Anvil with rounded horn and rectangular horn; anvil in North German design, pointed horn

160

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 020033, spindle speed (max.): 5,000 rpm, spindle diameter: 110 mm, controller model: Siemens SINUMERIK, empty load weight: 11,000 kg, counter spindle speed (max.): 5,000 rpm, The machine is expected to be available for approximately €4,000, including loading onto a truck (FOB). TECHNICAL DETAILS Working area X1-axis: 1,190 mm Working area Y1-axis: 120 mm Working area Z1-axis: 260 mm Working area X3-axis: 540 mm Working area Y3-axis: 120 mm Working area Z3-axis: 260 mm Handling space X1-axis: 490 mm Axes and Feed Feed force X1/Z1/Y1: approx. 8/10/10 kN Feed force X3/Z3/Y3: approx. 8/10/10 kN Rapid traverse speed X1/Z1/Y1: approx. 80/40/7.5 m/min Rapid traverse speed X3/Z3/Y3: approx. 40/40/7.5 m/min Acceleration X1/Z1/Y1: 7/7/7 m/s² Acceleration X3/Z3/Y3: 7/7/7 m/s² Spindle Speed at main and counter spindle: 5,000 RPM Power at 100% duty cycle, main spindle: 20 kW Torque at 100% duty cycle: 105 Nm Power at 40% duty cycle: 27 kW Torque at 40% duty cycle: 145 Nm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose diameter (cylindrical): 140 mm Hydraulic full-stroke cylinder OVS80 - Main spindle Piston stroke: 32 mm Piston area: 34.36 cm² Clamping pressure: 8 to 80 bar Tensile or compressive force at 80 bar: max. 27.2 kN Leakage oil volume at operating pressure 80 bar: max. 2.2 l/min Hydraulic full-stroke cylinder OVS65 - Counter spindle Piston stroke: 32 mm Piston area: 26.1 cm² Clamping pressure: 8 to 100 bar Tensile or compressive force at 100 bar: max. 26.1 kN Ledpfozdqdfjx Abneac Leakage oil volume at operating pressure 100 bar: max. 3 l/min Y-axis Slide travel: 120 mm Feed force: 10 kN Rapid traverse: 7.5 m/min Resolution: 0.05 mm Speed of driven tools: 6,000 RPM MACHINE DETAILS Control system: Siemens SINUMERIK Unloading device Swivel angle: 90 degrees Swivel time: 2 s Slide travel: 100 mm Rapid traverse speed: 6 m/min Workpiece weight: approx. 10 kg Workpiece diameter: 200 mm Electrical data Rated power: 45 kW Apparent power: 53 kVA Rated current: 76 A Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight Dimensions with chip conveyor (L x W x H): 2,770 x 4,435 x 2,750 mm Weight: approx. 11,000 kg EQUIPMENT Two tool holders with 12 tool positions each, VDI 30 Note: Further technical data can be found in the attached data sheet. The machine is not equipped with a B-axis.

Condition: used, Year of construction: 2003, turning diameter max. 420 mm turning length 1090 mm control FANUC Serie 18i-TB turning spindle Durchlass 108 mm 250 / 315 turning speed range 0-3750 U/min Feed speed 18/24 m/min. workpiece 12 quill stroke 100 mm diameter of quill 110 mm taper MK 4 number of driven tools 12 mm Lsdpfeucgyljx Abneac turning speeds 3000 U/min 22 nm coolant tank 140 l total power requirement 22/18,5 kW weight of the machine ca. 6500 KG

Condition: used, Year of construction: 1969, max. wheel diameter 160 mm gear width 355 mm max. module 4,5 min. module 0,5 centre distance 450 mm total power requirement 11 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2x17,1,6 m Wheel diameter - max. 160.175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Center distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Center distance between milling cutter and workpiece - max. 138 mm Center distance between milling cutter and workpiece - min. 30 mm Milling head - swivels 120 ° Milling cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Ljdsvz Ec Iopfx Abnjac Equipment/accessories: - Changing wheels - milling arbors - Clamping device Dra8M7 - documentation

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, controller model: HEIDENHAIN TNC 530, workpiece weight (max.): 4,000 kg, overall weight: 35,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, spindle nose: SK 40 (DIN 69871), number of slots in tool magazine: 60, CNC Machining centre DECKEL MAHO DMU 160 P TECHNICAL CHARACTERISTICS: Year of manufacturing: 2008 CNC control: HEIDENHAIN TNC 530 Number of simultaneous axes: 5 Stroke X axis: 1600 [mm] Stroke Y axis: 1250 [mm] Stroke Z axis: 1000 [mm] Feed rate on X, Y and Z axes: 15000 [mm/min] Traversing feeds X, Y and Z axes: 60000 [mm/min] Table dimensions: Ø1500 x 1250 [mm] Max. load on table: 4000 [Kg] Spindle type: SK 40 (DIN 69871) Min. spindle speed: 20 [rpm] Max. spindle speed 12000: [rpm] Tool changer magazin number of stations: 60 Machine weight: 35000 [Kg] Lodpfxezggmbe Abneac INCLUDED EQUIPMENT: 1 × HEIDENHAIN part probe 1 × laser measuring system for tool setting and tool monitoring 3 × HEIDENHAIN linear glas scales on the X, Y and Z axes 1 × through-spindle coolant system 1 × chip conveyor 1 × paper-band filtration unit (paper filter system) More information upon request.

Condition: excellent (used), Maximum machinable diameter above the bed: 575 mm Maximum machinable diameter above the slide: 525 mm Maximum machinable diameter above the small cross slide: 300 mm Distance between centers: 2000 mm Spindle passage diameter: 51 mm Number of spindle speeds: 18 Spindle speed range: 32 to 2500 rpm Ledpowlgdyofx Abneac Bed width: 400 mm Maximum cross slide travel: 305 mm Maximum upper slide travel: 140 mm Maximum tailstock travel: 150 mm Overall dimensions: 3405 x 1175 x 1345 mm Machine weight: 2200 kg

Condition: used, Available quantity: 6 units. Used power component / industrial electronics module from Alstom Cegelec for industrial automation and drive technology. Manufacturer: Alstom Cegelec Lasdpfx Ajzgf E Asbnoc Model: Minisemi-D 380 415 160 Manufacturer's part number: 029.135 724 Version: GO V3.1 Device type: Power electronics module Application area: Industrial automation Condition: Used

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Weiler Praktikant 160 B lathe with guide and draw spindle, built to toolmaker precision, year of manufacture 2001, with 3-axis digital display K&C NEW, in very good condition, CE compliant. Technical data: >> Year of manufacture 2001, machine no. 4836 >> Center height 160 mm >> Center distance 650 mm >> Spindle speeds: from 24 to 2500 rpm Lajdpfozgcnuox Abnoc >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be engaged >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference point, tool programming 200 items, taper calculation, radius/diameter, quick zeroing, switching of the counting direction >> Quick-change tool holder with collets from 3 to 28 mm, increasing in steps of 1.0 mm >> New 3-jaw chuck 160 mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> Coolant system >> Electric spindle guard >> Machine feet >> Bed stop >> Splash guard >> Operating manual, parts list About the machine: Offered is a Weiler Praktikant 160 B lathe with guide and draw spindle, year of manufacture 2001, in very good condition. A very nice lathe with a protective device for the working spindle. The slides all move very easily and smoothly. Even at high speeds, the Weiler runs smoothly. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a ground finish. The digital display from K&C makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on-site under power and convince yourself of its condition.

Condition: good (used), NHH lathe Turning diameter bed: 260 mm Turning diameter support: 160 mm Lsdpfx Abomw Ukcensac Spindle bore: 26 mm Turning lenght: 600 mm Heidenhain digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 210 h, load capacity: 16,000 kg, lifting height: 4,500 mm, free lift: 1,470 mm, mast type: triplex, construction height: 3,035 mm, fork length: 2,400 mm, empty load weight: 26,850 kg, total length: 5,600 mm, construction width: 2,540 mm, Diesel forklift Load center: 1200 Mast type: Triplex Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Lasdpfjzf Sfyox Abnjc Rear tire type: Superelastic Rear tire condition: 80 - 100% Description: Very good, like-new condition. The unit will receive a new inspection and a new certification according to UVV (German regulations for occupational safety and health). Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, roof protection, windshield, heater, air conditioning, full free lift,

Year of construction: 2019, operating hours: 210 h, condition: used, functionality: fully functional, empty load weight: 20,200 kg, fuel type: electric, total length: 5,400 mm, lifting height: 13,000 mm, mast type: simplex, construction height: 2,000 mm, drive type: Elektro, load capacity: 16,000 kg, construction width: 2,070 mm, Other Lsdpfxezf Sd As Abneac Mast type: Standard Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Description: Hydraulically adjustable boom + 60°/-9°, Non-marking tires with tread, Charger internally installed, Battery with water filling system, Mobile head (new mobile head), Radio remote control for all crane movements, 2 cameras (front right and rear center), Distributed counterweights (removable with pallet truck), Aluminum protective boom tip 11 t, Aluminum boom extensions 7 t, Operator cabin with door, Warning light, Fire extinguisher

Condition: good (used), Heavy-duty lathe, lathe, lathe, lead and tension spindle lathe, lead and tension spindle lathe, automatic lathe Lasdpjha Hvvjfx Abnec -Manufacturer: WMW, automatic lathe type DRT 50m -Turning length: 550 mm -Turning Ø over bed: 530 mm -Spindle bore: Ø 63 mm -Spindle speeds: 9 - 450 rpm -Three jaw chuck: Ø 200 mm -Turret: with accessories, see photos -Drive motor: 5.3 / 6.8 kW -Dimensions: 2420/1040 / H1460 mm -Weight: 2200 kg

Condition: good (used), Variator pulley, Vario adjustment pulley, Vario belt pulley, PIV gearbox, Vario gearbox, variable speed pulley, variable pulley, expansion pulley, V-belt pulley adjustable Laedpfx Abewz U Ulonec -Manufacturer: Lenze, Vario belt pulley with compression spring -Type: Simplabelt 11.213.016 -Outer pulley diameter: 160 mm -Diameter of the inner socket: 18 mm -Dimensions: Ø160 x 110 mm -Weight: 3.4 kg

Condition: excellent (used), ALKO 160P clean air extraction system - used Air filtration using filter hoses, Cleaning performed pneumatically, Dust-tested, Movable collection container ----- Technical Data ----- Extraction nozzle diameter: 160 mm, Nominal volume flow: 1,448 m³/h, Max. negative pressure: 2,503 Pa, Number of bags: 1 piece, Motor: 2.2 kW, Compressed air connection: 8.5 bar, Dimensions (L x W x H): 1,700 x 840 x 2,050 mm, Weight: 340 kg Quality information: - Complete basic inspection - Complete basic cleaning Lodpfjzf H E Iex Abnoac - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: excellent (used), Height adjustment for vise (28660) Mounting surface for vise diameter 180 mm Hole distance 145 mm Mounting surface for workbench 180 x 135 mm Weight 10.5 kg Laedpsw Ic Hhjfx Abnoc

Condition: excellent (used), Year of construction: 2005, Welcome We offer Thermoregulator - thermostat for injection molds - model HB THERM 160 U1 - series 4 Technical data: Manufacturer: HB - THERM Type: HB - 160U1 Lasdpfevyuvujx Abnoc Year of production: 2005 Medium: Water Temperature: 160° C Heater power: 8 kW