Hydr. pressbrake

LVD PPBL-100-30

Condition: new, Model Name Cjdpfjgvqzcex Aftogp Airtower FT 20.000

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,089 h, stroke length: 300 mm, number of axes: 6, travel distance X-axis: 600 mm, overall weight: 6,400 kg, total height: 2,810 mm, travel distance Y-axis: 300 mm, pressing force: 102 t, product length (max.): 4,175 mm, This servo-electric SAFAN E-Brake 100-3100 press brake was manufactured in 2021. It offers a pressing force of 1000 kN and a bending length of 3060 mm. The machine is equipped with a CNC-controlled backgauge with X, R, Z1, and Z2 axes. If you are looking for high-quality bending performance, consider the SAFAN E-Brake 100-3100 that we have for sale. Contact us for more information • Throat depth: 590 mm • Control system: CNC – EC 20 • Upper beam stop time: < 92 ms • Safety distance (light curtain): ≥ 185 mm • Electrical supply: 3 × 400 V / 50–60 Hz / N / PE • Connected load: Max. 11 kW Additional equipment • Tools visible in the photos are not included but can be sold with the machine for an additional fee. Technical Specification Bending Length 3060 mm Codpox D Eanefx Aftsgp Dimensions Machine Depth 2140 mm

Condition: new, feed pressure 11 bar Cgedpfxevkizgj Aftep intake capacity 480 cm³ volume capacity 360 Receiver capacity 270 l / bar Number of cylinders 1 Stk. motor 400Volt / 3,0KW V / KW turning speeds 892 U/min weight of the machine ca. 200 kg. range L-W-H 1,6 x 0,7 x 1,2 mm

Condition: good (used), functionality: fully functional, Year of construction: 2000, CNC press brake, 6 axes - Pressing force: 1,300 kN - Bending length: 3,060 mm - Number of axes: 6 programmable (X1, X2, R1, R2, Z1, Z2) - Y-axis rapid traverse: 200 mm/s - Y-axis working speed: 11 mm/s - Y-axis return: 135 mm/s - Travel speeds: X - 500 mm/s, R - 300 mm/s, Z - 1,000 mm/s - X-axis travel: 600 mm - Max. back gauge range X: 860 mm - R-axis travel: 250 mm - Y-axis stroke: 365 mm - Installation height: 535 mm - Y-axis tilt: ±10 mm - Bending length: 3,060 mm - Clear distance between uprights: 2,690 mm - Throat depth: 410 mm - Table width: 120 mm - Working height: 1,050 mm - Oil capacity: 250 l Dimensions: Cedsx S H Uxjpfx Aftjgp Width: 3,640 mm, Depth: 2,210 mm, Height: 2,885 mm Weight: 12,950 kg The machine can be inspected under power!

Condition: used, Year of construction: 1999, pressure 130 t chamfer lenght 3550 mm distance between columns 3060 mm dayligth 510 mm Control Cybelec DNC 80 throat 320 mm stroke 250 mm work height max. 900 mm weight of the machine ca. 12000 kg dimensions of the machine ca. 4,05x2,1x2,85 m Control Cybelec DNC 80 Y1;Y2;X;R axis Die shift with hand wheel 4 stop fingers hydraulic stamp clamping WILA Csdjvxwqfopfx Aftogp hydraulic die clamping System Amada 2 pcs. support arms saftey 2-hand / foot operation Various stamps and matrices

Condition: good (used), Year of construction: 1997, machine/vehicle number: 885258, Offer 25514 Technical Data: - Max. working length: 3060 mm - Frame opening: 2690 mm - Max. pressing force: 1300 kN - Max. distance table/ram: 535 mm - Throat depth: 410 mm - Ram stroke: 215 mm - Stroke speeds: - Downward idle speed: max. 200 mm/sec - Upward speed: 135 mm/sec - Pressing speed (downward): 1 to 11 mm/sec Cgsdjx Ew Dqepfx Aftep - Total drive power: 18 kW - Pneumatic connection: 6 bar - Required space: approx. W 3800 x H 2700 x D 2400 mm - Weight: approx. 11,500 kg Features: - 6-axis CNC control system DELEM - Two-hand control panel with foot pedal - Crowning system - CNC-controlled backgauge with height adjustment 5 - 860 mm - Hydraulic upper and lower tool clamping - Pneumatically assisted die table shifting

Year of construction: 1990, condition: good (used), machine/vehicle number: V 254xxx, Lg. no. 22462 Technical data: - Cutting length 250 mm Cgedpfjiluqmox Aftop - cutting angle 90 ° - Cutting thickness - mild steel up to 4 mm - Stainless steel up to 3 mm - Aluminum up to 5 mm - stroke rate up to approx. 55 /min - table size W 800 x D 800 mm - working height approx. 940 mm - stops steplessly adjustable in length and degrees - drive 400 V / 4 kW - oil filling 50 l - E - foot switch - space requirement approx. W 800 x H 1250 x D 900 mm - weight approx. 700 kg

Condition: used, Year of construction: 1998, Pressure 130 t Bending length 3550 mm Column width 3050 mm Codpfxswgkwtj Aftsgp Stroke 250 mm Cybelec control system Machine weight approx. 11,600 kg Space required approx. 4000 x 2000 x 3000 mm Accessories/Equipment: - CYBELEC DNC 70 control system - 2 support arms - 2-hand foot control - Wila tool holders, top and bottom - Crowning - Side guards - 4 manually adjustable stop fingers - Controlled axes: y1, y2, x, R

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, control type: CNC control, degree of automation: automatic, controller manufacturer: ESA, controller model: ESA S550N, bending force (max.): 135 t, working width: 3,050 mm, stroke length: 400 mm, operating speed: 200 mm/s, number of axes: 8, type of crowning: CNC-controlled, oil tank capacity: 150 l, travel distance X-axis: 625 mm, back gauge adjustment: CNC-controlled, back gauge speed R-axis: 50 mm/s, back gauge travel distance R-axis: 180 mm, back gauge travel distance Z-axis: 2,100 mm, overall weight: 9,500 kg, number of support arms: 2, pressing force: 135 t, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, A very well-equipped machine with Y1 / Y2 / X / X1 / R / Z1 / Z2 axes and hydraulic upper and lower tool clamping. The control unit has just been overhauled by the manufacturer, and the machine works flawlessly. Cjdpfxowqhw Ee Aftogp

Condition: ready for operation (used), Year of construction: 2004, pressure 60.0 t chamfer lenght 2600 mm distance between columns 2050 mm column arm 310 mm working feed 10.0 mm/sec return speed 61.0 mm/sec stroke 100 - 140 mm dayligth 450 mm table height 860 mm oil volume 100 ltr. Control ELGO P8822 operating pressure max. 200 bar Number of working hours ca. 2.370 h voltage 380 V total power requirement 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 3000 x 1850 x 2050 mm good / well-maintained condition (!!) with only approx. 2,370 operating hours current new price approx. 60.000 euros special price on request in checked conditions - machine video - ?v=PsUeM3O5wAM Equipment: - NC electro-hydraulic press brake - with ELGO NC control unit "P8822" * Input of target/actual values ??for back stop * Input of target/actual values ??for depth adjustment ` * swiveling operation, front left * manual mode selectable - NC controlled axes: Y1 + Y2 + X - NC electro-motorized back stop, on ball screws * with 4x manually adjustable stop fingers * adjustment in R+Z axis (manual) - Upper tool holder SYSTEM A (AMADA), with upper wedge crowning * 1x split set of upper tools * clamping jaws with clamping lever (quick clamp) - 1x universally rotatable MULTI V die block - 2x side-hinged doors (protective device) - 1x rear sliding door (protective device) - 2x front stable support arms - 1x freely movable foot control (on rollers - movable) - Operating instructions (PDF) Cgodpfx Afow U U Ttjtep