Filling machine 16 digits

Krones

Condition: used, Year of construction: 2001, Overview This Krones rinser-filler-capper block was manufactured in 2001 and consists of a Volumetic filling system combined with a Variojet rinser and a screw-capping machine. The machine is designed for PET multiway bottles (GDB PET-MW) in 1.0 L and 0.5 L formats. The system is equipped with 120 filling valves and 88 rinsing stations. The rinser operates with 2 rinsing channels, currently configured for ClO₂ and fresh water. The machine runs clockwise and achieves a production capacity of up to 32,000 bottles per hour at 1.0 L. The machine will be available from October 2026 and will be exchanged parallel to the installation of the new line.  Technical Data manufacturer: Krones model: Volumetic (filler) / Variojet (rinser) year of manufacture: 2001 filling valves: 120 rinsing stations: 88 rinsing channels: 2 (currently ClO₂ and fresh water) formats: 1.0 L GDB PET-MW 0.5 L GDB PET-MW POC 1810 closures production capacity: 32,000 bph at 1.0 L direction of rotation: clockwise availability: beginning of October 2026 Kwjdpfx Abeyluwts Tsu

Condition: like new (used), functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, gearing type: hydrostat, Year of construction: 2024, operating hours: 75 h, Agria 5900 Taifun Professional Hydro equipment carrier Technical details: Kawasaki 2-cylinder four-stroke petrol engine 23hp with electric start Gearbox: stepless hydrostatic drive with single-disk dry clutch Speeds: Forward: 0-7 km/h, Reverse: 0 - 3.6 km/h Steering bar: rubber-mounted and height and side adjustable without tools Steering: power steering (handle active steering) Tires: 23 x 8.50 - 12 AS Standard equipment: tires, service and parking brake, operating hour meter, manual start, electric starter, socket Fuel: unleaded petrol Weight: approx. 221.00 kg Kjdpfxov Ecdko Ab Tswu Special features: Intuitive steering with minimal effort thanks to Holm active steering Patented easy-control control unit for intuitive control Powerful professional motors guarantee sufficient power for all attachments Portal axle for shifting the center of gravity depending on local conditions and the attachment used Clearly visible even in poor visibility conditions thanks to LED safety lighting Standard support foot for convenient parking of the machine without an attachment Hydraulic safety valve: for secure hold even on steep slopes Optimized air intake reduces sucking in of dirt and dust Central parking brake Stepless hydrostatic drive for ideal adjustment of the working speed Robust and low-maintenance construction for continuous use under the toughest conditions Standard with operating hour counter Agria mounting flange for positive and non-positive connection between the base and attachment Powerful motors guarantee fast work with professional attachments Easy movement of the machine even without the engine running by releasing the wheels Possible Attachments Green space management: mowing, mulching, baling and belt rake Soil management: reversing tillers, harrowing Property and path maintenance: weed removal, snow clearing, snow blowing, spreading, sweeping Woodland maintenance: chopping bushes This Agria 5900 Cyclone Hydro tool carrier was built in 2024, has around 75 operating hours and has been used as a demonstration machine to date. The Cyclone is in as good as new overall condition, with minor signs of wear and tear, ready for immediate use. Sold as a used machine with no return, guarantee or warranty. Net price €18,479 // Gross price €21,990 - Inspection / test drive possible - Shipping costs €180 nationwide by freight forwarder! - Financing / leasing can be requested individually for you!

Condition: used, Year of construction: 2004, Overview This stretch blow moulding machine was manufactured in 2004 by German company KRONES. The machine is a CONTIFORM S8, designed for PET bottle production and configured for PCO 1881 and Alaska neck finishes. The blow moulder is immediately available. Technical data  Capacity: Max. 13,600 bph Formats: 0.50 L 1.00 L 1.50 L Neck finish: PCO 1881 Alaska Number of cavities: 8 moulds Operating hours: Approx. 35,000 h Scope of Delivery  KRONES CONTIFORM S8 stretch blow moulding machine Preform hopper and feeder Chiller 6 sets of moulds Spare parts Kedpfsylacuox Ab Tjwu

Condition: used, Year of construction: 2010, Overview  This bottle washer was manufactured in 2010 by German company KRONES AG. The LAVATEC 358 was operated on 330 ml bottles, achieving a maximum speed of 66,000 bph with a nominal speed of 43,000 bph. The machine is stopped since September 2025, still installed with energy disconnected, and can be visited on request. It has 48,121 operating hours. Regular maintenance was carried out (two overhauls per year), with the last overhaul in week 4/2025. No upgrades were made apart from replacing obsolete parts. Technical data Capacity: Max. 66,000 bph Nominal 43,000 bph Formats: 330 ml Application: Bottle washing Operating hours: 48,121 h Kwedpfxsyi Aywj Ab Tou

Year of construction: 2026, condition: new, The semi-automatic filler is the perfect solution for small companies that produce up to 5000 bag-in-boxes per year. The system is equipped with: an electromagnetic flow sensor; an electronic control panel - for programming the filling quantity (minimum 1 liter) and - for performing the calibration; and a self-priming pump with a EURO 20 rubber impeller. At the beginning and at the end of the cycle, the vacuum should be controlled by the user and the injection of nitrogen should be managed by means of two manual pulsar valves. The valve is opened and closed using the two stainless steel tools supplied as standard. Drip collector buffer is included in the scope of delivery. The user selects the desired filling quantity and turns the switch on to start the filling cycle. The filler performs a complete cycle: Opening the valve / Starting the pump / Stopping the pump / Closing the valve. - Touch screen operation for programming capacity and calibration; - Digital flow meter max. 7000 l/h - Stainless steel filling head - Pulse valve for manual nitrogen injection - Blocking system for the filling head - Drip-free filling - Automatic start and stop - Double semi-automatic system for opening and closing the connection - Capacity for filling flexible bags or pouches (high or low type) from 1 liter capacity - S/S- Suitable for cleaning circuit (CIP) Technical data: - Electrical requirements: 220V 50-60 Hz Kedpstpxtuefx Ab Towu - Suitable for: Ø 20 - 25 mm - Capacity: 5 lt/h 150 pcs. - Capacity: 10 lt/h 100 pcs. - Capacity: 20 lt/h 40 pcs.

Condition: used, Year of construction: 2012, Overview  This isobarometric bottle filler was manufactured in 2012 by German company KRONES. The MODULFILL ISO is equipped with 144 filling valves and 24 closing heads (pitch 95 mm). The machine was operated on 330 ml bottles at 43,200 bph and is designed for up to 50,000 bph on this format. The filler is still installed with energy disconnected, stopped since September 2025, and can be visited on request. The machine has 48,121 operating hours. Regular maintenance was performed (two overhauls per year), with the last overhaul in week 4/2025. No upgrades were made apart from replacing obsolete parts. Technical data Capacity: 43,200 bph on 330 ml (designed up to 50,000 bph) Formats: 330 ml Filling type: Isobarometric Neck finish: Crown / Twist-off Configuration: 144 filling valves 24 closing heads Pitch: 95 mm Operating hours: 48,121 h Dimensions: approx. 12 m × 8 m Kwodpfx Ajyigh Ajb Tou

Condition: used, Year of construction: 2012, Overview  This cold glue labeller was manufactured in 2012 by German company KRONES AG. The TOPMATIC is equipped with 42 bottle stations (pitch 125 mm) and was operated on 330 ml bottles. The machine is still installed with energy disconnected, stopped since September 2025, and can be visited on request. It has 48,121 operating hours. Regular maintenance was carried out (two overhauls per year), with the last overhaul in week 4/2025. No upgrades were made apart from replacing obsolete parts. Technical data  Capacity: Max. 60,000 bph Nominal 43,000 bph Formats: 330 ml Labelling technology: Cold glue Configuration: 42 bottle stations Pitch: 125 mm Inspection: Label inspection system CHECKMAT (Krones) Dimensions: approx. 430 × 340 × 245 cm Power supply: 400 V, 20 A, 14 kW Kwodpjyidmcjfx Ab Tou

Year of construction: 2007, condition: used, Plant: Mobile sludge dewatering plant, decanter / centrifuge mobile Manufacturer:Hiller Model: Solid bowl screw centrifuge Type: DP51 Machine No.: H3991 Year of construction: 2007 Maximum permissible: Drum speed 3400 I/min Inner diameter of bowl: approx. 505 mm Reel material: ST52,0 drum wall thickness:13,0 mm Other: steel exchange case with reinforced bottom, Accessories: pump for sludge inlet, flocculant suction pump, flocculant discharge pump Flocculant station: 2 chamber system for liquid polymers with agitator , adjustable Double shaft paddle mixer: galvanized steel Total mass: approx. 4200 kg Kwedpfsppucaox Ab Teu Purchase and rent possible.

Condition: used, Year of construction: 2015, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  manufacturer: Krones, Germany model: Contiroll HS 810-720     year of manufacture: 2015 neck handling machine, modification possible formats: 1,5L and 2,0L labelling applicators: 1 (wet-glue head), 2 magazines operation Direction: Right-machine,  production Capacity: 50.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Kedpfoyhgwdjx Ab Tewu

Condition: used, Year of construction: 2015, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  manufacturer: Krones, Germany model: Contiroll HS 810-720     year of manufacture: 2015 neck handling machine, modification possible formats: 1,5L and 2,0L labelling applicators: 1 (wet-glue head), 2 magazines operation Direction: Right-machine,  production Capacity: 50.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Kedpfjyhgvgjx Ab Tjwu

Condition: excellent (used), Filling machine Kjdpfjhbrxxox Ab Tewu Pos. number: LTC00004923 Make: King Type: automatic 6 head inline filling machine Model: KT 340 / ILKT Serial number: 6-2117701 / 214904 Frame: stainless steel Dimensions: L x W x H = 2.750 x 1.600 x 2.000 mm Weight: 700 Kg Capacity: up to 4.000 fillings per hour (depending on filling volume and product) with 1 liter you get about 1.200 fillings per hour. Power supply: 380 Volt - 50 Hz - 3.0 kW Features: volume tank machine fills with pulses, so a wide filling volume range fully adjustable with / without bottom filling 1-6 cups separately adjustable Note: machine in perfect condition

Condition: used, Year of construction: 2008, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  manufacturer: Krones, Germany model: Contiroll year of manufacture: 2008 labelling applicators: 2 (wet-glue heads) operation Direction: Right-machine, parallel on one side of the machine production Capacity: 45.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Kwedpfoyhgqqsx Ab Teu

Condition: used, machine/vehicle number: M304, Krones PET Block 54/8 Monobloc Filler–Capper – Overview The Krones PET Block 54/8 is a second‑hand monobloc composed of a rotary isobaric filler and rotary screw capper for PET bottles. Engineered for beverage production and industrial packaging, this unit is ideal for integrating into a used bottling line requiring counter‑pressure filling and PCO 1881 closure application. With 54 fixed filling valves and an 8‑head capper, it delivers reliable performance on large PET formats with precise neck handling. Technical Specifications & Performance Data Configuration: Monobloc Filler–Capper (filler + capper; no rinser module) Filling technology: Isobaric, fixed-valve counter‑pressure Number of filling valves: 54 Valve pitch (center distance): 126 mm Capper: 8-head rotary screw capper for plastic closures Neck finish: PCO 1881 (short finish) – plastic screw caps Bottle materials: PET Nominal capacities: 1.5 L = 9,000–10,000 bph; 3.0 L = 7,000–8,000 bph Machine rotation: Clockwise Overall dimensions: L 3.8 m, W 3.2 m, H 2.65 m Approx. weight: 7,500 kg Reference: M302 Module Details Filler carousel: 54 valves, designed for carbonated beverages and counter‑pressure operation; suitable for still beverages with inerting depending on product setup. Capper turret: 8 capping heads optimized for PCO 1881 plastic screw caps; consistent application torque and bottle neck handling for PET containers. Advanced Automation & Control Systems PLC platform: Siemens S7 for process control, diagnostics and integration. Signal and I/O: Provision for standard digital signals to synchronize with upstream/downstream equipment on a used bottling line. Process control: Counter‑pressure phases managed via PLC for stable fill levels and CO₂ retention. Production Line Integration Capabilities Line compatibility: Ideal for beverage production environments seeking to upgrade or expand a second hand industrial packaging line. Upstream equipment: Can interface with external bottle rinsers or blow molding machines (not included). Downstream equipment: Compatible with conveyors, labellers, packers and palletizers. Handling system: PET neck handling for stable transfer between filler and capper. Machine Condition & Maintenance History Status: In storage; filler dismantled and stored. Operating readiness: Operating after scheduled service/maintenance. Power: Not connected. Operating hours: Not set. Typical availability: Unit can be prepared for dispatch after service with a standard lead time. Operational Performance & Versatility Process benefits: Isobaric fixed-valve design supports low-foam filling, minimized oxygen pickup and consistent fill volumes on large PET formats. Format range: Optimized for 1.5 L and 3.0 L bottles; additional formats possible subject to parts and changeover kits. Closure system: Reliable application of PCO 1881 screw caps for CSD, sparkling water and other carbonated beverages. Kwedpfx Asyhcgbjb Teu Installation Requirements & Site Preparation Footprint: 3.8 × 3.2 m; recommended service clearance aroun...

Condition: new, Year of construction: 2025, MG20B is suitable for bending your steel into the desired shape. Product information: Kedpfx Abem Sgx Dj Towu - Voltage: 380 V (optional with 220 V available) - Motor Power: 1,5 kW - Dimensions Machine: 60cm x 45cm x 32cm - Dimensions Machine frame: 57cm x 44cm x 60cm - Ideal for your construction company or also for your construction sites - Easy to carry - In addition to the individual bending process, a bending sequence can also be programmed - Stirrup head for different reinforcing steel Ø are included in the accessories (incl. accessories, see pictures) - Possible in automatic or manual mode - Bending capacities depending on steel strength according to table (see pictures) - Optional available with digital control panel - Net weight: 95 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Year of construction: 1991, condition: ready for operation (used), The filling line includes (1) Empty Glass Lifter Kettner Presant Super, year of construction: 1990 (2) Rinser Krones Gripstar, year of construction: 1991 (3) Filler Krones FKVCF 110, year of construction: 1991 (4) Natural Corker Bertolaso Delta 416S, year of construction: 1991 (5) Cork Conveyor (6) Wiring Machine Kematec Dratomat 20, year of construction: 1991 (7) Depalletiser Schneider EPA 211, year of construction: 1991 (8) Depalletiser Schneider EPA 505, year of construction: 1991 (9) Capsule Machine Robino Zenith 2-32 Otticoo, year of construction: 1991 (10) Labeller Krones Solomatik 20-8-4, year of construction: 1982 (11) Case Packer Kettner Robot BE3/CT, year of construction: 1990 (12) Paternoster for case transport (13) 2x Case Erector Kettner KAF 2400 F, year of construction: 1996 (14) Capper Kettner HD 2500, year of construction: 1990 (15) Pallet Loader Kettner Pressant Universal, year of construction: 1990 (16) Binder Born HB R 240/430, year of construction: 1990 (17) Pallet Roller Conveyor (18) Roller Conveyor, output: 18,000 bottles/h, with documentation, suitable for champagne botttles, the line has not been used for 10 years. Kwsdpsk Nm Nrsfx Ab Tou