Molecular filling device

Lisec A4AL

Condition: ready for operation (used), Year of construction: 2008, • Glass thickness (mm): up to 30 • Glass height (mm): up to 2000 Itedpfx Aboxgtqgs Tod • Cleaning brushes: 4 front and 4 rear

Condition: ready for operation (used), Inkjet printer for frame bending machine Length: 800mm Width: 1000mm Height: 1900mm Ijdpfxjhzgtus Ab Tstd Weight: about 100kg

Condition: used, Year of construction: 2009, Sawblade tiltable 45 ° Isdpfx Asxcp N Deb Totd Length of the rolling table 1800 mm cutting width 250 mm Motor output 2,5 kW Cutting height 80 mm Cutting height at 45° 53 mm Saw blade diameter 250 mm Speed 3800 U/min. weight of the machine ca. 100 kg Equipment: - Extraction system - Saw blade - Parallel guide - Operating instructions

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Hydro 3000.6 Max. Glas-height: 3.000 mm Thickness: 3-22 mm Itsdjwd N Urjpfx Ab Tjd Prewashingzone / Mainwashingzone / drying zone Stainless steel body 6 brushes (150 mm) maid out of one piece with Incl. water tanks incl. vacuum system for drying zone LED lights on the outled for inspection

Condition: like new (used), Year of construction: 2002, functionality: fully functional, total length: 3,000 mm, total width: 800 mm, total height: 1,000 mm, input voltage: 400 V, overall weight: 850 kg, type of input current: three-phase, Manual Lisec butyl extruder LBH-25V, year 2002, fully overhauled (technically and optically), for profile widths 6-24 mm, 2 butyl storage cylinder for x 7,5 kg butyl. The machine will be available by the late in February / early in March 2026. Itodpfjydc Nnsx Ab Tjd Please note: the photos show the same type extruder after our last overhaul.

Year of construction: 1995, condition: good (used), The bender can bend aluminum and plastic, Itodpfx Asrif U Esb Ted Total length: approx. 11500 mm, depth: 1600 mm.

Year of construction: 1991, condition: good (used), machine/vehicle number: 154.03.10.01.0291, Giętarka do ramek dystansowych Lisec BSV-45 wraz z podajnikiem do ramek oraz drukarką. Min. wymiar ramki: 250 x 150 mm Max. wymiar ramki: 3000 x 2200 mm Napięcie: 380-3/N~50Hz Złącze: 10 kW Itjdjg D Hdpopfx Ab Tjd Ciśnienie: 6 bar Waga: 1125 kg Gwarancja rozruchowa.

Condition: new, Year of construction: 2025, Band width: max. 38 mm Feed length: max. 50 mm Band thickness: 0.05...1.02 mm Stroke rate: max. 260 rpm at full feed length Feed force: 90 N Itjdpfx Ao Ea U Hob Tod Optionally with mechanical control valve or optionally with electric valve (24V or 230V) Many other band widths and feed lengths available.

Condition: good (used), Sanding machine for straight edges; for sanding and fine polishing straight edges, miters and phases Iodpju U H H Aofx Ab Totd Data: - Glass thickness 3-25 mm - Min. dimensions: 80 x 120 mm - Max. Dimensions: 3 x 3 meters - Mitres 0-60° - Power: 15kW - Dimensions: Length 6.5 meters - Width with water tray 1.6 meters - Height 2.5 m meter - Feed speed: 0.4 - 4.2 m/min. - Weight: 2600 kg Price on request

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. Iteder Ak Exjpfx Ab Ted There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.