1-2-3-5-10 Minimum magnification: 5x at 50 mm working distance Resolution: 4 nm - guaranteed with tungsten cathode at 30 kV, 6 mm working distance, untipped specimen 25 nm - guaranteed with tungsten cathode at 1kV, 6 mm working distance, untipped specimen 3.5 nm - guaranteed with optimal LaB6 cathode at 30 kV, 6 mm working distance, untilted specimen Scope of delivery: (DSM 962 with accessories as shown) Condition: used (Subject to changes and errors in technical data and specifications) Please ask about transportation options before purchasing. We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 1975, -KOM 1002-

 Offered here is a press of the company HYDRAP of the type HKPS8000. Technical data: Psdpfx Ajg Ufvbegzoha Type: HKPS8000
 Year of manufacture: 1975
 effective stroke: 200mm throat: 250mm (at center) table size: 320x320mm Installation height: approx. 345mm Voltage: 380V 
Perm. load: 80000N
 Drive type: HYDR Drive power: 1,5kW Oil quantity: 60l Oil viscosity: 3°E

Condition: good (used), machine/vehicle number: 12 230091, Grinding wheel dimensions: 300 x 40 x 76 mm grinding wheel speed: 1400 rpm grinding wheel drive: 380 V, 1,5 kW Weight approx.: 85 kg Space requirement: 720 x 470 x 400 mm Podpfjcwwm Tjx Agzsha

Condition: ready for operation (used), Slab recovery line with below machines: One 2-blade board edger Phjdpegwqk Sefx Agzsa One single blade horisontal resaw Conveyors system between the machines included.