Wood Chipper Shredder

Klöckner

Condition: ready for operation (used), Year of construction: 2021, clamping force: 2,700 kN, overall weight: 10,700 kg, Vertical injection moulding machine manufactured in 2021. This Kloeckner Desma D 969.250 Z (S3) features a clamping force of 2700 kN and an injection volume of 500 cm³. The machine is equipped with a high-pressure injection unit and a touch-operated control system for process monitoring. If you are looking to get high-quality injection moulding capabilities, consider the Kloeckner Desma D 969.250 Z (S3) machine we have for sale. Contact us for further details. - Clamping Force: 2700 kN (300 US tons)- Injection Volume: 500 cm³- Injection Unit Type: B500HP (High Pressure)- Injection Pressure: 3500 bar- Nozzle Contact Force: 58 kN- Control System: 2030 TBM (Touch operation / process monitoring)- Operating System Status: Active 3,360 hours- Operating Hours (Hydraulic Motor): approx. 730 hours- Operating Hours (Hydraulic Pump - Clamping Force): 65 hours- Total Current: 138 A- Recommended Backup Fuse: 160 A- Supply Cable Cross-Section: 70 mm² Cu- Voltage: 3~400 V +N +PE- Frequency: 50 Hz- Max. Short-Circuit Current: 10 kA- Total Machine Weight: approx. 10.7 t (10,700 kg) (Clamping Unit + Hydraulic Unit: 9,700 kg; Injection Unit: 1,000 kg)- Footprint: 10 m²- Total Floor Load / Ceiling Load: 1,070 kg/m²- Foot Area / Floor Contact Area: 2,010 cm²- Specific Ceiling Load: 5.3 kg/cm²- Hydraulic Oil Tank Volume: 450/130 l- Temperature Control Medium Tank Volume: 2x7 l- Compressed Air Pressure: 6 bar- Compressed Air Flow: 0.5 m³/h- Cooling Water Flow: 1.6 m³/h- Cooling Water Inlet Temperature: max. 20 °C at 2.5 bar- Cooling Water Connection: 22-L- Pump Power / Rated Power: 22 kW (28.6 hp)- Pump Current Consumption: 32.0 A- Pump Pressure: 265 bar- Pump Flow Rate: 72/39 l/min- Maximum Mold Width: 560 mm- Maximum Mold Length: 780 mm- Platen / Stroke Dimensions: 600 mm stroke, platen distance 1480 mm, clamping stroke details 710 mm- Heating Plate Center Bore / Ring Size: Ø80 H9- Enclosure Type (UL): 1 Ndsdpfxe Ad Inls Amtoc

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Nodpfxeqmi Irs Amtodc Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

Condition: excellent (used), Catalog number: 7649 TECHNICAL DATA inlet width: 900mm inlet height: 300mm shaft width: 1030mm shaft diameter: 700mm blade length: 1030mm number of blades: 3 pcs screen dimensions: 70x70mm from below, 2 toothed pulling shafts lower shaft motor: 7.5kW from above, 2 toothed pulling shafts upper shaft motor: 7.5kW Nodpfjzrm T Sex Amtedc belt conveyor apron feeder with chain belt 5600mm + 10600mm, 2.2kW feeder belt width: 800mm main motor: 90kW reverse gear overall machine dimensions (L/W/H): 3300x3100x1700mm shredder base dimensions: 3300x2080x1940mm feeder/apron feeder base dimensions (L/W/H): 5600x900x1000mm + 10600x1050x1600mm feeder belt base dimensions: 5100x1300x2520mm total weight approximately: 16000kg ADVANTAGES – German production – chain-type apron feeder, equipped with scrapers – reverse gear – DTR documentation – used shredder, very good condition Net price: 209900 PLN Net price: 48800 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with higher fluctuations)

Condition: excellent (used), Catalog number: 7411 TECHNICAL DATA - Inlet width: 400mm - Inlet height: 180mm - Shaft width: 430mm - Shaft diameter: 430mm - Blade length: 430mm - Number of blades: 2 pcs - Screen dimensions: 60x60mm - 2 toothed pull shafts from below - Lower shaft motor: 1.5kW - Toothed pull shaft from above - Upper shaft motor: 1.5kW - Belt conveyor - Length of feed belt: 2250mm - Width of feed belt: 400mm - Main motor: 30kW - Auto-reverse - Overall dimensions (L/W/H): 4300x1630x1000mm - Weight: 1800kg - Made in Germany Nedpfx Ajztq T Eemtsdc - Auto-reverse (adjustable) - Used shredder, very good condition Net price: 69900 PLN Net price: 16256 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Condition: like new (used), Year of construction: 2016, power: 200 kW (271.92 HP), overall weight: 7,500 kg, MEBOR multi-blade line with two drums, model VC700, manufactured in 2016. In very good working condition! Almost new. The multi-blade line includes: 1. Automatic feed conveyor with automatic positioning rollers. Ndsdpfx Amsy Sganjtoc 2. Loading ramp. 3. Unloading table with left/right sorting.

Condition: excellent (used), Catalog number: 7361 TECHNICAL DATA - inlet width: 400mm - inlet height: 180mm - shaft width: 430mm - shaft diameter: 430mm - blade length: 430mm - number of blades: 2 pcs - screen dimensions: 60x60mm - 2 geared drive rollers (bottom) - motor for bottom rollers: 1.8kW - 2 geared drive rollers (top) - motor for top rollers: 1.8kW - belt conveyor - length of conveyor belt: 2200mm - width of conveyor belt: 330mm - main motor: 22kW - auto-reverse - reverse gear - overall dimensions (L/W/H): 4100x1350x1100mm - weight: 1800kg ADVANTAGES – German-made – auto-reverse (adjustable) – reverse gear – used shredder, very good condition Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR Njdpfxsztq N Te Amtjdc (Prices may vary due to significant fluctuations)

Year of construction: 2005, condition: excellent (used), machine/vehicle number: DN-BD2-400A, Complete Klöckner Möller - Siemens BD2 - 400A busbar system available! Stock quantity: approximately 250 linear meters!!! Type BD2-400A / 400 Amperes - 5-pole - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Busbar length 3.25m Price per meter including connectors, end pieces, and mounting brackets Feed-in and tap-off boxes 16-32-63-125-250A are available as optional extras Dismantling was carried out by a qualified electrician. Busbars are in TOP condition!!!! Please inquire about the desired lengths or accessories! In stock, immediately available!!! Note: 100A, 160A, and 250A busbars are also available – please inquire!!! ----- Old Klöckner Moeller BD1 system still available! Busbars, corner pieces, feed-in and tap-off boxes for the old Klöckner Moeller BD1 / BD 1 system in stock!!! Please inquire! Ndjdpfx Aerfwnkomtoc Are you also looking for a crane system?

Condition: used, Year of construction: 1994, Edging machine / Double edger EWD Esterer Model: DK90 TL 1000 Year of manufacture: 1994 Maximum feed width: 1000 mm Maximum cutting height: 120 mm Total of 3 saw blades 2 saw blades adjustable Measurement system: Combimes With S-type conveyor With cross-cut saw With infeed unit Esterer ARS TR With 2-strip chip separator Machine can be fully overhauled upon customer request! Already dismantled and ready for loading at any time Ndedpfxjyam Exs Amtoc Location: Austria, near Leoben

Condition: excellent (used), Catalog number 7259 TECHNICAL DATA - Inlet width 400mm - Inlet height 200mm - Shaft width 530mm - Shaft diameter 550mm - Blade length 530mm - Number of blades 2 Ndsdpezrug Tofx Amtec - Screen dimensions 50x50mm - 2 toothed pull shafts from below - Lower shaft motor 2.2kW - Toothed pull shaft from above - Upper shaft motor 2.2kW - Belt conveyor 0.55kW - Belt conveyor length 3000mm - Belt conveyor width 410mm - Main motor 45kW - Automatic reversing - Reverse gear - Machine dimensions (L/W/H) 2900x1600x1600mm - Feeder dimensions (L/W/H) 3070x720x670mm - Weight approximately 3500kg ADVANTAGES - German-made - Automatic reversing (with adjustable settings) - Reverse gear - Used shredder, very good condition Net price: 85900 PLN Net price: 19977 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7240 TECHNICAL DATA - inlet width 400mm - inlet height 210mm - shaft width 530mm - shaft diameter 500mm - blade length 530mm Nodpfxszruhqj Amtedc - number of blades 2 pcs - screen dimensions 55x50mm - 2 geared pull shafts from below - motor for lower shafts approx. 3kW - geared pull shaft from above - motor for upper shaft 1.5kW - feeder belt length 4600mm - feeder belt width 400mm - main motor 55kW - auto-reverse - feeder dimensions (L/W/H) 4630x620x760mm - machine dimensions (L/W/H) 2510x1700x1200mm - weight approx. 3500kg - German production - auto-reverse (adjustable) - used shredder, very good condition Net price: 85900 PLN Net price: 19977 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: new, Year of construction: 2026, Drum chipper series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces Nsdpfx Aswbv Eromtjdc - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: excellent (used), CATALOG NUMBER 7897 Technical data: - inlet width 400mm - inlet height 160mm - shaft width 530mm - shaft diameter 530mm - blade length 530mm Nedpfx Amjzx Rnmetedc - number of blades 2 pcs - screen dimensions 65x65mm - toothed pulling shaft, bottom - lower shaft motor 2.2kW - toothed pulling shaft, top - upper shaft motor 2.2kW - belt conveyor - length of conveyor belt 2200mm - width of conveyor belt 400mm - main motor 45kW - auto-reverse (adjustable) - overall dimensions (L/W/H) 4400x1600x1630mm - weight approximately 3000kg ADVANTAGES - German-made - auto-reverse (adjustable) - DTR documentation - used shredder, very good condition Net price: 75900 PLN Net price: 17650 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Catalog number 7687 TECHNICAL DATA - inlet width 540mm - inlet height 300mm - shaft width 630mm Nedpfx Aszx Rngomtodc - shaft diameter 700mm - knife length 630mm - number of knives 2 pcs - screen dimensions 40x40mm - toothed pull shaft (bottom) - lower shaft motor 4kW - toothed pull shaft (top) - upper shaft motor 4kW - belt conveyor - length of feed belt 4720mm - width of feed belt 500mm - main motor 75kW - auto-reverse (adjustable) - overall machine dimensions (L/W/H) 3100x2000x1830mm - overall feeder dimensions (L/W/H) 4800x780x980mm - weight approximately 5000kg ADVANTAGES – German production – auto-reverse – used shredder, very good condition Net price: 120900 PLN Net price: 28116 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Year of construction: 2015, condition: refurbished (used), DCB Half gantry crane consisting of: 2 pcs 16 ton hoists. 2 support legs. The following accessories are included: 1 remote control with charger. 2 pcs weight display. Ndjdpfxohk I H Dj Amtoc Max hoist height: 12,4 meters. Lifting speed: 0.11-5.6. Classification: M5. Range: 21,792. Dimension crane guide rail: 80x60. Functional. In operation until week 12 2021. Dismantled week 12 2021. All annual inspections complied. The following accessories are included: crane folder with original documents, service reports, overview of ongoing maintenance. The following accessories are not included: Running rails + power rails. Master data Model and type 2x16 T MAX 22 T Chassis No. Unknown Year Estimated 2015 Max load KG 2x16 T MAX 22 T Weight KG 20,640 excl. legs. Transport can be arranged. Call or write to make an appointment for viewing. Client sale, Location: DK-7600 Struer.

Condition: excellent (used), Catalog number 7291 TECHNICAL DATA - inlet width 500mm - inlet height 200mm - shaft width 630mm - blade length 630mm - number of blades 2 pcs - screen dimensions 60x60mm - toothed pull shaft, bottom - bottom shaft motor 4kW - toothed pull shaft, top - top shaft motor 4kW - feed belt length 4100mm - feed belt width 400mm - feeder motor approx. 2kW - main motor 55kW - automatic reversing - feeder dimensions (L/W/H) 4670x760x720mm - machine dimensions (L/W/H) 2550x1800x1300mm - weight approx. 4000kg – German production Nodpfszwwpbjx Amtjdc - automatic reversing – used shredder, very good condition Original photos Net price: 118900 PLN Net price: 27651 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)