Run press

LVD PPEC-7 135/30

Condition: excellent (used), Year of construction: 1999, Technical Data: Working length: 3050 mm Distance between uprights: 2690 mm Pressing force: 130 t CNC control: DELEM Bedpow Tcncefx Ab Ujlf Adjustable backgauge Controlled axes: Z1 / Z2; X; R CNC-controlled crowning Installation height: 535 mm Stroke: 365 mm Throat depth: 410 mm Hydraulic tool clamping top and bottom Ram position measuring system with spring-back compensation via glass scales Program-controlled lower tool shifting (I-axis) for 2 positions Motor power: 12.5 kW Number of backgauge fingers: 2 CE mark Dimensions (L x W x H): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tonnes Condition: Good condition The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, operating hours: 17,446 h, power: 11 kW (14.96 HP), input voltage: 400 V, oil tank capacity: 130 l, total length: 3,300 mm, total width: 2,000 mm, total height: 2,440 mm, overall weight: 8,900 kg, controller manufacturer: DELEM, controller model: DA65, working width: 3,100 mm, bending force (max.): 110 t, control type: CNC control, number of axes: 8, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, For sale: Used press brake DARLEY EHP-L 110 31/25, year of manufacture 2000. The machine is in excellent technical condition and is highly reliable. Very precise and offers repeatable results. In December 2023, all cylinder seals as well as the hydraulic oil and filters were replaced. In February 2024, the upper WILA tool clamping system was serviced. The machine has very few operating hours. Hydraulics: Hoerbiger Machine number: 122067 Machine type: EHP-L 110 31/25 Year of construction: 2000 Blodpjx N Ibhjfx Ab Uef Maximum pressing force: 1100 kN Working length: 3100 mm Power: 11 kW Voltage: 400 V Hydraulic oil tank capacity: 130 l Hydraulic system pressure: 28 MPa Weight: 8,900 kg Tooling type: Hydraulic Wila / Trumpf Control: DELEM DA65 Number of axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 + crowning compensation If you have any questions or would like more information, please send us a message or contact us by phone.

Condition: used, Used CNC press brake from Ermaksan Type: CNC AP 3100 120 Capacity: 3100 x 120 tons Bledexnp S Nspfx Ab Ujf Delem DA66w graphical control CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Crowning system Euro tool clamping with 1 set of tools Year of manufacture: 2006

Condition: used, Year of construction: 2008, pressure 120 t chamfer lenght . mm distance between columns 2550 mm stroke 200 mm total power requirement 13,2 kVA Number of working hours 2500 h workpiece 1 Satz Standart workpiece 1 Satz Standart Prisma Number of strokes 11000 weight of the machine ca. 8,3 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Bodpfx Ajyqvfcjb Ujlf apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 205 h, working width: 3,000 mm, control type: CNC control, degree of automation: automatic, For Sale: Salvagnini B3 ATA 135/3000 – Year 2017 A high-performance Salvagnini B3 ATA 135/3000 hybrid press brake from 2017 is available for sale. This model combines the precision of electric actuation with hydraulic power, ensuring rapid setup times, low energy consumption, and outstanding repeatability. Equipped with the ATA (Automatic Tool Adjuster) system, it is ideal for production environments requiring frequent tool changes and short-run batches. Key Features: - ATA Automatic Tool Adjuster for rapid tool configuration - Hybrid technology: energy-efficient, quiet operation, and excellent accuracy - High repeatability and fast cycle times - Suitable for both small-batch and serial production - Robust frame and premium Italian engineering Technical Specifications: - Maximum bending force: 135 tons - Working length: 3000 mm - Table length: 3060 mm - Distance between side frames: 2640 mm - Throat depth: 435 mm - Approach/return speed: 250 mm/s - Bending speed: 15 mm/s - Maximum stroke: 350 mm - Table–ram opening: 600 mm - Total machine length: 4310 mm - Overall width: 1735 mm Bledpfx Aoxykxneb Usf - Overall height: 3295 mm - Average energy consumption: 1.5 kWh - Machine weight: 11,700 kg - Year of manufacture: 2017 Highlights: - Quick setup thanks to ATA system - Very low operating costs - Hybrid drive ensures smooth operation and precise bending - Ideal for subcontractors, metal fabrication, and flexible production lines

Condition: used, Year of construction: 1992, pressure 125 t chamfer lenght 3000 mm distance between columns . mm Control CNC type DA 65 R stroke 200 mm Bledpfx Absyqvc Ie Uef safety distance 136 mm rapid traverse - down 100 mm/sec rapid traverse - up 92 mm/sec working feed 1-10 mm/sec weight of the machine ca. 13 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, power: 15 kW (20.39 HP), total length: 4,100 mm, total height: 2,500 mm, overall weight: 8,800 kg, controller manufacturer: rB, control type: CNC control, actuation type: hydraulic, Equipment: CE marking, finger protection, foot remote control, lower tooling, upper tooling, HACO Press Brake ERM 36135 135 Ton Technical condition: Good Bending length: 3600 mm Bljdsymxcvopfx Ab Uef Tonnage: 135 T Type of press brake: CNC Back gauge: Y1 + Y2 + X + R+Z/Z CNC controlled Back gauge length: 800 mm Crowning: yes, CNC controlled Daylight: 400 mm Throat depth: 250 mm Stroke: 200 mm Control: BC 59 T graphical 2D control Fiesssler safety system (New) Motor power: 15.0 kW 400V Top tooling: multiple sets Bottom tooling: multiple sets Tool clamping: European standard Serial number: 82414 Year of manufacture: 2005 Total width: 1700 mm Total height: 2500 mm Total length: 4100 mm Weight: 8800 KG

Condition: used, Year of construction: 2001, pressure 130 t chamfer lenght 3060 mm distance between columns 2690 mm Bledpfx Abeyn R Hvs Usf column arm 410 mm stroke 365 mm dayligth 535 mm ajustment speed 200 mm/sec working feed 1.0 - 10.0 mm/sec return speed 135 mm/sec table width 120 mm table height 1050 mm tiltable up to +/- 10.0 mm Number of working hours ca. 31.800 h compressed air 5.0 - 7.0 bar oil volume 250 l operating pressure 340 bar voltage 400 V total power requirement 23.0 KVA weight of the machine ca. 12950 kg range L-W-H 3660 x 2310 x 2900 mm Equipment: - CNC electro-hydraulic folding/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tools and products library * Graphical 2D programming * automatic bending sequence calculation and collision detection * EMERGENCY stop button at the front - CNC axis adjustment: * Y1 - Y2 - X - R axis CNC crowning * Manual adjustment of the 2x stop fingers, from the front (Z axes) - CNC electro-motorized table crowning - CNC electro-pneumatic die displacement (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x free-moving foot switch - Lateral safety device (hinged doors) - rear safety device (sliding doors) - original operating instructions ( french )