Woodturning machine / lathe

Killinger KM5000S-M

Condition: used, Year of construction: 1982, Technical details: bore capacity in steel (diameter): 28 mm throat: 300 mm bore stroke: 150 mm drill capacity in cast iron: 30 mm spindle taper MT: MK3 spindle speed:: 200; 300; 500; 800; 1250; 2000 / 6 step U/min feed: manuell mm/U Distance spindle/table max.: 50 - 600 mm table clamping surface:: 330 x 300 mm table rotating: nein ° drill table adjustment: 550 (Handkurbel) mm column diameter: Ø 125 mm Ihedpfx Abeu Idkbe Tjw total power requirement: 1,5 kW weight of the machine ca.: ca. 300 kg dimension machine xH: 0,7 x 0,45 x 1,87 m Equipped with RÖHM Supra 3 - 16mm quick-action chuck Machine vice *

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Drechselmeister TWISTER XL woodturning lathe with a center distance of 800 mm. The demonstration machine is in its original condition, so you receive full warranty. Technical data - Center height: 250 mm - Swing over bed: 490 mm (up to 900 mm with optional outboard turning device!) - Center distance approx. 800 mm (extendable!) - Spindle fitting M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Frequency inverter (2 belt speeds): - 60 – 1,350 rpm and 150 – 3,600 rpm - Quill travel 150 mm (with scale), trapezoidal-thread leadscrew Ihodpfx Astpxx Ijb Tsw - Motor: 2 HP - Weight: approx. 290 kg The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Shipping via freight forwarder: Austria: € 125 incl. VAT Germany: € 150 incl. VAT South Tyrol: € 180 incl. VAT Related terms: woodturning machine, lathe, turning lathe, wood lathe, woodturning, woodturning tools, wood spinning, turning, machine Reference: R-A0117

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1230x490x2120 mm Weight 200 kg Ihedevz Hpcepfx Ab Tsw Total power requirement 1,5 kw

Condition: new, -Continuously adjustable sanding unit (0 - 90°) for vertical and horizontal sanding -Oscillating sanding belt for better sanding results and a longer service life of the sanding belt -Quick and easy sanding belt change via quick-clamping system Ihedpfxevxkv Ue Ab Tjw -Grinding sole with graphite coating as standard for a longer service life of the sanding belt -Work table made of gray cast iron adjustable via handwheel with T-slot -Including side sanding sleeve device for sanding curves and radii -Two suction nozzles Ø 100 mm -1x sanding belt 2750x 150mm grain 80 -1x sanding sleeve Ø38mm grain 80 -1x sanding sleeve Ø50mm grain 80 -1x sanding sleeve Ø75mm grain 80 Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg Extraction connection: - Extraction nozzle diameter: 100 mm Work table(s): - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz Grinding unit: - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt rotation speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding surface length: 1010 mm - Sanding surface width: 190 mm - Sanding height max.: 170 mm - Sanding unit swivel: 0 – 90 ° Workpiece: - Workpiece width max.: 1010 mm - Workpiece height max.: 150 mm - new exhibition machine -

Condition: good (used), Year of construction: 1987, Wood Lathe DHG 400/1000 Ijdpfx Asw Hl Adsb Tohw Length: 1000 mm Motor power: 0.75 kW Voltage: 220 Volt 6 spindle speeds: 180/300/400/700/1400/2800 rpm Weight: 70 kg Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1986, used, top condition cleaned, function checked, test run, manufactured by Hapfo type AP 1000 built in 1986 mach.-No. 44 top width ca.1000 mm top height ca. 200 mm 6-Zackmitnehmer live centre Isdevwf D Dspfx Ab Tjhw motor 0.75 PS revs 750 - 1500 - 3000 required space ca. l x w x h mm 1600 x 600 x 1400 located in 97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is a nearly new Teknatool Nova Neptune 190 DVR woodturning lathe with a centre distance of 457 mm. The demonstration machine is in its original condition and comes with full warranty. Technical specifications: - Centre height approx. 190 mm - Max. centre distance 457 mm (optionally extendable!) - Spindle thread M33 x 3.5 with ASR (Euro) runout safety groove* - Spindle and tailstock taper: MK2 - Infinitely variable speed (direct drive): 50 – 4,000 rpm - 24-step indexing function on the display - Motor: 1.5 hp (230 V) with forward and reverse operation - Tailstock quill stroke: 100 mm (with scale and handwheel with ball-bearing crank) - Four-prong drive centre, live centre, and double taper MK2 - Tool rest (upper tool rest) approx. 230 mm (with 25.4 mm post) - Faceplate 80 mm with ASR (Euro) runout safety groove* - Assembled machine weight approx. 60 kg The machine can be inspected at any time during our business hours. Subject to prior sale! Shipping by freight forwarder: Austria: €70.00 incl. VAT Germany: €80.00 incl. VAT South Tyrol: €100.00 incl. VAT Ihsdpfx Abeyk Dtzj Tjw Related terms: Lathe, woodturning lathe, turning machine, turning bench, turning, lathe chisel, woodturning, machine Reference: R-A0117

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1230x490x2120 mm Weight 200 kg Total power requirement 1,5 kw Iodpjvz Hmhofx Ab Tehw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2150x480x1330 mm Weight 230 kg Total power requirement 1,6 kw Ihsdpfxevz Eu Rs Ab Tew

Condition: excellent (used), For sale: Steady rest for lathe. Professional workshop equipment for stable guidance of long and heavy workpieces during machining. Solid cast iron construction – maximum rigidity and durability. Working opening approx. 150 mm (measured with caliper). Opening frame – quick and convenient clamping of the workpiece. Adjustable pins with sliding tips. Attachment to the lathe bed via a base with hole. The steady rest is intended for turning shafts, tubes, bars, and other long elements that require support during machining. Ijdow Sfpyjpfx Ab Tshw